Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev

Lider Lowbed 5 Axles

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Ihedpfsqxbcnex Adksw Za više informacija kontaktirajte nas.

Stanje: novo, številka stroja/vozila: 3, lastna masa: 9.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: bela, Leto izdelave: 2022, Oprema: ABS, brand new Ceylan low loader semi-trailers available for immediate delivery, with double electro-hydraulic ramps, extendable outriggers, RUD hooks, 10m bed length, 85cm deck height, also available with grated ramps, EBS, 3 axles (1st liftable, 3rd steering), warranty included – DEALER: INTERDRIVE SRL - PARMA Iedpfjhzaq Rjx Adkshw

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Razpolagamo z vso evropsko dokumentacijo! Iedpfjqx Nfgex Adkehw Prikolice lahko dostavimo pod pogoji FOB, EXW, CPT, CFR ali CIF. Če ste zainteresirani, vas prosimo, da nas kontaktirate.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Ihedpfx Asizwv Nsdksw Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: novo, Leto izdelave: 2025, 5-osni nizkopodnožni priklopnik Ihodpfxorlm Txs Adkow Za več informacij nas prosimo kontaktirajte.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 Ihjdpfx Asrgzv Nodkew * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Leto izdelave: 2022, stanje: novo, Cable Stripping Machine G.R.S. 5 This is the second machine from G.R.S. that is free-standing and does not require an underframe table. Compared to the G.R.S. 4, it is more than twice as heavy, about 30% more powerful, and requires 380V for operation. Technical Data: GRS 5 10mm - 90mm Dimensions (W/H/D): 78 cm / 120 cm / 84 cm Weight: approx. 220 kg Ihjdehpcprepfx Adkew Stripping Speed: 30 m / minute Motor: 380V / 3000W Cable stripping for cables with a cross-section of 10 – 90 mm and insulation thickness up to 20 mm.

Leto izdelave: 2022, stanje: novo, Cable Stripping Machine GRS 9 Technical Specifications: - Stripping speed: 33 meters/min (forward), 23 meters/min (reverse) - Processing capacity: Ø 2 mm — Ø 80 mm - Motor power: 3,000 Watts Ihodpfx Ashpcnqjdkow - Voltage: 380 Volts - Weight: 405 kg - Dimensions (cm): 108 × 85 × 120

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Ihodpfx Adowk T Uieksw Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, prevoženi kilometri: 32.200 km, dvižna višina: 58.100 mm, Leto izdelave: 2021, Intended use: Construction Ijdstr Ntwspfx Adkohw Drive: Wheel Unladen weight: 48,600 kg Lifting capacity: 7,000 kg Serial number: 597193 Front tire condition: 95% Rear tire condition: 95% Transport dimensions (L x W x H): 15.98 x 2.75 x 3.99 m Please contact PFEIFER GROUP for further information.