FGT grafični stroji - Oblikovalnica etiket

Leomat Digitakt 330 SFR (Slitter/Rew./Flexo/Lam

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 0 278 06 1192, širina folije: 700 mm, premer valja: 700 mm, Used roll slitting machine, make: Friz. One set of knives has been resharpened. The machine is pre-owned and is sold without warranty. Inspection is possible and encouraged. Dkedpfxov Radxj Aplel Loading facilities available.

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: Dedpfxeh Eibas Aplskl For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Stroj za zgibanje za 8 strani! Proizvajalec: HEIDELBERG-Stahlfolder Tip: TI 52-4 - 4 - RD Format: 520 mm Leto izdelave: 2010 Št. stroja: 1224431350 - Neprekinjen podajalnik - Dvojni sesalni podajalni valji - 1. zgibna postaja 52 cm, 4 žepi Dsdpow I S Eyjfx Aplekl - 2. zgibna postaja 52 cm, 4 žepi - Ohišje proti hrupu - Osrednja kontrolna postaja za vse funkcije - Standardna dostava - Kompresor - Orodja, tehnična dokumentacija Cena na zahtevo, FCA ex DK Razpoložljivost: takoj! Prosimo, zahtevajte dodatne podrobne slike! Video na voljo!

Leto izdelave: 2007, stanje: rabljeno, Sewing Line Meccanotecnica Multiplex SA Dkedpfx Apst Sz T Hjlol Year of manufacture: 2007 Collating Machine: Raccoglitrice MX - Number of collating stations: 18 - Optical signature recognition - Pump(s) - Distribution unit - Distribution transfer station after 2 sewing machines Sewing Machine (1) Meccanotecnica Aster 2000 Year of manufacture: 2007 - Colour monitor - Pre-loader - Optical signature recognition - 4 + 4 opening devices - Book block separator - Book stacker: Plus stacker Sewing Machine (2) Meccanotecnica Aster 2000 Year of manufacture: 2005 - Pre-loader - Optical signature recognition (BAK) - 4 + 4 opening devices - Book block separator - Book stacker: Plus stacker

Stanje: pripravljen za uporabo (rabljen), Printing units: 2+1 flexographic printing units, maximum output with dextrin: 900 envelopes/min, paper weight: 70g/m²–120g/m². Formats: Book format min./max.: 83x120mm / 185x330mm, diagonal format min./max.: 83x120mm / 185x265mm. An on-site inspection is possible. Dodpfotq Ha Tsx Aplokl

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 23.000 h, Bobst SP 142 CER II Dsdpfxsxxypyo Aplskl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, A hose bag machine (flat bag machine with twist tie) from Honsel & Co., overhauled by PCM in 2003, is available. Roll width: 980 mm, bag length range with twist closure: 280 mm - 710 mm, bag length range as tube without twist: 710 mm - 1020 mm. Includes an auxiliary flexographic printing unit and extensive accessories for format changeover. Documentation is available. On-site inspection possible. Dedpevtqq Uofx Aplekl

Stanje: pripravljen za uporabo (rabljen), An envelope printing machine Winkel + Dünnebier 26 FF is available. An on-site inspection is possible. Dkodpfx Aetq Hbfsplol

Leto izdelave: 2025, stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Dkjdpsiklxbsfx Aplol Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us.

Stanje: novo, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other highly precise, complex 3D components. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the highly robust machine frame and rotary table deliver top quality. The user-friendly fixture system allows you to save time. Thanks to components from leading manufacturers and the use of high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. This technology reduces energy consumption and increases company profitability. The machine stands out for its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360°xn Max. vector speed: 173 m/min Max. vector acceleration: 1.73 G Positioning tolerance: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6,168 mm x 3,936 mm h = 3,700 mm Working area: 9,000 mm x 10,000 mm (safe area) Rotary table door clearance: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Controller: CNC Siemens Sinumerik 840D SK Dsdpfx Aog Adknjpljkl Display: 19-inch touchscreen Filter Capacity: 2,500 m³/h – 4 kW