Šivalni/spojilni stroj za furnir

KUPER

Leto izdelave: 1995, Stanje: dober (rabljeno), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of Manufacture: 1995 S/N 3508 3179 Key Features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width for the glue thread cutting unit Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot-air heating Compressed air generation Discus for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Nedshbp Ifopfx Adtsdd Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Leto izdelave: 2025, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere globina 6000 Dodatna oprema Postelja stroja, glava z režasto šobo, nosilci za orodja za ovijanje Kompleten komplet orodja za PVC/Aluminij profile Sistem za varnost operaterja in krmilna omara Komplet šob za čiščenje profilov Odvijalec zaščitne folije in turbine za vroč zrak Ndjdpfx Adowlky Eetsd Infrardeči zaslon z lampami in kaseta za orodje Ta Barberan WM-33 je bil izdelan leta 2025. Stroj za ovijanje profilov, zasnovan za prilagodljivost, omogoča obdelavo različnih materialov, vključno s PVC in aluminijem. Podpira širok nabor vrst folij in uporablja PUR lepilne taline. Ključne značilnosti vključujejo maksimalno mehansko hitrost 60 m/min, dimenzije profilov do 300 mm širine in 120 mm višine ter skupno dolžino stroja 6000 mm. Za več informacij o tej napravi nas kontaktirajte. Vrste uporabe Druga lesnoobdelovalna oprema

Leto izdelave: 1988, Stanje: pripravljen za uporabo (rabljen), I am selling the Flader orbital brushing machine. Model: Quickwood Fladder System Working width: 1060 mm. Ndodpfx Adsf Rth Totod Mechanical adjustment of both rotation and feed speed. Well-suited for rustic brushing and patina surfaces; also capable of processing profiles. Made in Denmark by Hansen - Hundebol AS.

Leto izdelave: 2013, Stanje: rabljeno, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for the production and conditioning of 3 mm oak lamellae, with initial moisture content of 12 to max. 15% / final moisture content 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40° C above 30% RH Year of manufacture: 2013 Rated power: 7 kW / 15A Njdpfx Adevwfhiotsdd Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Capacity: The chamber holds: - 2 packs in width, each 1.10 m, with 0.20 m spacing - 1 pack in height, 1.80 m, with 0.10 m thick supporting timbers plus a 0.10 m free space - 2 packs in length, each 2.20 m, plus 0.60 m free space The chamber contains 4 stacked packages and has a gross total volume of 17.4 m³. The net capacity is 4 m³ of wood – with a wood thickness of 3 mm and stack batten thickness of 10 mm, utilizing 90% of the width for edged timber. Usable internal dimensions per chamber: Width 2.40 m x Height 2.30 m x Length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-wing swing door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heat exchanger, 50 kW, flow temperature of 80°C, return temperature 73°C - Servo-controlled supply and exhaust air flaps - Cold water spray system - Chambers operate fully automatically - K5 computer control system Dismantling: Customer location Delivery as inspected, in current condition No warranty or guarantee

Stanje: rabljeno, Leto izdelave: 2017, Država izdelave - Italija Ndedpev Nkauefx Adtod NOTRANJE MERE (ŠIRINA X GLOBINA X VIŠINA): 13.200 X 8.900 X 5.400 MM ZUNANJE MERE (ŠIRINA X GLOBINA X VIŠINA): 14.060 X 9.500 X 6.900 MM MOTORJI VENTILATORJEV: 5,5 kW s spremenljivo hitrostjo MAKSIMALNA ELEKTRIČNA MOČ ZA VENTILATORJE: 55 kW

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Nedpfx Aet Tqy Eedtjdd Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: MR1TLL97037, - Manufacturer: Cefla / Sorbini - Model: T / 20-SP-1 - Year of manufacture: 1997 - Working width: 1300 mm - Working height: 880 - 940 mm - Workpiece height: approx. 3 - 80 mm - Operator side: right - Putty application cylinder: approx. 250 mm - Metering roller, hard-chromed: 174 mm - Smoothing roller, hard-chromed: 245 mm - Reversing drive - Belt conveyance - Belt control - Length: approx. 1640 mm - Width: 2590 mm - Height: approx. 1700 mm - Feed rate: 6 - 24 m/min - Total connected load: 4.5 kW - Weight: 2,000 kg - With control cabinet - Voltage / frequency: 400 V / 50 Hz Ndedpfxjumvpfe Adted - Location: not in stock

Leto izdelave: 1995, Stanje: dober (rabljeno), UV valjčni lakirni stroj Bürkle Znamka: Bürkle Model: SAL 1300 Št. stroja: 7251 Leto izdelave: 1995 Tehnični podatki: Delovna širina: 1300 mm Debelina obdelovanca: 100 mm Delovna višina: 870 mm Podajalna hitrost: 6–30 m/min Kromirano dozirno valj: premer 174 mm Aplikacijski valj, prevlečen z gumo: premer 238 mm Maksimalni delovni tlak: 6 bar Motor: 2,2 kW, 400 V, 50 Hz, 3-fazni Ndsdpfsg Hr A Iox Adted Dimenzije za transport: 2850 x 900 x 2200 mm Teža: 1450 kg Št. zaloge: 2000360

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, skupna dolžina: 14.000 mm, skupna širina: 10.000 mm, skupna višina: 4.100 mm, CATHILD lumber dryer Nedpfx Adev Ty Upetodd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling the veneer splicing machine Kuper FW-1200E. Nedpfx Adowg Ty Rotjdd Very good condition. Available immediately.