Mobilna rampa, mobilna nakladalna rampa

FERBERG

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear Dodpfxeh Hm The Aplecg - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Malo rabljeni kuvertirni stroj z naslednjimi konfiguracijami: - 2 podajalni postaji za nezgibane dokumente z veliko kapaciteto (325 listov) - 1 podajalna postaja za priloge z veliko kapaciteto (300 prilog) – OPCIJSKO Dsdpfx Aeiyx Ixeplscg - 1 podajalna postaja za kuverte (DIN Lang, C6/5 in C5 ter druge formate) - Funkcija dnevne pošte za do 5 listov - Omogočeno obdelovanje predolgih dokumentov - Dolžina papirja: 127–406 mm - Širina papirja: 127–229 mm - Formati kuvert: DIN Lang, C6/5, C5 oz. 88 x 220 do 164 x 242 mm - "Flip-Flop funkcija": Samodejni preklop, ko je dovajalni predal prazen - Samodejni nadzor dvojnega in manjkajočega vložka - Samodejna nastavitev dolžine zgiba (ni potrebe po odpiranju/nastavljanju) - Samodejna nastavitev višine naslovnega okenca - 4 načini zgibanja: enostavni, zavijalni, Z-zgib, dvojni paralelni zgib - Shranjevanje do 20 programov - Velik zaslon z grafičnim in besedilnim prikazom - Do 8 listov/kuverto - Do 3.500 taktov/uro - Števec: 249.103 taktov

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards Dodpoh Hm Tzjfx Apljcg - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), air-cooled process chiller: Refrigerant R32 Cooling capacity 72 kW at 7/12°C, internal P3 pump, integrated 410 l buffer tank, winter package for outdoor installation rated for ambient temperatures down to -25°C, includes variable-speed fans Dcsdpjf H A Eyofx Aplsg generous Dixell display with protective cover,

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Dsdpfxjwv Umwe Apljcg

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Dodpjd Nw Ttjfx Aplecg Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP

Stanje: novo, Leto izdelave: 2025, 10T Ramp, Usable Internal Width 1.7 m – TM-GROUP, the Best Choice on the Market ✅ Specification: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Width of Ramp: 1700 mm - Reinforced side railings on both sides - Ramp rollers for easy repositioning - Central handle for positioning with a forklift - Adjustable incline angle and flap height - Reinforced ramp supports on both sides - Moving parts equipped with grease nipples - Ramp additionally equipped with a winch - ELECTRIC as well as manual ramp height adjustment ✅ Drive-on Grating: Grating with anti-slip grooves. Secure and stable surface. Both forklifts and pedestrians benefit from excellent traction and stability. Competitors typically offer ramps made from sheet metal with mesh overlays. Our product uses grooved grating – a much more durable solution that ensures debris under the wheels does not remain on the ramp and the forklift does not slip. ✅ Forklift Mount – dual-sided installation: Practical and quick mounting for forklifts allows transport of the ramp in any direction. The specially developed handle also enables precise maneuvering in confined spaces. ✅ Chain for Securing to Truck, Railcar, or Fixed Warehouse Ramp: A heavy-duty steel chain provides added safety and prevents the ramp from slipping during loading and unloading. Dcjdpfx Apowa Nr Nslsg ✅ Sturdy Side Railings: Safety railings that can be removed and replaced with a frame/roof (roof optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic drive with a high-quality pump. Requires only 230V – can be connected to any standard socket. ✅ Dual-Sided Hand Pump: Hydraulic pump for height adjustment when no power supply is available – lifting function on both sides. Ideal solution for use in any conditions. ⭐️ Available Versions: ⭐️ Ramp widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus Mobile ramps with load capacities of 10, 15, 20, and 25 tons Grating thicknesses: 3 – 5 cm Colors: Red, Blue, Black, and Green (special colors upon request) Mobile ramp with tarpaulin As a manufacturer, we offer custom-made solutions according to individual requirements – in various sizes, load capacities, and variants. Need a tailor-made solution you can’t find anywhere else? Contact our specialist! Keywords: Loading ramp, unloading ramp, drive-on ramp, mobile ramp, loading station, transfer ramp, mobile loading ramp, mobile drive-on ramp.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications Dodsvf E Avspfx Aplecg - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Dodpfxova H Amo Aplscg Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, laserska moč: 4.400 W, Rabljena, zelo čista Bystronic Bystar 3015 4,4 kW naprodaj / ravna postelja industrijski CNC laser naprodaj Dsdpjr Hcmrofx Apljcg Bystronic ByStar 3015 4,4 kW Znamka: BYSTRONIC Leto: 2008 Model: ByStar 3015 Uporabna področja: lasersko rezanje Lokacija: Združeno kraljestvo Tip stroja: stroji za lasersko rezanje (CO2) Popolnoma servisiran in redno vzdrževan Krmilna enota: BYSTRONIC Tehnične informacije Znamka: BYSTRONIC Moč laserja: 4,4 kW / 4400 W Tip laserja: CO2 laser Tip laserja: BYLASER 4400 Pomiki Premik po X-osi: 3000 mm Premik po Y-osi: 1500 mm Delovne ure stroja: Ure rezanja: 9.000 Dodatna oprema: – BYPOS – CUT-CONTROL – 2 rezalni glavi (5″, 7,5″)