Stroj za brizganje

KraussMaffei KM300-1900C2

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 Pedoiyyf Ispfx Agxspr 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Ppsdpfot Eu Azox Agxer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Ppodpfx Asva H Amogxjr Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL Psdpjvxzw Nsfx Agxjpr - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. With a total of 62,235 operating hours, the machine is in used but operational condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Theoretical shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticising capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / nozzle contact force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open air injection rate with accumulator (option): 1,812 cm³/s • Cylinder heating power: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Maximum opening stroke: 2,100 mm • Min./max. mould height: 500–1,000 mm Ppedewzy N Uepfx Agxjr • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating capacity: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Ppedjwy U E Uspfx Agxsr Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Ppsdpfx Aeuiykdogxjr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Ppjdpsikfmhofx Agxor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1 used injection molding machine Manufacturer: NETSTAL Model: ELION800-270 Year of manufacture: 2007 Clamping force: 80 tons Tie bar distance: 410 x 410 mm Mold height (min./max.): 500 mm Pjdpswf I Hiofx Agxjpr Opening stroke: 350 mm Screw diameter: 35 mm Max. shot volume: 123 cm³ Shot weight (in PS): 118 g

Stanje: dober (rabljeno), Leto izdelave: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Controll unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP Psdpfevdqbhjx Agxepr