Vertikalni obdelovalni center

Leadwell V-20S

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. Hedpfx Agexdc Uvsisnk 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request. Hsdpfxohzbipj Agisnk

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur Hsdpfx Agow Ephbsijnk - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: dober (rabljeno), Leto izdelave: 2008, Velikost mize 1600 x 750 mm, nosilnost mize 1500 kg, pomiki XYZ 1525 x 762 x 625 mm, Hnsdpfx Ajxwytcogiok hitri pomiki 24 m/min, moč vretena 18,5 kW, hitrost vretena 6.000 obr/min, menjalnik orodij s 40 postajami, stožčasti vpenjalni del BT50, hlajenje skozi vreteno, transporter za odrezke, krmilje Fanuc 21i.

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Hnodorpn Dvopfx Agisk Tehnični podatki so prikazani na sliki.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 655 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: Fanuc 0i-MD, dolžina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 355 mm, teža obdelovanca (maks.): 250 kg, skupna višina: 3.120 mm, skupna dolžina: 2.995 mm, skupna širina: 2.975 mm, premer vrtljive mize: 350 mm, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 15 letvica, moč vretenovega motorja: 15 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 270 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljen 5-osni vertikalni obdelovalni center s CNC FANUC 0i-MD Hjdpfx Aex N Tm Nsgisnk

Stanje: skoraj kot novo (rabljeno), Los compresores GA (W) VSD (accionados por variador de velocidad) son compresores de tornillo, de una sola etapa, de inyección de aceite, accionados por motor eléctrico, estacionarios. El sistema de refrigeración está equipado con un enfriador de aire y un enfriador de aceite. Los modelos GA VSD son compresores refrigerados por aire; el aire de refrigeración es generado por un ventilador. Hnsdpfowxwxzex Agisk Características principales: - Temperatura máxima de entrada del aire: 40°C. - Temperatura máxima de salida del agua de refrigeración: 50°C. - Temperatura del aire a la salida de la válvula de escape aprox.: 30°C. - Capacidad de aceite aprox.: 17,9 L.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Cutting length: 1060 mm Cutting angle: 2° Strokes per minute: 50 spm Motor power: 4.0 kW Machine weight: approx. 0.67 t Motorized guillotine shear, model 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness: 2.5 mm (at 400 N/mm²) Strokes per minute: approx. 50/min Cutting angle: 2° Hold-down opening: 5 mm Hedpfx Ajua Iuljgienk Factory setting for blade clearance: 0.1 mm - Digital display for back gauge - Front table support - Operating manual available

Stanje: dober (rabljeno), moč: 0,018 kW (0,02 KM), potovalna razdalja osi X: 2.200 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, skupna masa: 15.000 kg, dolžina mize: 2.600 mm, širina mize: 850 mm, največja hitrost vretena: 8.000 obr/min, Oprema: transportni trak za ostružke, FEATURES Table size: 2600 x 850 mm X-axis travel: 2200 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 8,000 RPM CNC control: Fagor 8055 - MC Motor power: 15/18.5 kW Tool magazine capacity: 40 Tool taper: BT 40 Fourth axis (IRTS rotary table): 350 mm diameter Electronic handwheel Through-spindle coolant Chip conveyor Hedpfx Ajr I Aumogisnk Air cooling Dimensions with chip conveyor (W x L x H): 4029 x 7050 x 3100 mm Weight: 15,000 kg

Stanje: rabljeno, Leto izdelave: 2015, X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Control: M 730 BM MAPPS IV Distance spindle center to table: 80 – 640 mm Distance spindle nose to table center: 70 – 730 mm Max. spindle speed: 12,000 rpm Main spindle drive power: 15 / 11 kW Tool holder: SK 40 Spindle diameter at front bearing: 80 mm Number of pallets: 2 positions Working height: 1,050 mm Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Hnedpfsx Hpytox Agiek Max. workpiece height: 900 mm B-axis: 0.001° Indexing time 90°: 1.3 sec Pallet change time: 8.0 sec Number of tool stations: 60 positions Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with adjacent pockets empty: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool change time (tool-to-tool): 0.9 sec Chip-to-chip time: 2.8 – max. 9.9 sec Maximum feed rate: 60,000 mm/min Rapid traverse (X / Y / Z): 60 m/min Total power requirement: 35 kVA Machine weight approx.: 7.9 t Space requirement approx.: 5.5 x 3.5 x 2.6 m CNC Horizontal Machining Center MORI SEIKI - NHX 4000 - Pallet changer - WITHOUT clamping towers