Stroj za brizganje

KraussMaffei KM 650-3500-700 CZ

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t Bedotunccepfx Afqslr From series production

Stanje: dober (rabljeno), Leto izdelave: 1997, Krauss Maffei Injection Moulding Machine KM 650 - 3500 C2 Year of manufacture: 1997 Fully hydraulic clamping system. MC 3 control system Plasticising unit SP 3500 Complete plasticising system for thermoplastics, version with abrasion protection, screw diameter 90 mm, with non-return valve and open nozzle. Clamping unit: Complete plasticising system for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. TECHNICAL DATA: Clamping unit: - Clamping force: 6,500 kN - Mould opening force: 346 kN - Movable platen travel force: -- Opening: 169 kN -- Closing: 144 kN Bedpfx Afsvlpcgjqolr - Mounting platen dimensions (h x v): 1,490 x 1,440 mm - Tie-bar spacing (h x v): 1,000 x 930 mm - Mould opening stroke: 1,150 mm - Minimum mould height: 600 mm - Maximum daylight: 1,750 mm - Ejector stroke: 250 mm - Ejector force: 226/285 kN Injection unit: - Screw diameter: 90 mm - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection rate: 649 cm³/s - Increased injection rate: - Electro-hydraulic equipment: - Pump motor rated power: 90 kW - Installed heater capacity: 44 kW - Number of barrel heating zones: 7 - Oil tank capacity: 1,240 l Dimensions and weight: - Net weight with control cabinet: 39.5 t - Machine dimensions (L x W x H): 9.36 x 2.65 x 2.44 m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm Blodpfxew Avafo Afqer OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 Blodpfx Afsw U N Ixeqsr • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Clamping force: 125 t Bodevytz Nspfx Afqslr Type: Horizontal Drive: Hydraulic

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 65.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.700 kN, premer vijaka: 60 mm, razmak između stupova: 630.570 mm, tlak vbrizgavanja: 1.700 letvica, injekcijska masa: 850 g, minimalna višina orodja: 280.700 mm, izmetalna sila: 70 N, hod izmetalca: 225 mm, odmični hod: 600 mm, skupna masa: 10.050 kg, moč: 56 kW (76,14 KM), Oprema: dokumentacija / priročnik, Baler in Excellent Condition Bsdpfxjwah U Ae Afqjlr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, KM 500-3500 C2 Leto izdelave: 2007 Delovne ure v avtomatskem načinu: 60.000 h Zapiralna enota Zapiralna sila: 5.000 kN Dimenzije montažne plošče: 1270 x 1310 mm Razmak med stebri: 900 x 800 mm Min./maks. višina orodja: min. 480 mm Maksimalna odprtina: 1.650 mm Vbrizgalna enota Premer polža: 80 mm Prostornina vbrizga: 1.543 cm³ Teža vbrizga: 1.404 g Tlak vbrizga: 2.205 bar Električna in hidravlična oprema Nazivna moč motorja črpalke: 90 kW Bodsw Rflrepfx Afqolr Moč gretja: 44 kW Mere in teža Neto teža z elektro omaro: 27.090 kg Mere (D x Š x V): 7,65 m x 2,55 m x 2,55 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Brizgalna enota Premer polža: 90 mm Hitrost polža: 180 o/min Zatezna enota Zatezna sila: 6500 kN Odpiralni hod: 1650 mm Maksimalni odprti svetli prehod: 3650 mm Razdalja med stebri: 1160 × 960 mm Minimalna višina orodja: 400 mm Maksimalna višina orodja: 2000 mm Izmetna pot: 210 mm Izmetna sila naprej/nazaj: 150 kN Stroj Engel DUO 4550/650 je bil izdelan leta 2011. Odlikuje ga zatezna sila 6500 kN in maksimalni odpiralni hod 1650 mm. Stroj omogoča višino orodja v razponu od 400 mm do 2000 mm ter velikost plošče 1510 × 1440 mm. Premer polža je 90 mm, kar izboljšuje njegovo brizgalno zmogljivost. Razmislite o nakupu tega hidravličnega stroja za brizganje plastike Engel DUO 4550/650. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Brizganje plastike Bledpfsxd Iawox Afqer

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Blsdpfx Afoxdd U Djqer Dimensions and Weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: rabljeno, Leto izdelave: 1996, obratovalne ure: 52.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30391, vpenjalna sila: 650 kN, skupna masa: 9.000 kg, Stroj je pripravljen za transport. Delujoč in pripravljen za uporabo. Temperirna naprava, odsesavanje, transportni trak in zalogovnik niso vključeni. Vgradna višina 250 mm. Vključno z robotom in zaščitno kletko. Bledpfx Aoxfi Sqjfqsr