Šivalna glava / Spenjalna glava

Müller Martini HK 75 0881.8101

Stanje: rabljeno, Šivalna glava Müller Martini HK 75 0881.8101 Iodpfxsxlu Epe Aa Usia Serijska št.: ET029 Spletni video ogled preko WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnbergu - Na voljo takoj - Možnost testiranja

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) Iijdouf Sy Aepfx Aa Usa - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, with drop sides left & right, dimensions: approx. 1,660 x 1,250 mm Iodsg Du H Hjpfx Aa Uoia

Leto izdelave: 2002, stanje: dober (rabljeno),

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen),

Leto izdelave: 2014, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip stroja: REWER Leto izdelave: 2014 Teža: 2000 kg Napajalna moč: 14 kW Napetost: 3x400 V Delovni tlak zraka: 7 bar Navijalni material: folija OPP, PET, PVC, OPS, LDPE; debelina 40-50 µm ter karton Širina materiala: 500 mm Iedpfxskw Ufze Aa Ueia Maks. premer navitja: 800 mm, 1 gred, notranji premer tulca 76 mm Maks. premer odvijalca: 800 mm, 1 gred, notranji premer tulca 76 mm Hitrost navijanja: 0–400 m/min Maks. teža: 400 kg Smer navijanja: desno-levo ali levo-desno (obe smeri) Pridržna gred: 2 kosa, ločeno za navijalec in odvijalec Optični vodilni sistem z ultrazvočnim senzorjem: 1 kos Navijalec odpadnega materiala z mizico za spajanje: 1 kos Rezkalni modul z rotacijskim nožem Upravljalna plošča z zaslonom na dotik Adapterji premera 152 mm, 2 kosa Stroboskop s senzorjem za nadzor traku

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Type: FK-1-500 // Serial No.: 151166 // Part No.: 150.01.0001 Ijdpfx Aaed Nd T Uo Ujia

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 908108, vrsta goriva: električni, Leto izdelave: 2009, Kama Pro Cut 53 (2009) z Mabeg M1/60/400 sesalno glavo in bočnim poravnalom (2008) Popolnoma delujoče in zelo malo uporabljeno. Prosimo, pišite, da vam pošljemo video posnetek stroja v delovanju. Za rezanje, biganje, perforacijo, kiss-cutting, hladno vtiskovanje in Braillovo pisavo. Učinkovita tudi pri manjših in personaliziranih serijah. Primerna tako za tiskovine kot embalažo, ofsetni ali digitalni tisk. Prednosti: • AutoRegister, poravnava vsak list glede na tiskarsko oznako • Večnamenska uporaba za format 530 x 400 mm • Najvišja natančnost registra (manj kot 0,1 mm) • Donosna dodelava tudi majhnih naklad • Čiste rezalne konture zahvaljujoč zelo malo ali brez mikronikov • Premikajoča se zgornja miza omogoča nežno obdelavo materiala • Prostorsko varčna zasnova, potrebnih le 4,5 m² Opcije: • Motorno krmiljen sistem za nastavitev pritiska (MPC) • Prikazovalnik rezalnega pritiska z avtomatsko zaščito pred preobremenitvijo • Sistem za menjavo orodne plošče (4+1 mm) • Modul za vroče rezanje plastičnih materialov • Modul za zlatotisk ali holo žigosanje — možnost naknadnega vgradnje Tehnične lastnosti: • Material: papir, karton, plastika 80–800 g/m² • Največja velikost lista: 530 x 400 mm • Najmanjša velikost lista: 210 x 148 mm • Največja velikost reza: 530 x 390 mm • Minimalni prijemni rob: 10 mm • Višina rezila: 23,8 mm • Največja zmogljivost*: 6.000 listov/h • Največji rezalni pritisk: 120 ton • Največja višina skladanja (podajalnik): 700 mm • Največja višina skladanja (odlagalna enota): 500 mm • Dimenzije: 2,60 x 1,75 m • Neto teža: 3.000 kg * odvisno od materiala, velikosti lista in konfiguracije orodij. Pri uporabi kartonskega kompleta (opcija) ali enolistnega podajanja. Tehnični podatki in vrednosti se lahko spremenijo. Iodewh Tq Sopfx Aa Usia

Stanje: pripravljen za uporabo (rabljen), DANOBAT RTM 2500 – CNC Surface Grinding Machine | 2,500 mm Travel | 3,100 kg Table Load Capacity High-capacity CNC surface grinder, ideal for large-format and precision work. Robust, reliable, and equipped for demanding applications. 🛠 Key Technical Specifications: • Maximum grinding length: 2,500 mm • Maximum grinding width: 900 mm • Maximum grinding height: 1,000 mm • Usable table area: 2,500 x 800 mm • Maximum table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • Table speed (X-axis): 1 – 30 m/min • X-axis travel: 2,650 mm • Cross travel (Z-axis): 800 mm • Vertical travel (Y-axis): 1,150 mm • Z-axis rapid traverse: up to 8,000 mm/min • Y-axis rapid traverse: up to 1,000 mm/min • Programmable increments: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding Unit (Headstock): • Grinding wheel diameter: 500 mm • Grinding wheel bore: 203.2 mm • Maximum wheel width with recess: 100 mm • Peripheral speed: 26 m/s Ijdpshq Ui Iofx Aa Ujia • Rated speed: 1,000 rpm • Grinding wheel motor power: 15 kW • Total installed power: 30 kW ✅ Additional Features: • All axes equipped with Turcite-coated prismatic guideways • Angular grinding head • Paper band filtration unit • 4 kW hydraulic unit 📌 Industrial grinder ready for heavy-duty challenges. Perfect for workshops that require high flat machining capacity with micrometric precision.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen),