Linck vrata vpenjanje avtomobilov

Linck

Stanje: pripravljen za uporabo (rabljen), Bobenski motorji rabljeni bobenski motorji Duedpfx Aei A Apuefljl velika zaloga za širino traku 300-1400 mm

Stanje: novo, Leto izdelave: 2025, Heating output / nominal heat output: 21 kW For spaces of approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2% Dedpfxshvibzs Afljul Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits of the 1st BImSchV (Federal Immission Control Ordinance).

Stanje: rabljeno, dzinēji – 55 un 55 kW padeves motors – 7,5 kW augstuma regulēšanas motors – 1,1 kW griešanas augstums – 200 mm griešanas platums – 350 mm zāģripas diametrs max. – 300 mm vārpstas diametrs – 2 x 60 mm uzmavas diametrs – 2 x 70 mm sliežu platums – 350 mm kopējā jauda – 119 kW elektriskā padeves regulēšana automātiskā centrālā eļļošana elementa minimālais garums – 600 mm elektriskā augstuma regulēšana vārpstas augstuma regulēšana seši augšējie spiediena rullīši pneimatiskie stiprinājumi pieci pretatsitiena mietiņi lineāls uzgaļa diametrs – 220 mm vārpstas apgriezienu skaits – 4500 apgr./min iekārtas izmēri (garums/platums/augstums) – 275 / 235 / 210 cm svars – ~7000 kg Padevējs: max. griešanas garums – 1850 mm min. griešanas garums – 800 mm max. materiāla garums – 2500 mm min. materiāla garums – 600 mm max. materiāla platums – 700 mm max. materiāla augstums – 200 mm rullīšu platums – 700 mm rullīšu diametrs – 130 mm rullīšu skaits – 26 3 gludi spiediena rullīši 4 zobaini uzvelkošie rullīši padeve regulējama ar invertoru 0–70 m/min Dodewrw D Repfx Afleul zāģa vadotņu centrālā eļļošana zāģa motoru jauda – 2 x 9,2 kW padeves motora jauda – 1,5 kW disksāna motoru jauda – 3 kW ķēdes motora jauda – 1,1 kW izmēri (garums/platums/augstums) – 7050 / 2100 / 1850 mm

Stanje: rabljeno, various types available Dujdpfxodc A Sbe Aflsl

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Dsdpfx Afsv Umb Eoleul Inspection possible by appointment.

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Vibratory Trough / Shaking Trough by Mogensen Excellent condition – barely used 4 units available Length: 1150 mm Width: 530 mm Dusdpjmf Tk Asfx Afljl

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Dsdpfx Afjihpn Noleul Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) Duodpfx Ajhw Ng Iofljl USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 625 mm, Hundegger joinery line with mechanization 5 axes Working width: 625 mm Duodpov Ubtcsfx Aflol with tooling

Stanje: rabljeno, številka stroja/vozila: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Max. projection of main saw blade: 135 mm Number of clamps: 10 Second flexible pressure beam: yes Rotating station: yes Duodpfx Aeiwbfujflol