Stroj za brizganje

KraussMaffei KM 125-520 C2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 1.250 kN, skupna širina: 1.500 mm, skupna višina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 4.400 mm, Hydraulic injection moulding machine from 2003. This Krauss Maffei KM125-520C2 offers a clamping force of 1250 kN and an opening stroke of 900 mm. The machine features a screw diameter of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking for a high-quality injection moulding machine, the Krauss Maffei KM125-520C2, which we have for sale, should be considered. Please contact us for further details. • Opening force: 35 / 28 kN • Tie bar distance (H × V): 470 × 470 mm • Minimum mould installation height: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm Njdpfjylkxajx Altecw • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticising capacity (PS): approx. 22-41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil capacity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phase • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Ncodpoh Rawbefx Altow Schnecke: 22 mm Baujahr: 2004 Betriebsstunden: 200

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 67 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna masa: 5.900 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine is equipped with a take-out robot and an enclosure with a FilterFanUnit, ensuring clean operation. It is ideal for precision plastics processing and offers a mold height of 250 mm and a tie-bar distance of 825 mm. Contact us for more information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Advantages Technical Advantages of the Machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q-controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Center clamping plate set, 125 mm • Machine raised by 100 mm (heightened vibration elements) • 8 programmable digital I/Os • 6 electrical heating zones for the mold • 1 additional heating circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits Njdpfx Ajx D E Dyjltscw • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switch • Sound pressure level: 70 dB(A) | ± 3 Additional Information • Screw diameter: 45 mm • Injection pressure (max.): 1580 bar • Shot weight (max. g PS): 232 g • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg

Stanje: rabljeno, Table length 400 mm Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Ncsdpfx Alevwgq Sjtjw Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: novo, Leto izdelave: 2025, Kot upogiba (maks.): 150 °, najv. debelina jeklene pločevine: 1 mm, najv. debelina bakrene pločevine: 1 mm, ❗❗ Electric Folding Machine RED-3200/1.0/150* with Cutout ❗❗ Ncjdpfxscv R Dks Altjw Discover a new era in metalworking with our revolutionary sheet metal folding machine that seamlessly combines traditional craftsmanship with the latest technological advancements. We present a machine that not only meets but exceeds your boldest expectations. Don’t miss the chance to equip your workshop with a groundbreaking tool that eliminates the classic challenges of manual bending, offering unparalleled comfort and efficiency. Bending Machine / Folding Machine / Roofer’s Bender Polish Manufacturer PROD-MASZ / Brand new directly from the manufacturer With our folding machine, equipped with an advanced electronic control system, precision and ease of operation become standard. Now, a simple button press initiates the bending process, guaranteeing flawless results without unnecessary physical effort. Magnets mounted on the bending beam ensure the stable positioning of the sheet and enable precise dimension adjustments—the key to perfect forms. The RED 3200/1.0 mm/150* features an impressive maximum working width of 3,200 mm and can bend steel sheets up to 1.0 mm thick, with a 30% higher capacity for non-ferrous metals. The maximum bending angle of 150 degrees and the ability to cut sheets along the entire working width push the limits of precision and efficiency. Additionally, the machine offers a three-stage adjustment of the upper beam height and a range of essential accessories, including an angle protractor, angle limiter, and a rear support table for sheets -> rapid adjustment with a handwheel. Additional equipment (optional): - Stop with scale – quick adjustment via hand crank, +1,250 EUR - Rotary shear (max cutting capacity 0.8 mm / steel), +350 EUR - Manual seam closer, +75 EUR Delivery costs: 360 EUR across Germany Delivery schedule: Every Monday/Tuesday Cash on delivery or prepayment We look forward to your inquiry! -> Invoices are provided

Leto izdelave: 2007, stanje: dober (rabljeno), Rabljeni Bystronic Byspeed CNC laserski stroj 4,4 kW naprodaj Rabljeni Bystronic laserski stroji 4,4 kW naprodaj VIDEO SPODAJ: Byspeed 3015 4,4 kW Leto izdelave/namestitve: 2007 Proizvajalec: Bystronic Model: Byspeed 3015 Velikost pločevine: 3 metre x 1,5 metra / 3000 mm x 1500 mm Moč laserja: 4,4 kW / 4400 W Krmiljenje: ByVision CNC02 Avtomatizacija: ni na voljo Leto: 2007 Stanje: dobro delujoče, servisirano od novega Byspeed 3015 4400 W Marec 2010 Obratovalne ure: 44.189 h Ure rezanja: 20.490 h Ncjdpfxjgwa Sws Altow Stroj je v dobrem stanju, ves čas pod rednim servisom Bystronic UK. Vključene možnosti: Bypos avtomatsko ostrenje CutControl 2 rezalni glavi Orodja in dodatna oprema Torit odsesovalec prahu Dostava, montaža in usposabljanje možni z doplačilom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Ncodpfx Ajx D Eccsltjw Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: novo, Novo naprava MASS International Kotast transportni trak / Transportni trak L - transportni trak s fiksnim kotom 35° Hitra dobava MASS International Nsdpjhm Axgefx Altjcw Kotast transportni trak NC1 Transportni trak s fiksnim kotom in zajemnimi pločevinami v dovodnem delu Primer kot na sliki: NC 1 Dovodni del 600 mm Vzpenjalni del 1300 mm Uporabna širina 250 mm Zunanja širina 305 mm (brez motorja) Po višini nastavljiva izhodna višina 750 - 1050 mm Fiksni kot med dovodnim in vzpenjalnim delom Naklon nastavljiv Višina letvic 30 mm Razmak med letvicami 500 mm Hitrost traku 3 m/min Premično na vodljivih kolesih z zavoro Opcijsko: Druge dimenzije – glej standardni dobavni seznam Dimenzije po naročilu FDA skladen trak Spremenjena hitrost traku itd.

Stanje: novo, Leto izdelave: 2021, Laser power: 6000W / 12000W / 20000W Applicable material: Metal Condition: New Laser type: Fiber laser Cutting area: 3000*1500mm Cutting speed: 200m/min Supported graphic formats: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling method: WATER COOLING Certification: CCC, CE, GS, ISO, SGS Laser source brand: IPG/MAX Weight (kg): 11,000kg Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship series Super-dynamic response, effortlessly handles complex sheet patterns. 2. Automatic edge detection With the capability to identify irregular sheets, the edge detection time is reduced to 3 seconds. 3. Automatic nozzle changer The machine swaps its nozzle in as little as 35 seconds—saving 50% in time costs. Ncedpfx Aleg A N Scstow

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 Ncodpfxeuggb Do Altew • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.