Tračna žaga

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min Dcedpsulnb Dofx Afqsr - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: dober (rabljeno), Leto izdelave: 1997, Die Maschine ist in gutem Zustand. Dcjdpspy Errofx Afqor

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), For sale: DECKEL MAHO DMU 100T Machining Centre Control: Heidenhain MillPlus Machine Condition: Very Good Year of Manufacture: 2000 Country of Manufacture: Germany Dcedelffzcepfx Afqor Machine Specifications: X-Axis Travel: 1080 mm Y-Axis Travel: 710 mm Z-Axis Travel: 710 mm Swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 32 positions (2x16 tools) High-pressure cooling Through-spindle coolant Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Documentation Machine weight: 10 tons Loading included in the price Stal-Com has been specialising for 17 years in the sale, servicing, and training for CNC machines from the DMG group. We specialise in all models of Gildemeister lathes and Deckel Maho machining centres. All machines undergo thorough technical inspections. Our machines are purchased not only by customers in Poland but also from all over Europe and parts of Asia. Each machine can be tested under production conditions, as we also operate as a machining subcontractor. After purchase, we provide operator training and can assist in setting up production of parts at the customer’s site. We work with many companies on a long-term partnership basis, supplying further machine tools as required. Stal-Com Rafał Dziendziel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales weighing up to 200 kg. Different materials can be collected in two or more adjoining press chambers, and once a chamber is full, the movable press head is simply rolled over it and the material is compacted. By compressing this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Filling opening: 1100 W x 800 H mm Press cycle time: 34 seconds Dodpsvugz Eefx Afqecr Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retention claws to minimise material spring-back Short handling times as a chamber is always available for loading Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Foils Big bags Textiles Light recyclables Additional options: Annual maintenance including safety inspection (UVV) Machine colour to RAL specification PLC control with automatic press cycle, bale-ready indicator, and key-operated emergency stop Additional press chambers (up to a total of 6) Strapping bands Power supply 380 - 400 V (3 phases) Double chamber baler, baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, rubbish press, residual waste press

Stanje: dober (rabljeno), The system was designed and configured for the washing, classification, and screening of railway ballast and mineral soils. The plant consists of the following basic units: - Feed station - Washing, classification, and screening unit - Process water treatment Djdpfsttv Diox Afqocr Details and further information available upon request.

Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw Article number: MEP SHARK 350 NC HS 5.0 Motor power: 4.0 kW Table opening: 355 mm Blade dimensions: 4640 x 34 x 1.1 mm Weight: 2,800 kg Dcsdpfji Hmcdjx Afqor Speed: 15 – 115 m/min, stepless Cutting capacity 0°: 350 / 350 x 350 mm Cutting capacity 45° right: Cutting capacity 45° left: Cutting capacity 60° right: Cutting capacity 60° left: Description: Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology. Standard features include: - Powered swarf conveyor, installable on the right or left side of the machine - Vise clamping pressure regulation - Feeder with vertical rollers for lateral material support - Clamping pressure regulation - Storage for 100 programs - Machine available with 34 mm or 41 mm blade—no extra charge

Stanje: novo, Leto izdelave: 2025, Type: Straight-cut Saw 90° Saw operation: Fully automatic Automation: Series cutting Dcsdpjdr Sabofx Afqer Max. cutting diameter Ø: 330 mm Max. cutting width: 350 mm Max. cutting height: 330 mm • Powerful carbide-capable sawing of solid material, pipes, and profiles. Effortlessly separates difficult-to-machine materials while being gentle on the tool. • Maximum productivity in continuous operation, suitable for single or multi-shift operation • Safe material transport via enclosed roller conveyor. Serrated, hardened clamping jaws and high clamping force ensure secure material positioning. The result: higher quality in your finished product. • Dynamics and power: Saw feed and material feed with servo drive via electrically frequency-controlled ball screw spindle guarantee precise cut quality without compromise. • Precision and reliability: All linear movements are guided by ball recirculating linear guides, ensuring smooth, precise, highly durable, and low-maintenance operation. • Minimal remnant lengths thanks to innovative vice system for smooth material transport.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Container capacity: 350 l, permissible operating pressure: 6 bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, flow grease quantity: 1 kg. Dcsdpfx Ajt R Trxsfqsr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, stiskalna sila: 30 t, vhodna napetost: 380 V, teža bale: 600 kg, vrsta vhodnega toka: Klimatska naprava, skupna masa: 3.000 kg, Manufacturer: Philadelphia Tramrail Model: HT30036 Year: 1996 Dedpfsm Amk Njx Afqjcr 400V/45A, 3-phase, 15 kW System pressure: 180 bar Maximum system pressure: 206 bar Manufactured from heavy-duty structural steel Average cycle time: 53 seconds Dimensions: 1980 x 1050 x 3860 mm Feed height: 1400 mm Bale chamber: 1600 x 760 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Bale press BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 75 kg. With a suitable pressing insert, it is also suitable for compressing individual metal and plastic containers, as well as cans. The bale press impresses with its easy and safe operation alongside its large loading aperture. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs and ensure material is properly returned to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Filling opening: 700 W x 698 H mm Pressing time: 24 seconds Motor: 1.5 kW 13 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for removal of bales Retention claws to reduce spring-back of material Holding device for strapping bands Quality product “Made in Europe” Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Can-crusher insert PLC control system with automatic press cycle, bale ready indicator, and key-operated emergency stop Bale ejector with strap + PLC (instead of bale trolley) Strapping bands Power supply 380–400 V (3-phase) Dcodeut Tk Hjpfx Afqjr Bale press, paper press, waste paper press, cardboard press, cardboard baler, film baler, paper bale press, waste bale press, waste press, recyclable press, waste compactor, bin press, residual waste press