Stroj za razmaščevanje na vodni osnovi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 34.744 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 258 032, skupna masa: 11.500 kg, prebijalna sila: 20 t, natančnost pozicioniranja: 0,07 mm, premer orodja: 89 mm, TECHNICAL DETAILS Machine force: 196 kN (20 t) Air pressure: 5 bar Air flow: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Iedpfsyn Nybox Adkehw Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 rotation: No rotation possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Stanje: rabljeno, Straightening machine, strip straightening device with adjustable geared motor LENZE This straightening machine/strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type: 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely adjustable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz Ihedpfx Adedzp U Aokew - Pair of pull rollers, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper section of straightening rollers is mechanically adjustable - Straightening unit with 3 rollers, one roller is missing (rollers in the straightening unit are not driven) - Mounted on a stable metal frame - The straightening machine was used for cardboard approx. 350 x 1.5 mm Required space (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 1.500 kg, dolžina vilic: 1.100 mm, skupna masa: 3.350 kg, skupna dolžina: 3.100 mm, skupna širina: 1.000 mm, TEHNIČNI PODATKI Dvižna zmogljivost: 1.500 kg Dolžina vilic: 1.100 mm PODROBNOSTI O STROJU Ihedpfx Adoyt Nl Iskow Dimenzije & Teža Dimenzije (D x Š x V): 3.100 x 1.000 x 2.000 mm Teža: 3.350 kg OPREMA Polnilec

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wave soldering system with comprehensive equipment! A spare parts package valued at approximately €20,000 is included in the sale and delivery! The system consists of the following components: - Seho Wave Soldering System MWS 2340-F - Fluxer SelectFlux - Streamline Transport System incl. lifts TECHNICAL DETAILS Preheater PULSAR: 2x convection and 5x Pulsar preheating zones (3,300 mm length) Wetting length of soldering unit: 40 mm + 30 mm Return transport level: raised to 405 mm Finger conveyor: L-shape, short (3 mm) Iedpfx Adsyt Nlbskshw MACHINE DETAILS Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas purification system - Finger cleaning unit - Foldable convection top heating - Fan speed monitoring for convection preheating - Standard soldering aggregate - Wide solder nozzle unit, 7 hole rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen-saving circuit - Transponder system for automatic switching of soldering programs - Selective fluxing module (external module) - Flow rate sensor for flux per spray head - Flux storage tank with connections - Replacement filter for external spray fluxer module – upper system area & lower system area - Spare PC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 003002, minimalna gramatura papirja: 35 g/m², največja gramatura papirja: 209 g/m², širina papirja (maks.): 738 mm, največja višina papirja: 1.300 mm, TEHNIČNI PODATKI Maks. format papirja: 738 x 1.300 mm Min. format papirja: 210 x 297 mm Višina kupa: 1.200 mm Teža papirja: 35 do 209 g/m² Ihodpfxoyrnz Es Adkew PODROBNOSTI O STROJU Napajanje: Trifazno, 400 V Tok: 12,6 A Priključna moč: 5,3 kW Dimenzije (D x Š x V): pribl. 4.380 x 1.870 x 1.680 mm OPREMA Paletni podajalnik PFU-74F Uporabniku prijazen zaslon na dotik 6 pregibnih žepov Prvi pregib z nožem in 2 žepa pod nožem Drugi pregib z nožem

Leto izdelave: 1998, obratovalne ure: 297 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 200 mm, največja hitrost vrtenja: 3.000 obr/min, premer vijaka: 35 mm, številka stroja/vozila: E0195/10, Pas de prix de réserve – vente garantie au plus offrant ! Extrudeuse monovis avec seulement 297 heures de fonctionnement, y compris scie de tronçonnage et unité de tirage ! Hussmann ES35 x 30D DÉTAILS TECHNIQUES Diamètre de la vis : 35 mm Longueur : 30D DÉTAILS DE LA MACHINE Puissance moteur : 16 kW Heures de fonctionnement : 297 h Scie de tronçonnage DÉTAILS TECHNIQUES Vitesse moteur triphasé : 3 000 tr/min Puissance moteur triphasé : 0,55 kW Diamètre lame : 200 mm Iodpfx Asyrmzqjdkjhw Unité de tirage DÉTAILS TECHNIQUES Vitesse de tirage : 20/30/40/50/60 m/min Force de tirage : 11 700 / 7 800 / 5 800 / 4 700 / 3 900 N Longueur de contact : 800 mm Largeur bande max. : 160 mm Hauteur profil max. : 160 mm DÉTAILS DE LA MACHINE Puissance d'entraînement : 2 - 5,6 kW Poids : 800 kg ÉQUIPEMENT Commande électrique et électronique complète avec pupitre de commande à distance Affichage digital de la vitesse Ampèremètre Potentiomètre hélicoïdal 10 positions

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 2.500 kg, višina brušenja: 200 mm, The machine is equipped with the following processing units (for further details see attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller with 85 Shore hardness TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversible feed direction: 3 Weight: 2,500 kg EQUIPMENT - Feed table with electric height adjustment - 3 motors: 18.5 kW (25 HP) each, with SD start sanding belt brake - Touchscreen control with color display - Additional extraction connection Note: The machine is supplied without a power cable. The electrical connection must be provided by the customer. Isdpfxsyub R Ej Adkshw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, prehod palice: 34 mm, model krmilnika: Fanuc 21T Modell B, Brez minimalne cene - zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Prehod palice: 34 mm PODROBNOSTI STROJA Ihedpfxeyrf Enj Adksw CNC krmiljenje: Fanuc 21T model B OPREMA CS os levo CS os desno Približno 26 fiksnih nosilcev 2x pogonska nosilca (1x aksialni, 1x radialni) Vpenjalna glava Hainbuch levo in desno Transporter za ostružke Priročniki Opomba: Podajalnik palic ni vključen v ponudbo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Ihodpfsyrfvgjx Adksw Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 207000046, minimalna gramatura papirja: 50 g/m², največja gramatura papirja: 300 g/m², proizvodna zmogljivost: 19.680 enota/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: 143,250 EUR! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 pages/minute Printing speed A3: up to 171 pages/minute Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper Specifications Paper weight range: 50 gsm – 300 gsm Standard paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main Unit Dimensions Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter Readings A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync Iodpfx Adoyrd Rcokohw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, številka stroja/vozila: 23-07-12-045, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), premer žaginega lista: 550 mm, višina mize: 910 mm, širina reza pri vzporednem vodilu: 1.000 mm, La machine est en très bon état avec très peu de traces d’utilisation ! La machine a été utilisée pour le traitement de l’aluminium. DÉTAILS TECHNIQUES Diamètre maximum de la lame : 550 mm Largeur de coupe avec la butée parallèle CNC : 1 000 mm Iodpfjytpxnsx Adkshw DÉTAILS DE LA MACHINE Hauteur de la machine : 910 mm Puissance moteur : 7,5 kW ÉQUIPEMENTS Extension de table (longueur : 840 mm) Chariot à double rouleaux (longueur : 3 000 mm) 2 serre-joints pneumatiques à serrage rapide (plage d’utilisation : 0-90 mm) Commande à hauteur des yeux Support gabarit directement sur la commande Hauteur de coupe étendue, inclinaison de la lame comprise TIP-SERVO DRIVE Butée angulaire CNC UNO 90 Glissière transversale supplémentaire incl. connexion Rouleau d’appui avant Table à coussin d’air Dispositif de pulvérisation Remarque : La machine provient d’une liquidation d’entreprise, elle a été démontée et stockée par des professionnels.