Finišna blazina

KUESTERS, KREFELD 222.53 / 3600

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, MCS Jigger High Temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Pjdpfx Adsfqmx Tsyegg Completely overhauled in 2002. Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roll diameter: 324 mm Additives tank.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Working width: 2200 mm, number of sections: 6, equipped with Beta three-roll foulard, Mahlo straightening unit, Mahlo Movicat weft insertion device for punching basis weight samples, Brückner turner winder, heat recovery in exhaust air (1x air/air stage and 1x air/water stage), and electrostatic filter for exhaust air purification. Podpfx Adspy Eufoyogg

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Na voljo so 3 stroji Nakladalni sistem: ? Inventarna številka: 21214 ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW Pgodoqn A Rnspfx Adyog ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 Podpfx Ader I Am Heyogg AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: dober (rabljeno), Leto izdelave: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, through-spindle coolant (IKZ), linear guides, and 30-position tool changer Table size 2 x 1000 x 450 mm Tool holder DIN 69871 ISO 40 Travels X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm Spindle speed range 50 – 10,000 rpm Table load capacity 600 kg Feed rate, X/Y/Z, stepless - 10000 mm/min Psdpfed I R E Nsx Adyogg Rapid traverse in all axes 30 m/min Drive power 18.5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Weight approx. 6700 kg Accessories / Special Features: • CNC contouring control SIEMENS 840 D • Dual pallet changer • 30-position automatic tool changer • Full enclosure with electrically interlocked safety doors • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller blocks for uniform absorption of high torques in all directions • Ball screw drives in all 3 axes • Meehanite cast iron machine base for precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Hinged belt chip conveyor with integrated coolant system • 4th axis prepared • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 pull stud, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Podpfx Aelbmtnodyogg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Pgedpfetwy Diox Adyog Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Leto izdelave: 2022, Stanje: novo, Offer on request Machine is immediately available Pgodpfx Adeiw Dgieyjg

Stanje: dober (rabljeno), Leto izdelave: 2008, - Control system: FANUC Series 18i-TB - Maximum bar diameter: 16 mm - Maximum main spindle speed: 12,000 rpm - Maximum sub-spindle speed: 12,000 rpm - Headstock stroke: 130 mm Pgedpfstmu Rgjx Adyjg - 3 driven tools - Turning tools: 4 + 4 - Bar feeder: FMB minimag 18/3200 A

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 140.810 h, Funkcionalnost: popolnoma funkcionalen, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar loader Annual maintenance by DMG, last service 08.07.2024: Linear guideways, thrust bearings, ball screw and adjusting nut of X1 axis renewed Linear guideways, thrust bearings, ball screw and adjusting nut of Z1 axis renewed Linear guideways, thrust bearings, ball screw and adjusting nut of X2 axis renewed Linear guideways, thrust bearings, ball screw and adjusting nut of Z2 axis renewed All telescopic cover wipers replaced. Safety window in the working area door replaced. All feed timing belts and timing belt for counter spindle drive replaced. Tool drive 1 disassembled, overhauled, cleaned, and newly fitted with bearings. Main spindle cooling fan filter mat replaced, coolant valves for turrets 1 and 2 replaced. Chuck on main spindle and counter spindle disassembled and cleaned. Machine geometry and working area remeasured and adjusted. Hydraulic filter cartridges replaced. Pneumatic filter replaced. Technical data see attachment. Machine can be inspected under power. Pgsdpfx Aeu Dg Ubsdyeg Price: €25,000 (negotiable) This offer is subject to change and non-binding. Errors and changes in technical data or equipment as well as prior sale reserved. Used machines are purchased as seen, without any guarantee claims. Delivery ex works, packaging and insurance excluded unless otherwise agreed. The price is subject to the statutory value-added tax. Payment is made, as is customary for used machines, prior to loading.