Ravnalnik

Kohler PP 50P.1600

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts Giedpfx Ajd Ev Upogwsp NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, MSF Pro 4001.20LB MicroStep CNC Cutting System of the MSF Pro series featuring: Gedsvw Tdlepfx Agwsip • 2D laser cutting head with IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW Technical Data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm as per VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm as per VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool changer: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removal of drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine has always been operated with maintenance and support contract

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Giodpfxswuurws Agwsp Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Godpjvzhf Sofx Agwsip Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Gjdpferfw Nhjx Agwsip Tool changer: 20 magazine positions Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, For sale due to closure of a craft bakery: a WP roll production line, year of manufacture 1995. Installed upstream is a WP Multimatic, a proofing cabinet (retarder/proofer), and a WP stamping station. Giedpfx Ajuqw Drogwop Please note: The dismantling of the equipment must be carried out by the buyer.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Gsdpfxshigmbo Agwsip Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, 🚨 NA PRODAJU: 2x Stroja Kardex XP500 – Odličan Stanje! 🚨 Na prodaju zbog uklanjanja. Gradimo novo skladište i ovi uređaji nam više nisu potrebni. U dobrom stanju, nedavno servisirani, redovito održavani za cijelo vrijeme našeg vlasništva. Cijena je po komadu, moguća je korekcija. Police se mogu jednostavno prilagoditi za različite vrste i veličine proizvoda. Pregrade se mogu prodati zajedno s uređajima ako je potrebno. Strojevi su trenutno podešeni za dvostruku prezentaciju ladica. Uključeno je i Kardex SortBench s 10 odjeljaka. Detalji: Model: Kardex XP500 Dostupna količina: 2 komada Stanje: Redovito održavani, potpuno funkcionalni Giodpfovuvbzjx Agwop Glavne značajke: - Visok kapacitet skladištenja za maksimalno iskorištenje prostora - Brzi i pouzdani sustav izdvajanja za veću produktivnost - Konstruirani za zahtjevnu industrijsku primjenu - Ergonomski dizajn za poboljšanje sigurnosti na radu - Energetski učinkovito poslovanje Zašto odabrati Kardex XP500? Ovi uređaji su idealni za poduzeća koja žele povećati učinkovitost, uštedjeti prostor te poboljšati točnost u odabiru narudžbi. Lokacija: Uređaji se trenutno nalaze u Wanganuiu, Novi Zeland.

Leto izdelave: 1980, stanje: rabljeno, Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Total power requirement: 10 kW Machine weight approx.: 7.5 t Space requirement approx.: m Table size approx.: 2,000 x 1,800 mm Maximum table load approx.: 12,500 kg Longitudinal table travel: 1,250 mm Table height above floor: 920 mm Longitudinal feed: 0.63 - 2,000 mm/min Rotary feed (relative to 1000 mm Ø): 1 - 3,150 mm/min Rapid traverse, longitudinal: 2,000 mm/min Rapid traverse, rotary (relative to 1000 mm Ø): 3,150 mm/min Machine weight: 7,500 kg External dimensions (L x W x H): 3,700 x 2,100 x 920 mm Total drive power: 10 kW – 380 V – 50 Hz Accessories / Special features: - Steel telescopic covers for the guideways - Infinitely adjustable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and angle reading device Condition: Satisfactory to good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Giedpfx Aot Hwq Rjgwsp We kindly ask you to review our offer. Please always inquire about your needs for good used machines with us.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Giodsd Ixadspfx Agwsp Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000