Periferna naprava

Labotek Trockenlufttrockner DDM 5/560 (art.2284)

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), 1 unit dry air dryer with material feeder, as a stand-alone solution, on castors Ksdpfjiq Ng Rjx Akgelt Manufacturer: SOMOS / Mann + Hummel Including: feeding device Model: T200 MC2 Year of manufacture: 2014 Hopper capacity: 20 liters Hopper material: stainless steel Dry air volume: 200 m³/h Dry air temperature: max. 200°C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Oprema: dokumentacija / priročnik, Arburg 470C 1500 400 (2014) Zlata izdaja Zapiralna sila: 150 t Premer vijaka: 45 mm Ksdpfx Aex Elqrekgolt Razdalja med vodili V: 470 mm Razdalja med vodili H: 470 mm Tip: Horizontalni Pogon: Hidravlični

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with full-colour touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Klsdpfx Ajxdd Spokgjt Clamping unit Clamp force: 3,000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1,050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2,006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part release on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Dryer Ksdoumnknopfx Akgslt Wittmann Drymax C30 - 30-P Year of manufacture: 2004 Feeding units year: 2005 Available: 2 units

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 68.946 h, Funkcionalnost: popolnoma funkcionalen, V obratovanju Delovne ure: 68 946 h Sila zapiranja: 1 500 kN Enota za zapiranje: 520 H Sila/ hod odpiranja: 450 mm Fiksna/variabilna višina vgradnje kalupa: 250-550 mm Kljdjyab R Nopfx Akgjt Fiksna/variabilna razdalja med ploščami: 700-1000 mm Razmak stebrov: 520 x 520 mm Pritrdilne plošče za kalup (širina x višina): 695 x 695 mm Največja teža pomične polovice orodja: 1 000 kg Sila – hod izmetalca: 40 kN – 175 mm Čas praznega cikla: Conformt min. 1,5 s – 364 Premer polža: 40 mm Efektivna dolžina polža: 20 L/D Hod polža: 160 mm Izračunani volumen vbrizga: 201 cm³ Teža na vbrizg: 184 g PS Pretok materiala: 29 kg/h PS Tlak vbrizgavanja: 2 000 bar Čas dotlaka: 45-2000 s-bar Pretok vbrizgavanja: 214 cm³/s Hitrost vbrizga: 170 mm/s Moč – ogrevalne cone: 9,7 kW – 5 Kapaciteta olja: 160 l Teža: 6 700 kg Višina: 2 215 mm Dolžina: 4 672 mm Na voljo tudi kompletna postavitev: brizgalni stroj + WITTMANN W818-2066 (2013) robot + transportni trak Robot WITTMANN W818-2558 (2013)

Stanje: zelo dobro (rabljeno), Polavtomatski stroj za povezovanje s trakom Optimax TAS200 s nastavljivo višino mize, vrtljivimi kolesci z zavoro ter zunanjim ročnim nastavljanjem napetosti traku. Kljdpsix Iuxsfx Akget

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment Kledpsyg I Ihsfx Akgot • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Material dryer Main Tech Model: DR202MT 60 kg silo Klsdpfx Aksvcrtpegst Year of manufacture: 2018

Stanje: rabljeno, Electric pedestrian stacker, low-lift pallet truck, 'Ameise', pedestrian pallet stacker JUNGHEINRICH Type EME 112 Kodpsu Emggofx Akgslt Machine No.: 90145339 Year of manufacture: 2005 Rated load capacity: 1,200 kg Lift height: 200 mm Fork length: 1,170 mm Operating voltage: 24 Volts Total length: 1,550 mm Total width: 700 mm Height with tiller: 1,300 mm - 2 drive batteries NEW from year 2024, type 12 Volt, 55 Ah - Integrated automatic charger, type E 230 G 24/6 (24 Volt, 6 Ampere) Weight: approx. 175 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor Klsdpfx Akeyg I Egogst • Operating hours: 13,361 Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system