Podajalniki za palice

LNS 6.68 HS - 4.4

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. Gtsdpfsfh R N Dsx Adxot The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: dober (rabljeno), LNS ECO LOAD bar feeder Gedpfjlg Aq Ajx Adxett

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod drive mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control Gtjdpfeip Uqmsx Adxst - Oil circulation lubrication Technical Data Max. press force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Clearance between uprights: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roller feeder VAMCO SP 150 Year of manufacture: 2014 Feed width: max. 150 mm Material thickness: max. 3.0 mm

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Gtedpfx Adotzyx Texst Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11779, stružna dolžina: 700 mm, premer struženja: 250 mm, moč vretenovega motorja: 26.000 W, hitrost vretena (min.): 3.200 obr/min, največja hitrost vretena: 3.200 obr/min, izvrtina vretena: 65 mm, skupna masa: 8.500 kg, includes 2x Hainbuch/Ortlieb chucks, conveyor belt, swivelling probe with 2 heads, MANUAL GUIDE dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring, wear control Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition Gtodpfxsrdy Uqs Adxjt original price approx. €300,000 !!! ATTENTION -> Sale without loader !!!

Stanje: dober (rabljeno), Leto izdelave: 1999, Deli, prikazani z roko, niso vključeni. Gtsdpfx Adswbz Tujxst

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 10870, Pressing force: 50 t Adjustable ram stroke: 16 – 51 mm Ram adjustment: 64 mm Clearance between uprights (L-R): 1100 mm Clearance between uprights (front-to-back): 250 mm Table clamping surface approx.: 1080 x 650 mm Ram clamping surface approx.: 980 x 420 mm Pass-through opening in table: 1060 x 200 mm Strokes per minute: 100 – 750 min⁻¹ Power requirement: 22 kW Machine operating hours: 16,850 h Dimensions (L x W x H) approx.: 2471 x 1278 x 3150 mm Approx. machine weight: 9 t Standard equipment: BRUDERER precision roller feed BBV 205 / 120 Gsdpfx Adsuqd Absxett

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Gtjdjw Rl S Sjpfx Adxjt Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: rabljeno, Leto izdelave: 2004, MORI SEIKI MT 2000 SZ Dreh-Fräs-Zentrum HERSTELLER: MORI SEIKI MODELL: MT 2000 BAUJAHR: 2004 STEUERUNG: MSG 501 SCHWENKDIAMETER ÜBER QUERSCHLITTEN: 599,5 mm SCHWENKDIAMETER: 749,0 mm FUTTERGRÖSSE: 250,0 mm SPITZENWEITE: 1280,0 mm MAX. BEARBEITUNGSDURCHMESSER: 548,6 mm MAX. BEARBEITUNGSLÄNGE: 1018,0 mm STANGENDURCHLASS: 63,5 mm C-ACHSE: 0,001° SPINDELDREHZAHL: 4500 U/min SPINDELMOTOR: 20 PS SPINDELANSCHLUSS: A2-6 ZWEITSPINDEL STANGENDURCHLASS: 43,18 mm ZWEITSPINDEL MOTOR: 10 PS ZWEITSPINDEL DREHZAHL: 6000 U/min WERKZEUGWECHSLER-KAPAZITÄT: 60 Positionen REVOLVER: 12 Stationen B-ACHSEN-WEG: +/- 120° Y-ACHSE: +/- 78,7 mm AUSSTATTUNG: - CNC-Stangenlader - Teileförderer - Werkzeugvermessungsfühler - Y-Achse - Hochdruckanlage - Späneförderer - Vollständiger Satz an Handbüchern - Umfangreiche Werkzeugausstattung Godpfjuq Iwpsx Adxett

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 Gsdpfxsuhbbzs Adxstt FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES - Control: Fanuc Oi-TD - 3-color status light - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer