Stroj za brušenje stranic zob
LIEBHERR LCS 282

Name: LIEBHERR LCS 282
Brand: LIEBHERR
Availability: InStock

Leto izdelave

1999

Stanje

Rabljeno

Lokacija

Metzingen

Stroj za brušenje stranic zob LIEBHERR LCS 282

Podatki o stroju

Oznaka stroja:: Stroj za brušenje stranic zob

Proizvajalec:: LIEBHERR

Model:: LCS 282

Leto izdelave:: 1999

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Metzingen

Pokliči

Podrobnosti ponudbe

ID oglasa:: A16566806

Referenčna številka:: 1049-575487

Posodobitev:: nazadnje dne 17.07.2024

Opis

Maximum wheel diameter: 280 mm
Wheel width: 330 mm
Module - max.: 5
Module - min.: 1
Control unit: LIEBHERR CNC
Total power requirement: 28 kW
Machine weight: approx. 12 t
Space requirement:

LIEBHERR
CNC-controlled gear grinding and profile grinding machine
Model: LCS 282
Year of manufacture: 1999 # 1099

-----

Max. workpiece diameter: 280 mm
Module: 1 - 5
Helix angle: +/- 35°
Distance from table center to tool center: 15 – 285 mm
Vertical grinding slide stroke: 330 mm
Shifting/traversing stroke: 200 mm
Minimum number of teeth: 7
Grinding spindle position above table (min./max.): 70 - 360 mm

Dujdpfxet Hwu Ao Ai Uou
Clamping length of workpiece: 420 up to max. 620 mm
Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm
Speed of worm wheel/profile tool: 2,500 – 10,000 rpm
Maximum table speed: 750 rpm

Spindle drive: 28 kW
Total drive capacity: approx. 50 kW – 400 V – 50 Hz
Total weight: approx. 12,000 kg

Accessories / Special Features

• LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible)
• Equipped with automatic threading device for positioning the grinding wheel in the tooth gap
• The machine operates with three grinding processes:
a. Generating grinding using CBN worm wheels = fastest processing
b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy!
c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method
• Automatic shifting of worm grinding wheel and automatic positioning of profile wheel
• Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible.
• Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm
• Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor
• No original coolant system (due to central supply), and no dresser provided.

Condition: good to very good – under power and ready for demonstration, compact design!
Delivery: ex stock – as inspected
Payment: strictly net – after receipt of invoice

We appreciate your interest – over 200 gear machines constantly in stock.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2005

215 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7123 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Nemčija

682 km

Stroj za brušenje stranic zob
LIEBHERRLCS282

Pokliči

Mali oglas

5-osni obdelovalni center MIKRON HPM 800 U

Brügg

600 km

5-osni obdelovalni center
MIKRONHPM 800 U

Pokliči

Stanje: zelo dobro (rabljeno), MIKRON HPM 800 U je 5-osni obdelovalni center za preciznost, visoko natančnost in zanesljivost. Miza 630×440 mm, 5 T-utorov, nosilnost 800 kg; hodi X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, razdalja 600 mm; 115 orodij, max premer 80 mm (160 prostih), dolžina 350 mm. 0–20000 min⁻¹; pomik 0–20000 mm/min; hitri pomik 45 m/min; pospešek 6 m/s²; pomična sila 6000 N; 3×400V 50Hz; 55 kW; teža ~15000 kg; mere 3505×3100×2980 mm. Oprema: visokotlačno hlajenje, papirnat filter, 2 paleti, merilna sonda za obdelovanec, laserski nadzor orodja, transporter za ostružke. Za ozke tolerance v avtomobilski, letalski, medicinski in urarski industriji. Dujdpfxjyxn E Sj Ai Ueu

Poglej podrobnosti

Mali oglas

Cestona

1.398 km

CNC stružnica
GEMINISGHT4 G2 700x2000

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2006, Znamka: GEMINIS Model: GHT4 G2 700x 2000 Krmilje: FANUC 21 TB Razdalja med konicami: 2000 mm Ø nad posteljo stroja: 720 mm Ø nad vozičkom: 470 mm Ø vretena: 104 mm Največja teža obdelovanca med konicami: 2.560 kg Dujdpfx Aijxdub Ie Uju Vretenov nos: DIN 55027-11 Število vrtljajev glavnega vretena: 0-1600 min⁻¹ Skupna moč: 28 kW

Poglej podrobnosti

Mali oglas

Cilindrični brusilni stroj - Universal TOS Hostivař BUA 20

Nemčija

614 km

Cilindrični brusilni stroj - Universal
TOS HostivařBUA 20

Pokliči

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° Djdpfeu Ng Dgsx Ai Usuu - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Poglej podrobnosti

Mali oglas

Metzingen

506 km

Oblikovalec zobnikov
LORENZLS 400

Pokliči

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Dedpet Hww Dsfx Ai Ujuu Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Poglej podrobnosti

Mali oglas

Univerzalni obdelovalni center DMG MORI CMX 50U

Rain

417 km

Univerzalni obdelovalni center
DMG MORICMX 50U

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2017, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, 5-Axis Machining Center DMG MORI CMX 50 U including Robot Year of manufacture: 2017 Control: Siemens Operate Technical Data Travel distances: x-axis: 500 mm y-axis: 450 mm z-axis: 400 mm b-axis: -5 to +110° c-axis: 360° Main spindle: Tool holder: SK 40 Speed range - main spindle: 20 - 12,000 rpm Drive power - main spindle (100/40%): 13 / 9 kW Worktable: Table size: D 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30m/min Operating hours: Spindle hours: Dusdpfsy Ry N Tex Ai Uou Technical features & accessories: - Direct absolute measuring system in x, y, and z incl. air purge Blow air switching via M-function Production package including: Internal coolant supply 12 bar Chip conveyor, tank 250 L Enclosed cabin roof Tool changer door can be opened Signal lamp Probe PP40 Tool measurement TS27R Tool breakage monitoring Robot: ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings were replaced in autumn 2025.

Poglej podrobnosti

Mali oglas

Stroj za rezkanje zobnikov - vertikalni GLEASON- PFAUTER P 2400/2800

Nemčija

650 km

Stroj za rezkanje zobnikov - vertikalni
GLEASON- PFAUTERP 2400/2800

Pokliči

Stanje: rabljeno, Leto izdelave: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Flexible and Universal Gear Hobbing for Large Gears Dsdpjwzypnofx Ai Ueuu Large gear hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears serving various industries: wind turbines, industrial gearboxes, mining and marine applications, gear manufacturing, and more. The guideways are wide and fitted with hydraulically preloaded guides, used in combination with separate linear guidance systems and backlash-free rollers. This ensures precise slide movements during every feed operation. The work table’s design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, combined with the proven backlash-free double worm gear drive, guarantees precise table movements and highest flatness as well as concentricity accuracies—regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized hob heads for external and internal gears are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hob heads. The drive’s power range anticipates future tool developments. Naturally, the hob head drive is backlash-free as well. These machines are particularly suited for the use of state-of-the-art cutting materials, whether dry or wet machining is preferred.

Poglej podrobnosti

Mali oglas

Stroj za rezanje spiralnih stožčastih zobnikov KLINGELNBERG C 28 P

München

340 km

Stroj za rezanje spiralnih stožčastih zobnikov
KLINGELNBERGC 28 P

Pokliči

Mali oglas

CNC cilindrični brusilni stroj - Universal M. + M. Mai GmbH MBF 453U

Großbettlingen

508 km

CNC cilindrični brusilni stroj - Universal
M. + M. Mai GmbHMBF 453U

Pokliči

Mali oglas

Konzolni regal 3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

Bad Feilnbach

293 km

Konzolni regal
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

2.550 €

VB plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm Duedoqt Dmyopfx Ai Ueu - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Poglej podrobnosti

Oglašujte tukaj