Stroj za brizganje

KraussMaffei KM 160-750 CX

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Moving Platen Drive Force (opening): 45 kN Moving Platen Drive Force (closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Tie Bar Spacing (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (forward/back): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Stroke Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electro-Hydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Zones: 5 Oil Capacity: 489 l Crjdpfx Afsy Nlb Ssdsd Dimensions & Weights: Floor Space Approx.: 5.50 x 2.00 x 2.20 m Overall Weight: 8200 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pull on Moving Platen - 2 x Core Pull on Fixed Platen - Robot Interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, vpenjalna sila: 2.500 kN, premer vijaka: 55 mm, skupna masa: 8.400 kg, Hydraulic injection molding machine from 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine delivers an impressive injection pressure of 1850 bar and comes with a screw diameter of 55 mm. If you are looking for a high-quality injection molding machine, consider the HAITIAN MA 2500 III we are offering for sale. Contact us for more information on this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie-bar distance: 580 x 580 mm • Max. mold height: 580 mm Cedpfsy N Sqmex Afderd • Min. mold height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min. mold dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Slide force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 l • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 - CP053 • Features: • 15" color touchscreen • Euromap 67 robot interface • USB storage • 200 mold memory • Cycle history • Alarm tower • RFID login/password • Multilingual interface • Process graphics • Maintenance pages • Metric / imperial selectable • Included options/extras (integrated in the machine): • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial venting • Festo air blow unit • 12-zone central lubrication PSG • 4-way flowmeter • Robot interface • Including screw H 3 zones • CE-certified safety cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Stroke lengths: X 2000 mm / Y 880 mm / Z 1300 mm • Max. extractable weight: 12 kg • Power supply: 400 VAC / 50-60 Hz • Accuracy: 0.1 mm • Robot weight: 530 kg • Included: touchscreen control, USB programs, pneumatic gripper, vacuum cups, conveyor belt ready • Peripheral devices included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 l • Power: 1150 W • Inlet diameter: 40 mm • Throughput: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Movable Platen Opening Force: 45 kN Movable Platen Closing Force: 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Maximum Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force Forward/Return: 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Pump Motor Rated Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Control Zones: 5 Oil Capacity: 489 l Dimensions and Weights: Space Requirement approx.: 5.50 x 2.00 x 2.20 m Total Weight: 6600 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional Equipment: - 1x air valve - 2x core pull - Robot interface according to Euromap 67 Codpoydp D Esfx Afderd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: opening: 44.8 kN closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Crsdpfox Thzpox Afdsd Mould opening stroke: 650 mm Minimum mould height: 300 mm Total daylight (max. platen opening): 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / optional): 390 / 490 rpm Electrical and Hydraulic Equipment Pump drive power: 22 kW Installed heater power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Crsdpfey Iwlaex Afdod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture – 2007 Fully hydraulic clamping system. MC5 control with a colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Crodpfx Ajx Avhyjfdsd Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar spacing (h × v): 470 × 470 mm Mould opening stroke: 600 mm Minimum mould height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Shot volume: 251 cm³ Shot weight (PS): 228.41 g Screw rotation speed (standard/option): 295 / 355 rpm Electrical & Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycles per Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Mounting platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Min. mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd./rev.: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating power: 16 kW Cylinder heater control zones: 5 Oil capacity: 489 ltr. Dimensions and weight: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Crodpfx Aeydp Idofdjd Accessories: - Vibration isolators - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 200 t Premer polža: 50 mm Codeyz Nrfjpfx Afdord Teža izstrelka: 375 g Razdalja med drogovi V: 530 mm Razdalja med drogovi H: 530 mm Prostornina izstrelka: 412 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 13.879 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 30 mm, The machine is in good condition and features a 3-position rotary table (3x120°). Year of manufacture: 2016 Pump operating hours: 17,263 Production operating hours: 13,879 Location: Southern Germany Credjwnfw Djpfx Afded Contrary to the specification, the light curtain is not installed, as we operated the system with enclosed automation (see photos). However, the light curtain components are present and will be included in the sale. The part-specific automation and the feed hopper shown in the photo are not included in the sale. It is technically possible to convert the unit to a 2-position rotary table (2x180°). This conversion could be commissioned directly with Arburg by the buyer after purchase. Ex works sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61024546, vpenjalna sila: 800 kN, premer vijaka: 40 mm, injekcijska masa: 180 g, število vbrizgov: 1, vrsta vhodnega toka: trifazni, - Krmilni sistem MC6 Crjdpfx Ajya Egujfdod - APC