Stroj za spajanje furnira

Kuper FWJ 920

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Fsdpfog Nn E Nex Aplegb Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Rabljeni stroj Leto izdelave: 1991 Velikost plošč: 2200 x 1100 mm z Busse aluminijastimi varčevalnimi ploščami (madeži, vidni na slikah, so zgolj optične narave; plošče so brezhibne) Skupni stiskalni tlak: 80 t Tlačni valji: 4 x 90 mm Odpiralna širina: 400 mm Teža cca. 3100 kg Fjdpox Enp Rsfx Aplegb Skupna dolžina: 2610 mm Skupna širina: 1240 mm Skupna višina: 1890 mm Motorna priključna moč: 1,1 kW Priključek za vsako elektro grelno ploščo cca. 6,6 kW Teža cca. 3,1 t Razpoložljivost: takoj Lokacija skladiščenja: Röllbach

Stanje: skoraj kot novo (rabljeno), Stroj za šivanje z nitjo in lepilom Cik-cak šivanje Fjdpjy N N Nyjfx Aplogb Grelec z vpihom zraka Upravljanje s pedalom Napajanje 380V

Stanje: rabljeno, Leto izdelave: 1997, Izvenos stojala: 920 mm Pomik: pribl. 15 m/min Debelina furnirja: pribl. 0,4 - 2 mm Potreben je priklop stisnjenega zraka Lokacija skladišča: Nattheim Fgsdjy H Hgkspfx Aplsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, hod: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a pressing force of 90 tons over 80% of the surface area. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage power unit with noise reduction and a pump for fast closing and opening. Safety features comprise a safety cable, emergency stop switch, and two-hand control. Contact us for further information regarding this machine. Machine Advantages Technical Advantages - Plate size: 3000 x 1300 mm - Stroke type: upward stroke (bottom to top) - Plate type: Elkom electronic plates - Pressing force: 90 tons over 80% of the area - Press cylinders: 6 x Ø 70 mm - Specific pressure: 2.05 kg/cm² over 100% of the area, 2.56 kg/cm² over 80% of the area - Loading/unloading side: 3000 mm - Heating system: electronic, 25.4 kW, maximum temperature 120°C Fgsdpsyalmbefx Apleb - Automatic opening with timer Additional Information Hydraulic System Two-stage power unit with submersible pump for noise reduction and lubrication of rotating parts. Pump for fast closing/opening (high flow – low pressure 35 l/min), press pump (low flow – high pressure 1.6 l/min). 2 HP electric motor Control/safety valves: maximum pressure valve, pressure holding valve (check valve), low release pressure valve (pre-release valve), and oil release solenoid valve. Control Panel and Electrical System - 2 temperature controllers for plate temperature adjustment - Pressure gauge for pressure control with automatic pressure compensation system - Main on/off switch - Two manual safety buttons for closing the press - Timer for automatic opening - Switch for selecting manual or automatic plate opening after the work cycle - On/off switch for the resistance of the upper and lower press plates Safety Systems - Timed two-hand control for closing the press - Safety cable on all four sides of the press - Plate locking mechanism for maintenance - Protective covers for the rack and pinion units - Safety stickers and warning signs - Operating and maintenance manual - CE compliant Press Structure Manufactured from composite and welded steel Equipped with a guide system with rack and pinion for precise parallel movement during plate closing/opening. Elkom Heating Plate - Electric plates with electrical heating elements - Consists of a chipboard with an aluminum plate on which the electrical resistors are mounted - Maximum working temperature: 120°C - Maximum thrust: 7 kg/cm²

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2911, Depth: 920 mm Fjdpfx Apoy Iadlslsgb Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg

Stanje: zelo dobro (rabljeno), Veneer splicing machine Model: KUPER FWJ 920 Fedpfx Astq Ey Tsplogb In very good condition.

Stanje: skoraj kot novo (rabljeno), dolžina police: 3000 mm širina police: 1300 mm število batov: 6 leto izdelave: 2004 ogrevanje z vodo teža: 3900 kg 400 V svetla višina: 400 mm oznaka CE Fgjdpjx Thnijfx Apleb