Stroj za brizganje

KraussMaffei KM 110-750 CX

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm Rjdjv Tpxqspfx Anpoch - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Rsdjutni Repfx Anpsch Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 800 kW (1.087,70 KM), skupna masa: 4.500 kg, Oprema: kompresor, zamrzovalnik, Chiller Trane RTUB224 Cooling capacity: 800 kW Number of refrigeration circuits: 1 Roderzq Aropfx Anpsch Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C and a condensing temperature of +40°C.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Rcedpfx Ajk Rnq Nenpoh Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications Rodpfsud H Dmsx Anpoch – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Rsdpfxopdr Ais Anpsch Schließkraft 80 Tonnen Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 241.125, Funkcionalnost: popolnoma funkcionalen, Horizontalna žaga panelka proizvajalca Schelling, namenjena rezanju lesnih materialov. HPO – program za optimizacijo rezanja Izvlek žaginega lista: največ 95 mm Pomik vozička žage do 120 m/min Dolžine reza: Model FH 4 430 - 4.300 mm Možno ogledati v delujočem stanju do začetka leta 2026 (načrtovana demontaža) Največji premer žaginega lista – 350 mm Izvlek – 95 mm Rodpfx Aox Ebzdonpsch Odpiranje vpenjalca 90 mm Moč motorja žage – 15 kW Premer predrezila 300 mm Podajalna hitrost naprej do 80 m/min nazaj 80 m/min Podajalna hitrost žage naprej do 120 m/min nazaj 120 m/min

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Rcodox Ah A Aspfx Anpjh Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Leto izdelave: 2004, stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Extruder Alphatec Type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Drive: 75 kW, AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Rcjdpfx Anoiyya Aopeh Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – new control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, brand KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, ready for immediate use, with low operating hours. Equipped with electronic injection and dosing units as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally) Core pull: 1 hydraulic Needle shut-off: pneumatic Tie bar extension: 160 mm Internal pressure sensor Selector valve Rodpfx Asu Hxm Ujnpech Transport and loading can be organised Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your workshop? Or do you want to sell yours? For further information or contact options, please visit our website.