Plošča za označevanje - plošča za ravnanje - vpenjanje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10019824, hitrost rezanja: 110.000 mm/min, Obseg rezanja okroglega jekla pri 90°: 320 mm, skupna masa: 1.600 kg, dolžina tračnega lista: 5.300 mm, TEHNIČNI PODATKI Območje rezanja okroglega jekla pri 90°: 320 mm Območje rezanja ploščatega jekla pri 90°: 520 x 320 mm Najmanjša možna rezana mera (okrogla): 10 mm Najmanjša možna rezana mera (ploščata): 10 x 8 mm Hitrost rezanja: 15 - 110 m/min Dimenzija tračnega lista: 5.300 x 34 x 1,1 mm Najkrajša dolžina preostalega kosa: 40 mm PODROBNOSTI O STROJU Pogonska moč: 2,6 kW Skupna pogonska moč: 3,7 kW Klsdpfxszdi U No Abxsu Mere & teža Postavitvena mera (D x Š x V): 3.100 x 1.100 x 2.200 mm Teža: 1.600 kg OPREMA Na voljo priročniki Številni tračni listi

Stanje: novo, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. Kledpfxexqrhlj Abxsu The workbench has a replaceable, robust tabletop that accommodates all TM fixture components with a diameter of approximately 1.6 cm. This allows you to create ultimate, high-performance, compact mobile workstations. Expand your clamping and fixturing possibilities and be prepared for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for holding and clamping during welding and manufacturing. Clamp and fixate at any point on the reversible, double-sided precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm boreholes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm boreholes 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT522K) 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT634K) 2 x Magnetic V-pads for surface 2 x Locating pins, suitable for 1.5875 cm boreholes 2 x Angle brackets, 1.5875 cm boreholes (T50305) 2 x Angle brackets, 1.5875 cm boreholes (T50304) 4 x Stops, suitable for 1.5875 cm boreholes (T54203) 4 x Stops, suitable for 1.5875 cm boreholes (T54205) 4 x V-block spacers, suitable for 1.5875 cm boreholes 8 x D-stop bars, 1.5875 cm boreholes 8 x V-blocks, suitable for 1.5875 cm boreholes 10 x Ball lock bolts, suitable for 1.5875 cm boreholes 12 x Magnetic rests

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, širina mize: 700 mm, dolžina mize: 500 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Obdelovalni center z ročno vrtljivo in nagibno strojno mizo! TEHNIČNI PODATKI Premiki osi x-premik: 500 mm y-premik: 400 mm z-premik: 400 mm Miza Površina mize: 700 x 500 mm Vreteno Vpenjanje orodja: 40 SK/ISO Vrtljaji vretena: 20 - 4.500 vrt/min Pogon vretena: 12 kW Pomiki Pomiki: 5.000 mm/min Krmiljenje: Heidenhain TNC 124 PODROBNOSTI STROJA Skupna priključna moč: 13 kW Kljdpfx Ajzb Uz Dsbxju Teža stroja: ca. 2.800 kg Prostorske zahteve: ca. 3 x 2 x 2 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YS-2674, višina struženja: 1.250 mm, teža obdelovanca (maks.): 5.000 kg, premer struženja: 1.600 mm, premer čelne plošče: 1.250 mm, model krmilnika: Fanuc 0i-TD, TEHNIČNI PODATKI Premer planske plošče: 1.250 mm Največji navor na planski plošči: 12.500 Nm Višina struženja: 1.250 mm Največji premer struženja: 1.600 mm Največja teža obdelovanca: 5.000 kg Hitrost vrtenja mize: 2 - 300 O/min Pomik X-os: 1.475 mm Pomik Z-os: 900 mm Hitri pomik: 10 m/min Vretenasti konus: ISO BT50 Število mest za orodje: 12 poz. PODATKI O STROJU Krmiljenje: Fanuc 0i-TD Ksdszb Uy Topfx Abxelu Skupna moč: 75 kW Dimenzije & Teža Prostor: pribl. 4,7 x 5,8 x 5,5 m Teža stroja: pribl. 32 t OPREMA Menjalnik orodij za 12 stružnih orodij z BT 50 vpenjalom Opomba: 5.000 € za demontažo in nakladanje se nanaša na pripravo za EU-prevoz. Priprava za pomorski prevoz je možna, stroški na zahtevo.

Stanje: rabljeno, Leto izdelave: 1970, Drilling capacity in steel (diameter): 32 mm Arm reach: 1,000 mm Maximum workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. m W E B O Radial Drilling Machine Model: BR 32 V Year of manufacture: approx. 1970 Serial No. _____ Drilling capacity in cast iron/steel (through solid): max. 40 / 32 mm Boring (with 50% pre-drilled): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 steps/stepless: 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Ksdpfxot H Smye Abxjlu Horizontal travel of drill carriage: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/rev Spindle drive approx.: 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and spindle housing via hand lever • Automatic drill feed with depth stop via vernier • Stepless speed adjustment within three gear steps and 2 motor speeds, changeable via hand lever • Clockwise and counterclockwise rotation • Electro-motorized vertical adjustment of the arm via cross-switch • Ammeter for the drilling motor • Coolant unit with integrated coolant pump • Fixed drilling table approx. 800 x 600 x 600 mm high, vise, etc. Ideal machine for steel fabrication, toolmaking, and mechanical engineering! Condition: Older but good to very good – demonstration-ready Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2019, Funkcionalnost: nepreverjeno, številka stroja/vozila: 71267, skupna širina: 500 mm, skupna dolžina: 500 mm, skupna višina: 500 mm, skupna masa: 20 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Merilni volumen: 1.200 mm Natančnost: 0,015 mm Kodpszb A Dtofx Abxelu PODROBNOSTI STROJA Dimenzije in teža Postavitvene mere (D x Š x V): pribl. 500 x 500 x 500 mm Teža pribl.: 20 kg OPREMA Prenosni računalnik in programska oprema (popolnost ni zagotovljena) Transportni zaboj Opomba: Rdeče podnožje, na katerem je prenosnik, ni vključeno v ponudbo.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 70352, skupna širina: 1.200 mm, skupna dolžina: 1.200 mm, skupna višina: 1.800 mm, skupna masa: 100 kg, Brez najmanjše cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Klodpfezb A Avjx Abxju Merilni volumen: 3.000 mm Natančnost: 0,045 mm PODROBNOSTI STROJA Dimenzije in teža Postavitvene mere (D x Š x V): 1.200 mm x 1.200 mm x 1.800 mm Teža: 100 kg OPREMA Prenosnik in programska oprema (popolnost ni zagotovljena) Podnožje Transportni zaboj

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Dear Sir or Madam, Kledpfxjq H Eabj Abxeu We hereby offer a Deckel FP3 milling machine. The machine is extensively partially overhauled in our workshop and is therefore in excellent condition. Upon request, we are happy to equip the machine with safety or additional devices according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00 x 1.60 x 1.90 m (LxWxH) Weight: approx. 1500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Clamping table area: 800 x 420 mm Spindle speed range: 40–2000 rpm Spindle taper: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed speed: 10–500 mm/min Rapid traverse: approx. 1500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - You can freely choose the paint color of the selected machine - Additional accessories such as tools can be ordered together upon request - Upon request, we can supply and install further equipment such as safety devices - We are happy to organize shipping and/or on-site installation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, skupna dolžina: 18.000 mm, skupna širina: 12.080 mm, skupna višina: 3.210 mm, notranja višina: 2.750 mm, Oprema: klimatska naprava, osvetlitev, topla voda, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Kontejner je bil uporabljen kot učilnica in je v zelo dobrem stanju! TEHNIČNI PODATKI Skupna dolžina: 18.000 mm Skupna širina: 12.080 mm Skupna višina: 3.210 mm Višina prostora: 2.750 mm Nadstropja: enonadstropen Obseg dobave 11 kosov KLEUSBERG sistemskih kontejnerjev tip 3750 PLUS 1 kos KLEUSBERG sistemski kontejner tip 3750E PLUS 1 kos samonosna nadstrešnica 3000/1250 mm 1 kos kuhinjski blok, tip 3 po gradbeni specifikaciji OPREMA Klodpfx Abozddb Ssxeu Razsvetljava Klimatska naprava Topla voda Okna z izolacijskim dvoslojnim steklom Zunanje nastavljive aluminijaste žaluzije Električni radiatorji Ločene klimatske naprave za vsak kontejner Električna napeljava s strežniško omaro in patch paneli CAT vtičnice na vseh delovnih mestih Ustreza uredbi o varčevanju z energijo (EnEV 2009)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: 0-250-08-1590, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.250 mm, pomik osi Y: 1.220 mm, pomik po osi Z: 125 mm, model krmilnika: Homatic 2000 IPC, število vreten: 28, največja hitrost vretena: 24.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 - 3,250 mm Working area Y-axis: 70 - 1,220 mm Working area Z-axis: 12 - 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4 axes Console table 8 supports in X-axis, manually adjustable 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Kodpfx Abjzcda Sjxelu Note: Sale does not include the adapters, tools, and HSK holders shown in the images.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Digital Readout, Light Grey, Excellent Condition, CE Compliant!!! Technical Data: >> Year of construction: 1992 Machine no. 2203-8489 >> Fixed angular table >> Speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle carrier Kedpfxow Evq Ae Abxslu >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operating manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition and CE compliant. The machine has minimal backlash and all spindles move smoothly. The milling machine runs quietly even at maximum speeds. This model features hydraulic clamping. On this newer version of the FP4, the feed can be continuously adjusted in all three axes, and each axis is equipped with rapid traverse. A significant advantage is the active 3-axis Heidenhain digital readout, allowing input of dimensions for the machine to move to automatically. Oil has been changed, and the machine has been mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test this machine under power at our location.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, obratovalne ure: 4.624 h, vrsta upravljanja: CNC krmiljenje, najv. debelina jeklene pločevine: 2 mm, leto zadnje generalne obnove: 2012, Brez najnižje cene - zagotovljena prodaja najvišji ponudbi! Leta 2012 je Salvagnini izvedel popolno prenovo! TEHNIČNI PODATKI Največja dolžina vstopa: 1.850 mm Največja širina vstopa: 1.500 mm Največja širina izstopa: 1.500 mm Minimalna dolžina: 285 mm Minimalna širina: 190 mm Največja diagonala: 2.150 mm Največja referenčna mera: 2.000 mm Minimalna debelina pločevine: 0,50 mm Maksimalna debelina pločevine, konstrukcijsko jeklo (do 410 N/mm²): 2,00 mm Maksimalna debelina pločevine, nerjaveče jeklo (do 600 N/mm²): 1,25 mm Obdelava predlakiranega materiala: 3,00 mm Maksimalna dolžina orodja za CLA-opcijo: 1.000 mm PODROBNOSTI STROJA Tip upravljanja: CNC-krmiljenje Kjdpozb H Txjfx Abxolu Delovne ure: 4.625 h OPREMA LS Zgornji upogibni nož LI Spodnji upogibni nož Ročna nastavitev dolžine držala pločevine CLA Enota za upogibanje dolgih jezičkov HP12015 R81 Hladilna naprava

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 75 mm, stružna dolžina: 325 mm, premer struženja: 180 mm, potovalna razdalja osi X: 56 mm, pomik po osi Z: 176 mm, TEHNIČNI PODATKI Klodpfx Ajzb Ekcobxou Premer struženja nad ležiščem: 180 mm Premer struženja nad prečnim suportom: 75 mm Dolžina struženja: 325 mm Pomik X-os: 56 mm Pomik Z-os: 176 mm Območje vrtljajev: 20 - 6.300 min⁻¹ Premer ležaja vretena (spredaj): 50 mm Maksimalna podajalna sila v Z-smeri: 3.000 N Vrtina vretena: 30 mm PODATKI O STROJU Krmiljenje: Fanuc 21T Največja moč glavnega vretena: 3,7 kW Napetost: 400 V Frekvenca: 50-60 Hz Dimenzije & Teža Dimenzije (D x Š x V): 2.200 x 1.000 x 1.620 mm Približna teža stroja: 1 t OPREMA Samodejna glava Razni dodatki Vmesnik za avtomatski podajalnik palic

Stanje: rabljeno, Leto izdelave: 1974, Drilling capacity in steel (max. Ø 35 mm) Throat depth 1000 mm Workpiece height - max. 200 - 1400 mm Height adjustment 745 mm Clamping area of base plate 1200 x 930 mm Drill spindle diameter / taper 90 mm / MT 4 Drill spindle stroke 350 mm Speed range 60 - 1850 rpm Feed range 0.09 - 1 mm/rev Drive power 3.7 kW Machine weight approx. 3.7 t Space requirements approx. 2.1 x 0.9 x 3.3 m Kljdpfetv Igtex Abxou Cube table 800 x 800 x 650 mm Coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 42.400 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, največja hitrost vretena: 5.000 obr/min, stružna dolžina: 300 mm, izvrtina vretena: 79 mm, model krmilnika: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel X-axis: 800 mm Travel Z-axis: 300 mm Main drive speed range: 20 – 5,000 rpm C-axis speed range: 0 – 100 rpm Spindle bore: 79 mm Main drive torque: 200 Nm Spindle torque: 240 Nm Clamping device torque: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Tools and Tool Magazine Number of tool magazine positions: 12 Maximum driven tool speed: 6,000 rpm Tool holder: VDI 40 Clamping area in working space (W x H): 340 x 430 mm Number of T-slots as per DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Main spindle power: 27 / 20 kW Total power requirement: 50 kVA Electrical specification — voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Kodpfx Abszb Efgsxelu Workpiece loading and unloading system with 20 stations Power chuck (225 mm) Hydraulics 6x various turning tool holders 2x various live tool holders