Električni motor 5,5 kW 1440 vrt./min

Loher A132SA-4

Stanje: rabljeno, Three-phase motor, electric motor with 2 speeds - Power: 1.25/4.2 kW - Speed: 970/1460 rpm - Shaft: Ø 38 mm Gbodpfxectq Nhe Ahmsn - Mounting type: B3 - Protection class: IP 33 - Pole-changing - Dimensions: 440/350/H265 mm - Weight: 62 kg

Stanje: novo, Saw blade diameter: 370 mm Godpfed Iin Hjx Ahmobn Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: rabljeno, Räummaschine Gedpfx Ahet Hr Dfsmjbn

Stanje: dober (rabljeno), Leto izdelave: 2002, 1 x Horizontal Machining Center Mori Seiki SH 403 Year of Manufacture: 2002 Gbedpfx Ahjwyw Tujmjn Control: Fanuc MGS 501 with chip conveyor High-pressure pump 50 bar Technical Data: Travel paths: X: 560 Y: 510 Z: 510 mm Rapid traverse X/Y/Z: 42,000 mm/min Max. spindle speed: 12,000 rpm Taper: ISO 40 Tool changer: 40 positions Pallet size: 400 x 400 mm Number of pallets: 2 Table indexing: 1° Additional photos to follow. The machine can be inspected under power while in operation.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Max. bar diameter 65 mm Gbsdpfx Ahoin Hkmsmen Max. bar length 3000 mm

Stanje: novo, Number of drawers: 6 pcs. Dimensions (L x W x H): 720 x 580 x 800 mm Own weight: 100 kg Load capacity: 100 kg per drawer Robust tool cabinet with 6 lockable drawers. Drawer heights: 2 x 75 mm, 4 x 100 mm, 1 x 150 mm, and 1 x 200 mm Usable internal dimensions: 620 x 450 mm Maximum load per drawer: 100 kg !!! Fittings: 32 x boxes 75 x 75 mm 16 x boxes 75 x 150 mm 8 x boxes 150 x 150 mm 12 x long dividers 32 x short dividers Godpfx Ahevblibjmobn 1 x stacking panel

Stanje: rabljeno, Leto izdelave: 2005,

Stanje: rabljeno, Drive power 3 kW Voltage 380 V Gbsdpfxod Ihads Ahmon Current 6.8 A For further data, see the nameplate.

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Gjdpot Hw D Rofx Ahmsbn Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: zelo dobro (rabljeno), 3-phase squirrel cage induction motor Manufacturer: ABB Type: M2AA160MA 2 - IEC160 M/L 42 Electrical data: 50/60 Hz 11 kW Gbsdpohtlm Iefx Ahmen 2930 rpm IP: 55 Weight: 73 kg