Naprava za obračanje posod in cevi

Lambert-Jouty CZG 10V

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Bsdpfx Aen Arm Tjbhscu Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2001 Specifications Metric / US Standard Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0 - 600 mm Multi-feed range: 0 - 9999 mm Minimum cut length: 35 mm Maximum cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Approximate dimensions: Length: 4800 mm Width: 2200 mm Bcjdpfju R R Avex Abhsu Height: 2200 mm Weight: 5200 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min. Bcodpfxjk Adl He Abheu

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Bcedpfovxwkfex Abhsu Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 5.700 mm, širina tračne žage: 41 mm, skupna višina: 1.720 mm, skupna dolžina: 2.600 mm, skupna širina: 2.400 mm, dolžina podajanja os X: 600 mm, Obseg rezanja okroglega jekla pri 90°: 400 mm, največja širina rezanja: 400 mm, višina mize: 700 mm, skupna masa: 2.200 kg, največja višina reza: 400 mm, Fully hydraulic high-performance band saw, built with extra heavy-duty construction, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for the use of both bimetal and carbide tipped saw bands. Saw unit constructed in solid polymer concrete for maximum smooth operation and extended blade life. The saw unit is guided by two vertical square columns (dual column guidance) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping by two horizontal frame clamping vices. Material feed via an integrated, non-driven roller conveyor with twelve transport rollers, allowing even short remnants to be transported easily. Year of construction: 2004 Cutting capacity round: 400 mm Cutting capacity square: 400x400 mm Automatic feed length: 600 mm Multiple automatic feed: 99999 mm Variable cutting speed: 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material table height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant piece length in automatic operation: 80 mm Bodpfjupvrxjx Abhjcu Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Additional features: - Coolant system - Full enclosure - CNC control - Idle monitoring - Saw band tracking control - Side guide rollers - Height measurement system - Light barrier

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive Bjdjhcnhmjpfx Abhjcu - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Idealarc® DC-1000 Submerged Arc Welder Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Bcjdpfx Asu Afttjbhsu Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Stanje: novo, Leto izdelave: 2024, nosilnost: 6.000 kg, Oprema: nožno daljinsko upravljanje, Welding positioner, vessel rotator with 6000 kg load capacity with hand and foot remote control Suitable for diameters from 160 mm to 4000 mm Bedpfx Abegfql Ajhjcu Drive roller diameter: 300 mm Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm Stepless speed adjustment: 50 – 2000 mm/min Motor: AC 380 V

Leto izdelave: 2020, Stanje: novo, The Sapphire is the optimal solution for the heavy industry sector when working with material thicknesses up to 200 mm. It enjoys widespread popularity among a variety of manufacturing operations – often running in three-shift patterns – as well as in all areas where maximum stability, efficiency, and process reliability are essential. Thanks to its premium configuration, the system serves as a universal tool for the highest demands and is a valuable asset for process optimization. Now in use by more than 400 industrial companies worldwide, the Sapphire cutting system demonstrates its capabilities every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch interface - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for simplified positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - PFC 6 extraction unit incl. extraction pipes - Delivery, installation, and commissioning Main features • High dynamics and precision for automated 2D & 3D cutting of sheets, pipes, and profiles • Sheet processing for material thicknesses up to 200 mm • Comprehensive cutting database for optimal operator convenience • Designed to meet the most demanding conditions in continuous three-shift operations Bjdpsf Ak N Rjfx Abhscu General technical data Drive type: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeat accuracy: DIN-EN 28206 Working table height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), 1x Drive unit with chassis 1x Idler unit with chassis and height adjustment Bcsdpfx Abofxgrdeheu - Central roller support adjustment with hand crank. - Manual height adjustment, locking with pin - Height difference adjustable from 0–350 mm - Load capacity: 2,500 kg per unit - Component diameter: 200 mm – 2,000 mm - Wheels: PUR rollers - Dimensions (L/W): approx. 1,900 mm x 460 mm - Chassis track width: 1,435 mm - Rotation speed: 0 – 2,000 mm/min - Operation: Handheld remote control and foot switch