Sistem za ekstrakcijo

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard Gjdpjkvnumjfx Afqjil There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination Giedpfx Aeb U Hwpjfqel - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Godpfx Aob U Hwtefqoil Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Gisdpfeb U Hwnex Afqsl Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Godob U Hwmjpfx Afqeil Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: skoraj kot novo (rabljeno), Technical Specifications Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle taper: MK 4 Speed range: [specify value] Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm Gjdpfx Aovzgm Isfqjil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Large semi-automated Polar 137 XT-Autotrim Pace Cutting System with stack lift, jogger with counting scale, gripper transport system, turn gripper, and unloader, year 2010, approx. 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height with a loading lift, placed in the jogger by the operator, jogged, and then automatically transported by the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter, where it is rotated. After cutting, the Transomat automatically deposits the stacks onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting or lowering. Jogger RAH-4 with air removal roller and discharge for rear-table feed Usable format up to 75 x 105 cm Discharge of jogged cutting stock is automatic to the rear into the STR stacking rack. The Autotrans gripper transport system then transfers the stacks to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting layers. Gripper transport system POLAR Autoturn – gripper transport for rear-table loading and turn gripper Giedpsxd U Saofx Afqel Accepts the prepared cutting stack from the stacking rack or buffer table. Via air tables, which optimize the handling process with an air cushion, the cutting material is transported directly to the rear table of the cutter and positioned precisely there. During transport, the grippers hold the cutting stack securely in place, ensuring that even aligned stacks remain exactly squared. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function, i.e., automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear-table loading), also allowing formats with a diagonal of ...

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 5211, Offer 24289 Technical Data: - Maximum cutting width: 3060 mm - Maximum cutting capacity at 45 Kp/mm²: 4 mm - Cutting angle: 1.50° - Cutting gap adjustment via adjustment screws Gsdjt Ucgaopfx Afqoil - Number of hold-downs: 15 pcs - Strokes per minute: 23 to 43 /min - Front angle gauge - Motorized rear gauge, position-controlled: 15 – 850 mm - Cutting line illumination - Electric foot switch - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3900 x H 1600 x D 2400 mm - Weight: approx. 4.5 t

Stanje: dober (rabljeno), Wohlenberg 132 TS Papierschneidemaschine Die Maschine befindet sich in sehr gutem Zustand und ist sofort einsatzbereit für die Produktion. Baujahr 2008. Sofort ab Lager verfügbar. Der Schneidbalken kann sowohl als eigenständige Einheit als auch in Verbindung mit Schneidesystemen eingesetzt werden. Die Programmgenerierung erfolgt im Menü und beinhaltet verschiedene Schneidaufgaben, z. B. Einzelschnitt, Programmierung, Mehrfachschnitt, Druck ohne Schneiden, automatische Istwertübertragung. Premium-Schneidemaschinen der Marke Wohlenberg werden am Standort Solms, Deutschland gefertigt. Besondere Merkmale der Wohlenberg Maschine: – Interaktive Benutzeroberfläche – 18,4" Touchscreen – MIS-Integration (optional) – USB-Schnittstelle – Ethernet-Schnittstelle – Betriebssystem Windows CE Giodsw D E Sajpfx Afqel – CIP-Datenmodul – Positionierung über elektronisches Handrad – Optimierter Schneidzyklus – Programmierbarer Niederhalterdruck – Automatische Anpassung des Niederhalterdrucks an die Schnittbreite – Automatischer Messerwechsel von vorne – Schneller Messerwechsel – Neuer Maschinenkörper einteilig gegossen = höhere Stabilität – Wartungsfreie elektromagnetische Kupplung Technische Daten: Schnittlänge: 1.320 mm Maximale Stapelhöhe: 165 mm Einfuhrtiefe: 1.325 mm Kleinster Schnitt mit Blech unter dem Pressbalken: 77 mm Kleinster Schnitt ohne Blech unter dem Pressbalken: 20 mm Maximale Satteleinzugsgeschwindigkeit: 300 mm/s Maximale Messermechanikleistung: 44 Hübe/min Sattel-Führung: oberhalb des Arbeitstisches Hauptmotorleistung: 4,5 kW Eigengewicht: 3.410 kg Die Maschine wird geliefert mit: Ersatzmesser, Stäben, Druckplatte, Dokumentation und Werkzeugen.

Stanje: dober (rabljeno), Wohlenberg 132 TS ASE Rezalka za papir Godpfx Aewt Sq Usfqsil Stroj v brezhibnem stanju, pripravljen za proizvodnjo. Leto izdelave: 2015. Takojšnja dobava iz zaloge. Opremljen z avtomatskim sistemom za odstranjevanje odvečne obrobe ASE. Rezalnik je mogoče uporabljati kot samostojno enoto ali v integraciji z rezalnimi sistemi. Programiranje poteka preko menija in vključuje različne rezalne naloge, npr. posamezni rez, programiranje, večkratni rez, pritisk brez rezanja, samodejni prenos dejanskih vrednosti. Premium rezalne stroje Wohlenberg izdelujejo v Solmsu, Nemčija. Posebnosti stroja Wohlenberg: – Interaktivni uporabniški vmesnik – 18,4'' zaslon na dotik – Integracija z MIS (opcijsko) – USB vmesnik – Ethernet vmesnik – Operacijski sistem Windows CE – CIP podatkovni modul – Pozicioniranje z elektronskim ročnim kolesom – Optimiziran rezalni cikel – Programabilen pritisk pritisne letve – Samodejna prilagoditev pritiska pritisne letve širini reza – Avtomatizirana menjava noža s sprednje strani – Hitro menjavanje noža – Novo, iz enega kosa ulito ohišje stroja = večja stabilnost – Brez vzdrževanja elektromagnetna sklopka Tehnični podatki: Dolžina reza: 1320 mm Največja višina kupa: 165 mm Globina podajanja: 1325 mm Najmanjši rez z vloženo pločevino pod pritisno letvo: 77 mm Najmanjši rez brez pločevine pod pritisno letvo: 20 mm Največja hitrost podajalnega sedla: 300 mm/s Največja mehanska zmogljivost noža: 44 ciklov/min Vodilo sedla: nad delovno mizo Moč glavnega motorja: 4,5 kW Neto masa: 3410 kg Stroj je opremljen z rezervnim nožem, letvami, pritisno ploščo, dokumentacijo, orodjem in transportnim trakom.