Udarni drobilnik Kleemann SHB14-1000

Stanje: pripravljen za uporabo (rabljen), Bobenski motorji rabljeni bobenski motorji Fodpfxsi A Apuo Aflopb velika zaloga za širino traku 300-1400 mm

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Fpsdpfxopn I H Tj Afleb Znamka: Svedala Tip: 36/H/MC Vključuje: osnovno šasijo in oljno enoto

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Fodpfx Afsiuky Islopb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Fjdpfx Ajvwlqqsflopb Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Fpedpfxeh Nyfye Aflob

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilec Kleemann Znamka: Kleemann Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Fsdpeu S Tqvofx Aflepb Vklj.: električni motor Teža pribl.: 38 ton

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Fpjdou Nw Ezepfx Aflob Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: dober (rabljeno), Infeed opening: 620 x 350 mm Rotor diameter x width: 1,060 x 610 mm Hard rock intake: up to 180 mm Limestone intake: up to 300 mm Fsdpfslgzrhex Aflspb Complete with electric drive, discharge conveyor, and steel construction

Stanje: rabljeno, approx. 15 t available Fpedpfx Aodc A Siofljb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 92 880 13, complete system: with feed hopper, discharge chute, feed conveyor belt, MFL-VORTEX impact crusher, discharge chute under the crusher Fjdolhrufopfx Aflopb