Vibracijski žleb Jöst 3500-500 FUF

Stanje: rabljeno, Leto izdelave: 2016, Overview Bdodpfstz H T Dsx Abgek This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minimal signs of use. The system is still installed and connected, and therefore can be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/Flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders - Modern wide zipper/conveyor Scope of Supply - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject unit, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject unit - System for nitrogen or other inert gas injection, including measurement system - Dust extraction system - Euro-slot - Smooth sealing system

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno), številka stroja/vozila: Reg Nr. 976, Machine designation: Used mixing dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Year of manufacture: 2002 Rotational speed: 107 rpm Material: Stainless steel Bdedpfxjitcvuj Abgjk Drive motor: 5.5 kW Version: EExdellCT4 Total capacity: 235 litres Product-contact parts: Stainless steel 1.4571 Gearbox: Helical geared motor Equipment: Double jacket, mechanical seal, shaft heating Dimensions: L 3400 x W 1100 x H 1500 mm Unladen weight: approx. 1,600 kg Technical documentation: available Notes: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used, very good Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.100 mm, skupna dolžina: 1.550 mm, skupna višina: 2.350 mm, skupna masa: 1.800 kg, trajanje garancije: 6 meseci, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, Sarp Line for pasteurizing filled pasta – Hourly output: 250 to 400 kg The line consists of the following units: 1) Feed conveyor belts for pasteurizer 2) Pasteurizer model SPA610VD: electric power 1.2 kW, thermal power 120,400 cal/h (140 kW), belt width 1,000 mm, pasteurization tank length 6,000 mm, overall dimensions 10,163 x 1,600 x 2,210 mm (h), total weight 1,000 kg 3) Elevator belt model SNZ 4) Wrapping/Cooling unit model SIR4105-A 5) Complete electrical control panel The line is constructed entirely from stainless steel and has the following features: - Belt width: 1,000 mm - Pasteurizer belt speed adjustable from 1 to 3.3 meters/minute - Wrapping belt speed adjustable from 0.65 to 1.95 meters/minute - Cooling belt speed adjustable from 0.43 to 1.3 meters/minute - Pasteurization chamber temperature: 96 to 99°C - Internal temperature of wrapping unit: 65 to 70°C - Internal temperature of cooling unit: +3°C - Pasteurization time: 1’50’’ to 5’30’’ - Wrapping time: 3’40’’ to 10’55’’ - Cooling time: 7’58’’ to 24’ A suitable steam generator for this line is available but not included in the listed price. Bdsdpfx Abjui Rixjgok Electrical system: 220/400 V – 3 phase – 50/60 Hz, fully overhauled, 1-year warranty, compliant with CE and USDA standards. 1-year warranty!!! WHY BUY FROM A DEALER??? BUY DIRECTLY FROM THE MANUFACTURER!!! For more information, contact Ostoni in Italy! WE HAVE THE LARGEST ONLINE SELECTION OF MACHINES AND MOLDS FOR THE PRODUCTION OF RAVIOLI, TORTELLINI, CAPPELLETTI, TORTELLONI, GNOCCHI, PELMENI, PIEROGI, VARENIKI AND MANY OTHER PASTA SHAPES!!!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Three-lane elevator - 24-head weigher with 1L hopper - 32-head weigher with 1L hopper - KEN Hygiene System EWD 50 (Weigher auxiliary equipment washing station) - Platform with stairs Bdsdpfx Abepxm Ugsgek - Distribution tools – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set was only used for equipment testing, with approx. 100 operating hours. The line was dismantled by authorized Cabinplant and Multivac service teams.

Stanje: zelo dobro (rabljeno), Precious chocolates Coating-Trommel Edelstahl, 250 l Beschichtungstrommel, variable Geschwindigkeit, Vor- und Rücklauf, auf Edelstahlrahmen, 1-phasig Bedpfx Asl E Eizebgjdk

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Bedpfx Aog Ey Ufobgodk Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: generalkompletno obnovljen (rabljeno), Hosokawa Mikropul ACM 10 Fine Grinding Mill / Classifier Mill with New Control Cabinet and Accessories We are offering a Hosokawa Mikropul ACM 10 fine grinding mill in excellent condition – an ideal solution for precise grinding and classification of powders and granulates. Technical Data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good (completely overhauled), equipped with a newly built control cabinet Bdsdpjvn Riasfx Abgek Additional Details: • Classifier screen available: A corresponding classifier screen is also in stock. • Comparable mills: We have similar/analogous mills in stock that operate on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves production floor space • Energy-efficient: Optimized for lower power consumption • Versatile use: Suitable for processing chemicals, foodstuffs, pharmaceuticals, and more Condition and Inspection: The machine is ready for immediate operation and can be inspected by appointment. We also offer technical accessories and spare parts for seamless integration into your production process. Contact us for further information or a personalized quote.

Stanje: rabljeno, Leto izdelave: 2006, The Kahl twin-screw extruder is a machine manufactured by Kahl in 2006. It is currently stored in Germany and comes equipped with a fine material hopper, fine material discharge, fine material sack, belt unit (Type: BTK 1510-0), water dosing system, extruder, and intake air blower. The unit was completely overhauled in 2016. Additional features include dust extraction, tumbler sieve, dedusting, final packaging station, belt dryer, product hopper, tubular chain conveyor, cyclone, rotary valve, distributor, dust collection bag, exhaust air blower, airstream rotary dryer, feed table, mixer, as well as an additional intake air blower and belt dryer. Delivery condition is FCA (Free Carrier). Equipment: 1 x feed table, 1 x tubular chain conveyor, 1 x mixer, 1 x water intake system, 1 x extruder, 1 x intake air blower, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tubular chain conveyor, 1 x fine material hopper, 1 x fine material discharge, 1 x fine material sack, 1 x intake air blower, 1 x belt dryer, 1 x rotary valve, Bjdpfxsvfxqyj Abgodk 1 x dust collection bag, 1 x exhaust air blower, 1 x airstream rotary dryer, 1 x dedusting unit, 1 x tumbler sieve, 1 x dedusting, 1 x final packaging station, 1 x belt unit, type: BTK 1510-0 Completely overhauled in 2016.

Stanje: rabljeno, številka stroja/vozila: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor Bjdpfx Aek Tuxdobgedk 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Leto izdelave: 2022, Stanje: novo, številka stroja/vozila: 2022022209, Aluminium angle conveyor with substructure Conveyor length: 1500mm horizontal + 4000mm inclined Incline angle at joint: 45° Discharge height: approx. 3000mm Height of horizontal upper edge: 200mm PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC green Belt width: 400mm T30 cleats welded - pitch 300mm * Antistatic thanks to threads in the running side fabric Endless welded with stepped finger joint 40mm corrugated edge welded both sides using high-frequency welding * Clearance zone on both sides for belt guidance on the incline Crosswise arrangement: -70+35-5+180-5+35+70 Full-surface support plate Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * Optionally controllable via frequency inverter Connection 220/400V, 50Hz, protection class IP54 Including suspension construction for mounting an overband magnetic separator in the horizontal section. Bodpfx Absh Elhzsgedk