Vijak ventilatorja rotorja izpuh vetrnice

Leto izdelave: 2022, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Lauber wood dryer with longitudinal ventilation Chamber with stacking cart Net volume: 7.2 m³ with wood temperature measuring point -> new / unused / original packaging -> immediately available (standard delivery time approx. 3/4 year) -> see detailed description in the photos Gbodpfxemidtrs Afqsg -> Collection, loading, etc. by buyer -> Transport, customs clearance and insurance by buyer

Stanje: novo, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine within seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface treatment - Easy and quick conversion from sanding to brushing - Wide range of brush types available for diverse effects and processing possibilities - Infinitely variable feed and roller speed for perfect results - Workpiece width up to approx. 1100mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132mm Table dimensions: 592x530mm Table extension dimensions (2x): 582x245mm Gbodpfx Ajwzzivjfqsg Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100mm Main motor power: 1.5 kW Feed motor power: 120W Voltage: 230V Dimensions: 1010x1060x1190 mm Weight: 155kg Optional Accessories: Texturing brush for uniform and textured surfaces Sanding flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Leto izdelave: 2023, Stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Gsdpfx Aencd Azofqebg Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina reza pri vzporednem vodilu: 1.300 mm, največja višina reza: 204 mm, glavni premer žaginega lista: 550 mm, vrsta nastavitve višine: električni, višina mize: 910 mm, dolžina pomika: 3.200 mm, moč: 5,5 kW (7,48 KM), Oprema: motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, Altendorf F45 EvoDrive Year of manufacture: 2023, new machine - Template holder at the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - 5.5 kW (7.5 HP) VARIO motor (stepless speed control) - Preparation for 2-axis scoring unit - Table extension 840 mm Gsdpevw S Hfsfx Afqsbg - Double roller carriage length 3200 mm - Mitre angle fence - CNC rip fence 1300 mm - Front support roller

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, DROZDOWSKI PRP 58 FRAME SAW with accessories: Gbjdpfx Asxawddefqeg - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Blade setter Machine after complete overhaul at the manufacturer's factory – excellent condition. Technical specifications: Horizontal clearance of saw frame: 580 mm Vertical clearance between rollers: 350 mm Stroke of saw frame: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5–2.5 m/min Blade dimensions (length x width x thickness): 815 x 70 x 1.6 mm Maximum number of saw blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of logs to be cut: 1.8 m Minimum cutting thickness (boards): 13 mm – standard (9 mm – single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall saw dimensions: 1.20 x 1.70 x height 2.10 m Total length of the assembly with track: 10.00 m Weight with standard equipment: 3500 kg

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Gbedpfx Asv Si Szjfqeg Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Leto izdelave: 1988, Stanje: skoraj kot novo (rabljeno), Lokacija Kłodawa 66-415 Pogoji dobave OSEBNI PREVZEM Stroški dostave Kupec krije stroške Začetni način Po dogovoru Opis Opombe Štiristranski skobeljni stroj, robilni stroj, spicheting stroj Gabbiani Maksimalna širina skobljanja: 160 mm Maksimalna višina skobljanja: 100 mm Minimalna dolžina elementa: 180 mm Premer vretena: 30 mm Gbedpfxjdx Elme Afqjg Število vreten: 6 Razpored vreten: spodaj, desno, levo, zgoraj, zgoraj spodaj Podajanje z gosenico: zgoraj, spodaj Gladko nastavljiva podajalna hitrost: 4–34 m/min Možno je delo s podajanjem pod kotom: 0°–30° Podajanje z kardanskimi pogoni Ročna nastavitev višine vretena Nastavljive glave v vseh smereh Avtomatsko mazanje vodil Vsa ležišča zamenjana s teflonskimi Stroj po popolnem servisu Stroj je prilagojen za proizvodnjo parketa in letev Priključki za odsesovanje: 6 x 120 mm Napajanje: 400 V Skupna moč: 26,2 kW Dimenzije stroja Dolžina: 4060 mm Širina: 1500 mm Višina: 1200 mm Pomembno: vsa mizna površina strojno skobljana in izravnana, nastavljivi koti.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: GUS 71 Typ 26.813, Frame saw by Wusterer & Dietz including: Frame saw Saw blade tensioner Splitting wedge Roller conveyor for frame saw 4-strand puller Godpfjv Ummbex Afqebg Inspection possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, I am selling a 4-sided brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year of manufacture 2005 Working width: 1200mm Working height: 200mm Total weight: 2500kg Configuration: Side sanding heads left - right, H.170mm 2 lower heads left - right, nylon B.140mm Gbjdpod Raqkjfx Afqsg Oscillating top head B.260mm Large sanding heads top - bottom B.1150mm Machine comes complete with all heads as shown in the pictures. Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: Gjdpfxjtykw Se Afqobg - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment - Roller conveyor included - Condition: as new The machine can be inspected and tested if you are interested. If you have any questions, please feel free to contact us.