Hidravlični motor CA210

M&J/Metso Preshred 4000 - 2000

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C4652, dolžina brušenja: 5.100 mm, širina brušenja: 250 mm, skupna masa: 9.100 kg, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 9.000 mm, potrebna širina: 4.000 mm, Reform AR 51 Type 7 Surface Grinding Machine Year of manufacture: 1990 Grinding length: 5100 mm Kwjdpfx Abstqtk Aobot Grinding width: 250 mm Workpiece height: 220 mm Total power requirement: 36 kW Used water treatment system Overlift station, magnetic roller, pump

Leto izdelave: 2024, Stanje: novo, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and various other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all required machinery from us. Just ask! With Josan & Söhne Maschinenbau Profit from copper recycling! ‼️We are happy to demonstrate the machines to you live in Heilbronn! By appointment only‼️ We are a German company based in Heilbronn — German laws, warranty, and service! We also speak English! Kodoqvmpfspfx Abbowt We are happy to advise you on all recycling-related matters! Material separation solutions for all areas of recycling – just ask. Electrostatic separator for separating plastics from copper, iron, or other materials. You can also separate plastics from metals in uPVC windows. Separate plastics from sand or different types of plastics from each other. ➡️Motor: 6.59 kW ➡️Dimensions (LxWxH): 4000x1400x3000 mm ➡️Weight: approx. 1,000 kg ➡️Throughput: 150–300 kg per hour Price on request! Errors excepted Images, prices, and equipment details may vary.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 500 h, številka stroja/vozila: 22-014, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Kjdpfx Ajqabm Eebbowt Price negotiable!

Stanje: rabljeno, Leto izdelave: 2012, moč: 264 kW (358,94 KM), Stationary shredding plant M & J 4000S. Kedpeu Dkf Dsfx Abbjwt Electric drive: 2 x 132 kW 400 V AC, 50 Hz Includes base frame, hydraulic unit, and control cabinet.

Stanje: rabljeno, Eldan granuliatorius HG129 Kedpfot Uyvrsx Abbewt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors. Kwsdpfevf E Avex Abbot

Stanje: pripravljen za uporabo (rabljen),

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen,

Stanje: dober (rabljeno), -1 kos Metso M&J 4000-8 dvoosni drobilnik/šreder. S hidravlično enoto in upravljanjem v kontejnerju. S transportnim trakom za izpust in dovodno lijako. Kwsdpfx Ajxhlfrebbot

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.035 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MH0017-000100, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 1.200 mm, proizvajalec krmilnikov: fanuc, model krmilnika: 31i, delovne ure vretena: 6.000 h, Doosan NHP 8000 horizontal machining center, new, equipped with Fanuc 31i control cabinet Included equipment and options: 800x800 mm pallet centering system Hand-held coolant gun High-pressure coolant system, 70 bar, 7.5 kW with cyclone filtration Automatic tool changer Kedpfxewu Rgqe Abbowt Tool load monitoring Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe