Električni 4 -kolesni viličar

Linde E50HL-01/600

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 8.160 h, nosilnost: 5.000 kg, dvižna višina: 6.016 mm, prosto dvigovanje: 1.500 mm, tip droga: triplex, gradbena višina: 3.100 mm, vrsta pogona: Elektro, Electric 4-wheel forklift Load centre: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Rear tyres type: Superelastic Rear tyres condition: 20 - 40% Battery voltage: 80V Battery capacity: 840Ah Battery year: 2018 Hodpfeunnlhex Ab Tofr Side shifter, fork positioner, extended forks 3rd valve, 4th valve, rear work lights, front work lights, heater, load backrest, full cabin,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Control: Siemens Sinumerik 840D Working Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Toolholder: Front: Capto Size C6 – Multifix D1 Rear: Boring bar holder with clamping claw Distance between centers: 3000 mm Main spindle drive Digital AC motor power – 60% duty cycle: 46 kW Number of gearbox stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / bore (standard): 11 / Ø 132 mm Spindle Ø in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / bore (option): A11 / Ø 164 mm Spindle Ø in front bearing: 210 mm Speed range (constant V): 1 – 1600 rpm Cross Slide Feed range, cross: 0.001 – 1000 mm/min Feed range, longitudinal: 0.001 – 2000 mm/min Thread pitches: 0.01 – 999.999 mm Rapid traverse, cross/longitudinal: 5/10 m/min (with centers distance 4000 mm) Feed force, cross: 16,000 N Feed force, longitudinal: 22,000 N Turning tool section: 40 × 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Morse taper: 6 Mk Electrical Equipment Three-phase current: 400 V, 50 Hz Manufactured according to VDE and EMC guidelines EN50081-2 / EN50082-2 Interference suppression class A per EN50081-2 For TN-S or TN-C systems/industrial power networks without residual current device protection (RCD) Dimensions Hfsdpoxgdfbefx Ab Ter Machine (L × W × H): 2.88 m + centers distance × 2.55 m × 2.32 m Machine weight (Centers distance / Approx. weight in kg) 3000 mm: 10,900 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 6.300 h, nosilnost: 5.000 kg, dvižna višina: 3.700 mm, prosto dvigovanje: 150 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.804 mm, dolžina vilic: 2.400 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče bremena: 600 Tip droga: standardni Stanje: pripravljen za uporabo in popolnoma delujoč Tehnično stanje: zelo dobro Tip prednjih pnevmatik: super elastične Tip zadnjih pnevmatik: super elastične Hfjdex Aw U Iopfx Ab Tsr Bočni pomik, nastavljiv nosilec vilic, 3. ventil, 4. ventil, delovni žaromet zadaj, delovni žaromet spredaj, ogrevanje, polna kabina, varnostna luč, LED,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 9.893 h, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 3.354 mm, vrsta pogona: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Sideshift, Hfodpfx Abjwnz Rao Tjr 3rd valve, 4th valve, heater, full cabin, air conditioning,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Hodpfew An Uhex Ab Tjfr Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 2.735 h, nosilnost: 5.000 kg, dvižna višina: 4.610 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.600 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče tovora: 600 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: zelo dobro Sprednje pnevmatike tip: superelastik Stanje sprednjih pnevmatik: 80 - 100% Zadnje pnevmatike tip: superelastik Hsdpox A I Tbsfx Ab Tofr Stanje zadnjih pnevmatik: 60 - 80% Baterija volt: 80V Tip baterije: PzS Leto izdelave baterije: 2021 Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil, sprednji delovni žaromet, ogrevanje, STVZO, polna kabina, popoln prosti dvig, sedež,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 10.776 h, nosilnost: 5.000 kg, dvižna višina: 3.700 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.704 mm, vrsta pogona: Elektro, Electric 4-wheel forklift Hedpfx Abswggwcs Tsfr ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Sideshift, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Stanje: dober (rabljeno), Leto izdelave: 1999, Manufacturer: Tauring Model: DELTA 50 CNC Control: TAURING CNC-S Year of manufacture: 1999 Shaft length: 115 mm Max roll diameter: 175 mm CNC-C stands for Computerised Compact Numerical Control. Due to the compact design enabled by state-of-the-art technology and a competitive price, it has been possible to achieve a powerful, reliable, and versatile product. Tauring bending machines can be equipped with this unit, which enables the production of any regular or irregular geometrical bend shapes. When fitted with the CNC-C unit, the machine automatically carries out up to 30 programmed steps in a single pass (i.e., 30 bends of different radii within the same bar), simply by entering the required radius and segment length in millimetres for each part of the shape. Hedswp Idvspfx Ab Tofr Specifications Metric | US Standard ----- Horizontal and Vertical bending (H+V) Shaft diameter: 115 mm Number of rolls: 3 Control: TAURING CNC-S Estimated dimensions: Length: 1,400 mm Width: 1,400 mm Height: 1,400 mm Weight: 780 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Consequently, no representations or contractual terms are implied. We recommend verifying all important details.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 8.540 h, nosilnost: 5.000 kg, dvižna višina: 4.400 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.350 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče nosilnosti: 600 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tip droga: Standardni Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Prednje pnevmatike tip: Superelastične Prednje pnevmatike velikost: 355/45-15 Stanje prednjih pnevmatik: 40 - 60 % Zadnje pnevmatike tip: Superelastične Hfodpfx Aboxwfrwe Tsr Zadnje pnevmatike velikost: 23x9-10 Stanje zadnjih pnevmatik: 20 - 40 % Baterija Volt: 80V Tip baterije: PzS Letnik baterije: 2022 Stranski pomik, nastavljive vilice, 3. ventil, 4. ventil, sprednja delovna luč, gretje, STVZO, popolna kabina, popolni prosti dvig, CE certifikat, sedež,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 10.481 h, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 3.454 mm, vrsta pogona: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Sideshift, Hsdpewdk Nkjfx Ab Tjfr 3rd valve, 4th valve, heater, full cabin, air conditioning,

Stanje: rabljeno, Leto izdelave: 1983, Nominal force: 2,500 t Stroke: 600 mm Cycle time: 13 - 18 s Upright distance: 1,720 mm Distance table/ram, at max. stroke up, adjustment up: 2,600 mm Table surface: 1,720 x 1,800 mm Permissible continuous load: 4,000 t Hsdpewmf Tvsfx Ab Tofr Impact force: 5,000 t Ram surface: 2,100 x 1,320 mm Table ejector: 40 t Table ejector stroke: 250 mm Table ejector surface: 900 x 820 mm Ram ejector: 6 t Ram ejector stroke: 40 mm Spindle diameter: 425 mm Drive power: 900.0 kW Weight: 335.0 t Space requirement (WxDxH): 3.4 x 4.6 x 9.7 m Height above floor level: 8.3 m Fully automatic forging line / spindle wedge press with automation for production of flange shafts For hot forming only Features: reversible squirrel-cage asynchronous motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for feeding-forward, marking, tool change, feed-in device, tilting device, loading and unloading arm, turntable, oil circulation lubrication, centralized grease lubrication Cycle time approx. 13 - 18 s Dismantled and stored – as is, WITHOUT commissioning

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 545 h, nosilnost: 5.000 kg, dvižna višina: 5.515 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.400 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče tovora: 600 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Vrsta droga: Triplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Hfsdpfjxuw Swox Ab Tjr Tehnično stanje: Nov Sprednje pnevmatike tip: Non Marking Stanje sprednjih pnevmatik: 80 - 100% Zadnje pnevmatike tip: Non Marking Stanje zadnjih pnevmatik: 80 - 100% Napetost baterije: 80V Tip baterije: PzS Leto izdelave baterije: 2021 Stranski pomik, 3. ventil, 4. ventil, delovne luči spredaj, gretje, STVZO, popolna kabina, popoln prosti dvig, CE certifikat, sedež,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 12.364 h, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 3.454 mm, vrsta pogona: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Hfodpfxjwfvlye Ab Tor Battery voltage: 80V Sideshift, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2600-109101 / Schaltschrank: 6700-101707, skupna masa: 550 kg, nosilnost: 12 kg, proizvajalec krmilnikov: ABB, model krmilnika: IRC5 M2004, vhodna napetost: 400 V, vhodni tok: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & operator panel, IRB 2600-12 / 1.85 Year of manufacture: 09/2017. Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Hfsdpfx Abjucx Hde Tsr Controller cabinet: ABB IRC5 M2004. Year of manufacture: 11/2014 Used, fully equipped, in very good condition, tested and can be demonstrated. (For further details see the nameplates.) We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. A demonstration of the robot can be arranged. Packaging and loading included.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 9.887 h, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 3.454 mm, vrsta pogona: Elektro, Electric 4-wheel forklift Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery year: 2017 Hfodpfx Ajwdk Ndob Tjr Description: Camera Sideshift, 3rd valve, 4th valve, heater, full cab, air conditioning,