Podajalniki za palice

LNS EXPRESS 220 S2

Stanje: rabljeno, TEHNIČNI PODATKI - Premer palice: 2–20 [mm] Njdpfx Aboz Dk N Esiswl - Največja dolžina palice: 3000 [mm] TEŽA IN DIMENZIJE - Potrebna površina: 3990 x 400 [mm] - Višina stroja: 850–1200 [mm]

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, 3 stružna centra Miyano ABX-51SYY2 Letnik izdelave: 2016, 2018, 2019, 2021 Naprava za podajanje materiala Alps ASR RX45/51EV Nadzorni sistem Fanuc 31i-B Njdpfjzq Aqdjx Abijwl Odstranjevalec ostankov 1 glavna vretena 1 protiveno 2 neodvisni vrtljaki, vsak z 12 položaji Y-os na obeh vrtljakih Motorizirana orodja Kompenzacija temperature Komplet orodij Naprava za podajanje materiala Alps Tool ASR RX 51Ev Navodila za uporabo Stroji so na voljo od oktobra 2026.

Stanje: rabljeno, TEHNIČNI PODATKI - Premer palice: 2–20 [mm] - Največja dolžina palice: 3000 [mm] TEŽA IN DIMENZIJE - Potrebna površina: 3990 x 400 [mm] Nsdpfxoz Dk Nxs Abiewl - Višina stroja: 850–1200 [mm]

Stanje: rabljeno, TEHNIČNI PODATKI - Premer palice: 2 – 20 [mm] - Največja dolžina palice: 3000 [mm] TEŽA IN DIMENZIJE - Potreben prostor: 3990 x 400 [mm] Njdoz Dk Nrspfx Abiswl - Višina stroja: 850 – 1200 [mm]

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6LUD00308, potovalna razdalja osi X: 620 mm, pomik osi Y: 520 mm, pomik po osi Z: 460 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 36 m/min, nazivna (navidezna) moč: 45 kVA, vrtilni moment: 180 Nm, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik 840D, višina obdelovanca (maks.): 430 mm, premer obdelovanca (maks.): 580 mm, teža obdelovanca (maks.): 300 kg, skupna višina: 3.300 mm, skupna dolžina: 3.225 mm, skupna širina: 2.256 mm, obremenitev mize: 300 kg, premer vrtljive mize: 500 mm, skupna masa: 8.500 kg, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 15.000 obr/min, delovne ure vretena: 40 h, dovod hladilne tekočine: 42 letvica, razdalja od središča mize do nosu vretena: 150 mm, moč vretenovega motorja: 3.400 W, število vreten: 1, število mest v zalogovniku orodij: 60, dolžina orodja: 250 mm, premer orodja: 127 mm, teža orodja: 7.000 g, dovod hladilne tekočine skozi vreteno: 42 letvica, kot vrtenja osi B (min.): −50 °, kot vrtenja osi B (max.): 110 °, kot vrtenja osi C (maks.): 360 °, število osi: 5, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Un capítulo termina: Nuestra última Siemens 840D en la LU 620 Nsdpfjzdf Hvsx Abiewl Con la introducción de la nueva Siemens SINUMERIK ONE, el probado control 840D, en combinación con nuestra LU 620, está disponible una vez. Máquina de demostración al precio de una máquina usada Equipamiento de la Axon LU 620 - Siemens 840D - 5 ejes simultáneos - Reglas lineales de vidrio Heidenhain en los 5 ejes - Optimizador cinemático - Husillo de accionamiento directo de 15 000 rpm con 34 kW y máx. 180 Nm (25% ED) - Paquete de producción I con 42 bar de refrigeración interna (IKZ) - Aire a través del husillo - Suministro de medios a través del centro de la mesa - Medición automática de pieza Renishaw OMP 40 - Control láser de rotura de herramienta Blum NT A-3 Split - Sistema de filtración por banda de papel - Sistema de enjuague circular en el husillo - Puerta lateral automática - 60 puestos de almacén de herramientas - SK40 - Transportador de virutas de banda articulada - Enjuague de virutas - Sistema de extracción

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Ročno čiščenje poteka s posebnimi rokavicami v sprednjem delu naprave. Učinkovitost čiščenja zagotavljata visokotlačna črpalka in posebna pršilna šoba. Pri teh napravah je mogoče za čistilno tekočino nastaviti temperaturo do 60 °C. Tlak je nastavljiv od 1 do 80 barov. Tehnični podatki: Nedpfxef A Nq Ao Abijwl Delovna površina: 950 x 700 mm Notranja višina: 450 mm Nosilnost: 70 kg, opcijsko do 150 kg Tlak pršenja: nastavljiv 1–100 bar Volumen rezervoarja: 75 litrov / grelna moč 2 kW Osnovna izvedba: • Okvir, noge, pokrov in ohišje iz nerjavnega jekla • Odstranljive plošče iz nerjavnega jekla nad rezervoarjem • Pokrov, ki se odpira navzgor, z dvema ročnima odprtinama in rokavicama • Kaljeno steklo • Sistem odpiranja/zapiranja vrat s pomočjo plinskih vzmeti • Nadzor odpiranja vrat prek varnostnega končnega stikala • Filter na sesalni strani črpalke (500 mikronov) • Nožno stikalo za upravljanje čistilne črpalke • Notranja osvetlitev • Neoprenske rokavice L 600 mm (odporne na kemikalije) • Nastavljive noge +/- 50 mm Opcijsko: • Kartušni filter iz nerjavnega jekla s črpalko (10/25/50 mikronov) • Zunanji mini pnevmatski separato olja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 270 mm, pomik osi Y: 240 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: HEIDENHAIN, kot vrtenja osi B (min.): 110 °, kot vrtenja osi C (maks.): 360 °, število osi: 5, Ta 5-osna KERN HSPC EVO je bila izdelana leta 2005. Ima hitrost vretena 50.000 vrt/min, 95-mestni zalogovnik za orodja in 24-mestni zalogovnik za obdelovance. Stroj je opremljen z upravljanjem Heidenhain iTNC530 in posebnim držalom HSK 25. Opomba: Menjalna roka potrebuje popravilo. Če iščete visokokakovostni rezkalni stroj, razmislite o KERN HSPC EVO, ki ga imamo na voljo za prodajo. Kontaktirajte nas za več informacij. • Zalogovnik za orodja: 95 mest Nodpfsx H A Nbox Abiewl • Posebno držalo HSK 25 • Zalogovnik za obdelovance: 24 mest • Menjalna roka ne deluje več, potreben je nov vodilni element/valj, glejte fotografijo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Rated torque (100%): 8 Nm Njdpfx Abswv Hnmeiswl Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via shipping company, worldwide delivery possible! Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses. Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs. Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10kg Scale resolution: 0.1μm Max. traverse speed: 150mm/s Dimensions: 900 x 750 x 950mm Machine weight: 170kg Control cabinet weight: 90kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request Retrofit 2025 Including PC and software Maximum traverse speed: 150mm/s Nwsdpfxoglp Nqe Abiel Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Sample image by manufacturer *Commissioning, on-site calibration, and training are not included

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. Nsdpfx Abeh Rdxnoiewl The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation.