Kovaška stiskalnica

LASCO SKP 2500

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20992, Spoštovani, predstavljamo vam priložnost za nakup vakuumske peči IPSEN VTTC-324, letnik 1988. Tehnične značilnosti vakuumske peči: - Nazivna moč (Sn): 165 kVA - Nazivna napetost (Un): 400 V, 50 Hz - Nazivni tok (In): 240 A - Uporabne dimenzije komore: 450 mm x 600 mm x 900 mm - Moč grelcev: 120 kW - Napetost grelcev: 43 V, 50 Hz - Tok grelcev: 1613 A - Temperaturno območje: 350 – 1320 °C Gtsdpfx Afswah R Roqst - Absolutni vakuum: 1 x 10⁻⁵ (difuzijska črpalka) - Absolutni tlak: 5 bar Skupaj s pečjo prejmete tudi veliko rezervnih delov in dodatne opreme za proces toplotne obdelave (posoda za plin, grelci, večje število krmilnikov, polnilniki ipd.). Za vse dodatne informacije me, prosim, kontaktirajte.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse Gtjdpfexp Hmaox Afqot - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: dober (rabljeno), Leto izdelave: 1989, skupna višina: 6.450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Gjdpfort Uc Eex Afqstt Working capacity: 40 kJ Max. blow frequency: 98 rpm Max. usable blows per minute: 41 Max. ram stroke: 790 mm Machine is dismantled Technical specifications available on request

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 00287, Technical Data Manufacturer: Brown & Sharpe Model: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring Range X = 1000 mm Y = 1500 mm Z = 900 mm Measuring Table Length = 2280 mm Width = 1145 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning available! We will be happy to provide you with a detailed quotation. Note: Our offer is aimed exclusively at professional customers. Gtodpfx Afji Dpggjqot (Specifications, data, and prices are subject to change and error. Prior sale reserved!)

Stanje: novo, The KNUTH Sinus 400/1500 D is a robust universal lathe in the category of conventional lathes, renowned for its high machining efficiency. Featuring a one-piece, heavy cast iron bed and a spindle bore of 105 mm, this machine is ideal for machining long workpieces or large flanges. Technical highlights include a removable gap bridge for workpieces with diameters up to 1035 mm, high precision and smooth operation, as well as rapid traverse on two axes for quick positioning. Safety features such as overload protection and the automatic lubrication of the main spindle ensure reliable operation. The manual design provides a direct power transmission between the motor and the spindle, enhancing performance. If you are interested in the Sinus 400/1500 D, you can now submit an inquiry or obtain further information about this universal lathe in the category of conventional lathes. Gjdpfjq Rdp Aox Afqjtt

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Gtsdpsd Nb A Nofx Afqjt Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes Gedpfx Aod Hxx Aefqott - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Stanje: rabljeno, HYDRAULIC PRESS CAMP 250t Double-column press Piston stroke: 500 mm Gtedpfxegr Ur Rj Afqjt Table size: 570 x 570 mm Distance from table to piston: 600 mm Distance between columns: 570 mm Approach speed: 95 mm/sec Working speed: 7.5 mm/sec Return speed: 135 mm/sec Motor power: 30 HP

Leto izdelave: 2006, Stanje: dober (rabljeno), Superturbo-Ofen, Modell Pulsar, 180 m³, intermittierender Typ mit einer Brenntemperatur bis 1150°C und einer Höchsttemperatur von 1200°C, ausgestattet mit 24 Hochgeschwindigkeitsbrennern. Gtodpfx Aehgkdqsfqjt

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 570 mm Turning length 2000 mm Control system Total power requirement 15 kW Machine weight approx. 3.5 t Space requirements approx. m O F F E R We are pleased to offer you, ex stock and subject to prior sale and errors: SEIGER CNC Cycle-controlled Universal Lathe Gjdpfougawfsx Afqett Model SLZ 570 / 2 x 2000 Year of manufacture 1999 981 01x _____ Swing over bed 570 mm Swing over cross slide 340 mm Centre distance / Turning length 2,000 mm Travel X-axis / Z-axis 260 / 2,050 mm Spindle bore 65 mm Spindle speeds (2-step) stepless 1 – 2,500 rpm Max. torque 1,600 Nm X-axis feed max. / rapid traverse 7,000 mm/min Z-axis feed max. / rapid traverse 10,000 mm/min Feed force X-axis / Z-axis 7,000 / 10,000 N Tailstock quill stroke / taper 160 mm / MK 5 Spindle drive 16 kW Total drive approx. 20 kW - 400 V – 50 Hz Weight approx. 4,000 kg Accessories / Special Features • The machine can be operated manually using electronic handwheels or automatically via the CNC 2-axis cycle control HEIDENHAIN - Manual Plus M with graphic-aided, dialog-guided programming. The current axis positions with remaining distance are indicated on a color monitor, along with data input for cut values, cutting speeds (including constant), and target points (absolute & relative). • Simple and rapid workshop programming thanks to pre-programmed, graphically displayed cycles of all kinds. Additional ICP and DIN programming for HEIDENHAIN installed. • MULTIFIX universal tool holder, size C, with quick-change holders • Manual 3-jaw chuck Ø 250 mm (spindle nose size 8) with robust chuck guard • Manual tailstock with MK 5 quill and quill stroke • 1 closed steady rest Ø approx. 135 mm, 1 travelling, open steady rest Ø approx. 125 mm • Coolant system with chip conveyor • Movable safety doors with interlocks, work light • Central lubrication, operating tools, operating manuals Condition: Good, under power and ready for demonstration! Ideal for job shops, single part or small batch production! Delivery: Ex stock, immediate, FCA Metzingen Payment: strictly net, upon receipt of invoice Always a selection of CNC machining centres in stock – please ask for alternatives as well!