Nosilec orodja

Komet HSK63

Stanje: dober (rabljeno), Internal article no.: 24020 Ijdpfxotr A Dij Af Totb Boring head Komet Designation: ABS50 FK1 Mount: HSK-A63 Mount diameter: D25.8 mm Boring range: D23 mm

Leto izdelave: 2009, Stanje: rabljeno, Technical details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400 V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions (L x W x H): 0.7 x 0.65 x 1.7 m Iodpfx Afewp I S Hs Totb Induction shrink fit machine with water cooling (30-liter tank, integrated in housing) Application: For ultra-fast tool changes via targeted inductive heating Cooling medium: Emulsion Suitable for Ø 3–50 mm carbide (HM) and Ø 6–50 mm HSS tools Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, A similarly configured machine was recently auctioned off successfully! Bidding obligates the buyer to collect the machine on time by 31.03.2025! TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Acceleration linear X-Y-Z: 6 m/s² Feed force linear X-Y-Z: 7,000 N Maximum throat clearance: 625 mm Workpiece dimensions Maximum diameter: Ø 650 mm Maximum height: 500 mm Interference circle (A-axis) at 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent positions occupied: Ø 80 mm Tool diameter without adjacent positions: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Centering bore: Ø 32 H7 Swivel range: +91° / -139° C-axis drive type: Worm drive A-axis swivel speed: 25 rpm C-axis rotation speed: 30 rpm Table load single-sided drive: 600 kg Ijdpfxsv Hmdqo Af Totb Accuracy according to ISO 230-2 Deviation (A in X-Y-Z-A-axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Safety filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control on-time: 24,403 h Machine on-time: 23,349 h Program run time: 16,193 h Spindle hours: 13,916 h Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flush gun - Emulsion mist extraction - Scraper belt conveyor - Air blow system - Blowing air through spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Heidenhain electrical heat compensation - Heidenhain electronic handwheel

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.15, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400 kN) TECHNICAL DATA: * Capacity: 40 tons (400 kN) * Stroke rate: 125 strokes/min * Distance between table and ram: 320 mm * Adjustable stroke: 0 - 84 mm * Ram adjustment: 70 mm * Table dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction Isdpfx Asnwmh Sof Tjtb * Crankshaft made from alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Press safety valve * Safety PLC control & safety switches & light curtains (Pilz) * Four-point ram guidance * Mechanical overload protection (from 20 tons) * Pneumatic counterbalance cylinders (from 40 tons) * Manual central lubrication & used oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Additional clamping plate * Automatic central lubrication * Adjustable stroke rate with AC inverter * HMI / touchscreen control panel * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feeder) * Customized machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 11.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel distances X-axis: 850 mm Travel distances Y-axis: 700 mm Travel distances Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse X-Y-Z (linear): 35 - 35 - 35 m/min Acceleration X-Y-Z (linear): 6 m/s² Feed force X-Y-Z (linear): 7,000 N Max. throat gap: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent slots filled: Ø 80 mm Tool diameter without adjacent slots: Ø 125 mm Max. tool weight: 8 kg Max. magazine load: 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: Worm drive Swivel axis A speed: 25 rpm Rotary axis C speed: 30 rpm Table load (one-sided drive): 600 kg Accuracy per ISO 230-2 Deviation (A in X-Y-Z axes): ≤ 0.006 mm Isdpsvw Sdqsfx Af Totb Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Pre-filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control on-time: 20,178 h Machine on-time: 19,094 h Spindle run time: 11,832 h Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM touch probe - BLUM laser tool measurement - Extendable chip drawer - Swivel rotary table - Coolant spray gun - Emulsion mist extraction - Scraper belt conveyor - Air blast device - Air blow through the spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical thermal compensation (Heidenhain) - Electrical manual control module (Heidenhain)

Stanje: rabljeno, Leto izdelave: 2000, X-premik 800 mm y-premik 600 mm z-premik 500 mm Pritrdilna površina mize 1000 x 560 mm Vretenova vpenjalna glava HSK 63 A Vretenove hitrosti - brezstopenjsko 20 - 16.000 1/min Moč vretena 15 kW Navor na vretenu 9 Nm Pomiki x/y/z - brezstopenjsko 1 - 30.000 mm/min Hitri pomik 35 m/min Pomikalna sila 8000 N Izmenjevalec orodja 30 postaj Krmilje HEIDENHAIN, TNC 430 Skupna potrebna moč 32 kVA Teža stroja cca. 7,2 t Dimenzije stroja D x Š x V 2,75 x 2,30 x 2,95 m Dodatki: merilna sonda HEIDENHAIN TS 632, razni nosilci orodij, transportni trak za ostružke, hladilna naprava. Isdpfx Asxq Hf Sjf Totb

Leto izdelave: 2023, obratovalne ure: 154 h, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina: 1.690 mm Mere globina: 2.785 mm Mere višina: 1.725 mm Teža stroja: 4.650 kg Krmilna enota Znamka: MAZATROL Model: SMOOTH Ez Glavni pogon Število osi: 3 Pomiki Pomik X-osi: 215 mm Hitri pomik X-osi: 30 m/min Pomik Y-osi: 100 mm Hitri pomik Y-osi: 10 m/min Pomik Z-osi: 605 mm Hitri pomik Z-osi: 30 m/min Mediji Tlačni zrak: 0,5 do 1,0 MPa Dodatna oprema Transformator za Evropo (CE) Valjasta vodila s sferičnimi valjčnimi ležaji SD pomnilniška kartica I/F + USB pomnilniški vmesnik 1 komplet tipk za krmiljenje Temeljni komplet (jeklene plošče) CE oznaka (z dušilcem šuma) Pozicioniranje C-osi v korakih po 0,0001° Revolver z 12 postajami Krmiljenje Y-osi Itjdpex D R Svsfx Af Tjb Vmesnik za podajalnik palic Stroj Mazak QTE-200MY SG s 3 osmi je bil izdelan leta 2023. Ima maksimalni premer obhoda 695 mm, standardni premer obdelave 235 mm in maksimalni premer struženja 340 mm. Glavno vreteno dosega do 5.000 min-1, moč motorja znaša 15,0 kW. Opremljen je z revolverjem z 12 postajami, hitrosti hitrih pomikov po oseh X, Y, Z in C so 30, 10 in 30 m/min. Za več informacij o stroju nas kontaktirajte. Vrsta uporabe Struženje

Leto izdelave: 2024, Stanje: novo, Nosilnost 300 kg Itodpfexcywrex Af Teb Dimenzije 1200 x 900 x 1300 mm Lastna teža 125 kg Za natikanje na vilice viličarja. Pritrditev z varnostnim zatičem, Rebrasto pločevinasto dno, vhodna vrata, Varnostna mreža, košara za orodje, Vhodne odprtine 190 x 100 mm, prašno lakirano. Dovoljeno za največ 2 osebi, potrjeno pri Dekra. Višina košare 1050 mm Širina košare 1100 mm Globina košare 700 mm

Stanje: novo, Leto izdelave: 2025, The CORMAK PS-650 positioner is a versatile auxiliary device used in a variety of production tasks. Its wide range of capabilities makes it suitable wherever components need to be handled or manipulated. It is highly valued in the welding, painting, and mechanical industries for its quality and rotational functionality. CORMAK positioners offer an ideal solution wherever components or assemblies must be rotated, wound, or coiled. Main features, functions, and advantages of the welding positioner: Functions: 1. Rotation direction switch: Allows control over the direction of table rotation. 2. Changeover rotation switch: Enables reversing the direction of rotation. 3. Stepless speed adjustment: The turntable speed can be precisely set to match specific tasks. 4. Compact, robust design: Provides durability and longevity for demanding operations. 5. Foot pedal control: Ensures convenient operation and control. 6. Thermal safety fuse: Supplies extra safety during operation. 7. Brush motor: The DC brush motor is efficient in a variety of industrial applications. Ijdpfx Afjuc Tdqj Tjtb 8. Table tilt range 0 - 90°: The disc can be tilted from 0 to 90 degrees, essential for welding in multiple positions. 9. Capability to mount a centering chuck: Allows for precise centering of workpieces. Advantages: 1. Increased productivity: Enhances efficiency in assembly and welding processes. 2. Reduced production costs: Automating or easing component rotation can contribute to lower production expenses. 3. Reproducibility: Assists in maintaining consistency and quality of welded joints. 4. Operational flexibility: Speed and direction control allow adaptation to diverse tasks. 5. Improved welder ergonomics: Offers more comfortable and accessible working positions. Machine specifications: - Rotation direction and main switches - Equipped with limit switches - High torque output - Durable brass sleeve ensures 100% load transfer to the workpiece - Smooth variable table speed control - Compact, robust construction - Foot pedal operation - Wired remote control included - Thermal fuse protection - Stable speed regulation - Table tilt range: 0 - 90° - Option to mount self-centering chuck Technical data: Power supply: 400 V Motor power: 300 W Horizontal load capacity: 400 kg Vertical load capacity: 200 kg Table diameter: 650 mm Workpiece diameter: 693 mm Table tilt range: 0° ~ +90° Rotation speed adjustment range: 0.2–1.8 rpm Speed adjustment: stepless Total length: 850 mm Total width: 700 mm Total height: 680 mm Weight: 122 kg The CORMAK PS-650 positioner is a valuable tool for any industry requiring the rotation and positioning of components, especially during welding processes. It helps enhance productivity, reduce costs, and improve work quality. *Three-jaw chuck not included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, obratovalne ure: 148.086 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 35.000 m/min, hitri pomik na osi Z: 35.000 m/min, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 6.500 kg, dovod hladilne tekočine: 20 letvica, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Spindle specifications Spindle taper: HSK A 63 (12,000 rpm) Tool changer: 30 positions Feeds and speeds Feed rate range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min Itjdpsxz A Nnjfx Af Tjb MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program run time: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net plus VAT.