Kolesni nakladalnik

Komatsu WA500-3

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Powder spray booth and spray area The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Njdpfowf Dpgjx Aqqowh Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Stanje: rabljeno, Leto izdelave: 2007, Aichi rm04b Leto izdelave: 2007 / 2009 / 2010 / 2011 Nwsdsxcgatepfx Aqqsh Teža: 630 kg Dimenzije (D x Š x V): 78 x 130 Prehaja skozi vrata Opremljen s CE certifikatom in vgrajenim polnilnikom Takoj pripravljen za uporabo in izjemno zmogljiv

Stanje: novo, Leto izdelave: 2024, The Durma Tube Laser HD-TC 60220 stands for maximum precision and efficiency in tube material processing. With its impressive maximum tube diameter of Ø220 mm and the ability to cut both square profiles up to 160 x 160 mm and rectangular profiles up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the capability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects requiring rapid production while maintaining consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing time. Max. tube diameter: Ø220 mm Laser power: 3 kW Max. dimensions of square profile: 160 x 160 mm Max. dimensions of rectangular profile: 200 x 100 mm Njdpfx Aeq Tpkyjqqowh Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Open profile types: L, U

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: vlakenski laser, laserska moč: 12.000 W, najv. debelina pločevine: 30 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Поддерживает резку стальных труб длиной до 12 м Оснащён полностью автоматизированной системой комплексной подачи и выгрузки Интеллектуальное решение «одна станция» для загрузки, резки и выгрузки, повышение производительности до 200% Поддержка множества технологических операций: фасонная резка (скош), замковка, резка, пробивка отверстий, формирование сварочных отверстий, вырезание отверстий под болты, маркировка и нанесение меток Лазерная мощность 12 000–20 000 Вт Перемещение по оси X 1 600 мм Перемещение по оси Y 1 900 мм Перемещение по оси Z 900 мм Поворот по оси A ±90° Поворот по оси C ±90° Перемещение по оси U 30 мм Nwsdpjw A H T Asfx Aqqsh Перемещение по оси V 13 000 мм Точность позиционирования ±0,1 мм Максимальный размер обрабатываемого профиля 1 000 × 400 мм Максимально поддерживаемый вес 5 т Поддерживаемые профили двутавр, швеллер, балка I-типа

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, stanje pnevmatik: 90 odstotek, stanje pogona: 90 odstotek, število sedežev: 1, številka stroja/vozila: KM&EW144, Oprema: hidravlika, kabina, Opis proizvoda Nsdeum Eiuspfx Aqqswh Rabljena oprema za hvatanje trupaca Proizvođač: Caterpillar Model: CAT 966C Rad na dizelski motor Stroj se prodaje u viđenom stanju Za više informacija, molimo kontaktirajte: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Lamina FA Blackline 1620BL je visoko natančen, visokohitrostni, popolnoma avtomatski stroj za laminiranje/montažo list-na-list. Stroj lahko obdeluje večino materialov, ki so na voljo na trgu. Modularna zasnova omogoča enostavno nadgradnjo in vzdrževanje, kar zagotavlja dolgo življenjsko dobo stroja. Največja velikost lista: širina: 1600 mm dolžina: 2000 mm Najmanjša velikost lista: širina: 350 mm dolžina: 350 mm Kapaciteta podajalnika: Zgornji podajalnik: 500 mm (20”) Spodnji podajalnik: 800 mm (32”) Zgornji list: 130 do 450 g/m2 1 pts = 28,25 g/m2 Spodnji list: Od 250 g/m2 do 10 mm (0,39”) 1 pts = 28,25 g/m2 valovita lepenka od 0,6 - 10 mm (0,016” - 0,39”) Zahteve za zrak: 6 bar; 80 psi; 34 CFM, približno 500 L/min Dodatno se lahko opremi z opcijskim strojem za laminacijo PB 1600 Pressure Belt. Nwedpfxsw Hrrre Aqqoh

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Wagner praškarnica na prodaju! Oprema za praškasto lakiranje, godina proizvodnje 2010, sastoji se od: Kabina: Prima Cube 16000 Dovod praha: Powder Center Povrat praha: Cyclon Filter 16000 Generator gibanja: KHG 350 Konfiguracije proizvodnog procesa UKLJUČUJU: I. Pretpriprema Maksimalna dimenzija komada: DxŠxV=2600x400x1850 mm II. Oprema Tehnološki transportni sustav automatske brzine V=1,2 m/min Podešavanje brzine između 0,5-2,5 m/min 1. Stanica za predobradu MNA-3-LPG, ukupna duljina 16,7 m Ulazna duljina L=2,5 m a. Pranje, odmašćivanje i fosfatizacija; L=3,6 m - broj raspršivačkih rama – 10 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 180 - kapacitet pumpe – 162 m3/h - snaga pumpe – 15 kW - spremnik 4 m3 za aktivnu tekućinu - unutarnji izmjenjivač topline s LPG plamenikom – 160 kW - temperatura 50°C - mehanički separator ulja - filter otopine - dozatorna membranska pumpa s regulatorom - vrijeme pranja – 3 min b. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek c. Prvo ispiranje; L=1,2 m - broj raspršivačkih rama – 4 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 64 - kapacitet pumpe – 38 m3/h - snaga pumpe – 3 kW - spremnik 1,5 m3 za vodu - vrijeme ispiranja – 1 min c. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek d. Fino ispiranje; L=1,28 m - broj raspršivačkih rama – 3 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 54 - kapacitet pumpe – 33 m3/h - spremnik 1,5 m3 za vodu - snaga pumpe – 3 kW - dodatni raspršivački ram - broj mlaznica po ramu – 18 - vrijeme finog ispiranja – 1 min e. Zona kapanja L=2 m - vrijeme kapanja – 1 min 40 sek Tri priključka za ventilaciju s tri ventilatora Radni prostor izrađen od inoxa. Cijevi od PVC-a ili inoxa. 1 kom 2. Automatska sušara nakon vodenog tretmana AST-1-KLPG: - Dimenzije radnog prostora DxŠxV=7000x3000x2800 - Zračne zavjese na svakoj strani za sprječavanje gubitka topline - Indirektni izmjenjivač topline, pogonjen UNP-om, snaga 200 kW - Tri ventilatora, kapacitet 6000 m3/h svaki - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm debljine - Vrijeme sušenja 10 min 1 kom 3. Automatska peć za polimerizaciju praha APT-2-KLPG - Dimenzije radnog prostora DxŠxV=10200x3600x2800 - Zračne zavjese s jedne strane za sprječavanje gubitka topline Nodoww Adtspfx Aqqjwh - Dva indirektna izmjenjivača topline na UNP, svaki 300 kW - Osam cirkulacijskih ventilatora, svaki kapaciteta 6000 m3/h - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm - Vrijeme polimerizacije 25 min 1 kom 4. Nadglavni transportni sustav ATR-ADAX za lakirnicu, uključuje: • ravna staza s vješalicama L=400 mm: 146 m • pogonska stanica – 2 kom • stanica za zatezanje – 1 kom • stanica za podmazivanje lanca – 1 kom • nacrt potporne strukture – 1 set

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 136.029 km, vrsta goriva: dizel, barva: rdeča, dvižna višina: 37.400 mm, tip droga: teleskopski, Leto izdelave: 2016, obratovalne ure: 7.578 h, = Weitere Optionen und Zubehör = - PTO = Weitere Informationen = Allgemeine Informationen Baujahr: 2016 Verwendungszweck: Bauwesen Technische Informationen Zylinderzahl: 6 Antrieb: Rad Nwedjuxu Dtepfx Aqqjh Funktionell Mast: Teleskop (4 Teilen) Mastlänge: 37,4 m Hubkapazität: 40.000 kg Marke des Aufbaus: TEREX AC40 CE-Kennzeichnung: ja Zustand Technischer Zustand: sehr gut Optischer Zustand: sehr gut TEREX AC40 KRAN ANTRIEB 4X4X4 KONTERGEWICHT 5.5 TON. UNTER WAGEN 136029 KM KLIMAANLAGE AUTOMAT GETRIEBE REIFEN 60% GUT GRÖSSE 445/95/R25 ADBLUE ZENTRALES SCHMIERANLAGE OBEN WAGEN HEIZUNG 1 RASIER-HOLZBLOCK 15 T. 1X WINDE MAX HUBKAPAZITAT: 40.000 KG. MIN / MAX AUSLEGERLÄNGE 9.5 M / 37.4 M MAX ARBEITS HOHE 37.4 METER CE-ZERTIFIKAT FOLGEN SIE UNSEREM INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH WIR SPRECHEN ENGLISH HABLAMOS ESPANOL

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 10 mm Cutting angle: 2° Hold-downs: 14 pcs Strokes: 13 strokes/min Throat depth: 350 mm Oil capacity: 260 l Control system: CYBELEC CybTouch 8 Total power requirement: 22 kW Machine weight approx.: 10,550 kg Space requirement approx.: 4000x2250x2050 mm Features: - Hydraulic swing-beam metal guillotine shear - Touchscreen controller with digital display for the backgauge - Automatic blade gap adjustment via control system - Backgauge control, 1000 mm travel, with ball screw spindles - Swing-beam machine with blade gap adjustment - 2 support arms - 1 side gauge - Light barrier at the rear of the machine - Cutting length restriction - Cutting line illumination - Chrome steel blades - Ball rollers in the table - Hinged finger guard with limit switch - Foot pedal - CE mark / Declaration of Conformity Nwodpfx Ajk Tzztsqqjh - Operating manual in German

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Njdpfx Aoi Hn Sreqqjwh Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)