Konvencionalni stružnica - Sinus 330/2000 D

Knuth Sinus 330/2000 D

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Predpfsv A Sqhjx Agpjd Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Leto izdelave: 2021, Stanje: generalkompletno obnovljen (rabljeno), Diaform device, fully overhauled, for JUNG HF50 / JF520 Pjdpfx Agohcn R Isperd

Stanje: novo, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Transversal travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout by SINO * Automatic longitudinal table feed * Drill chuck with ISO30 - B16 shank * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp Prsdpega Tyzjfx Agped * Coolant system * Tapping function * Digital depth stop * Milling head motorized height adjustment * Various tools in case

Stanje: novo, Bernardo Lead and Feed Screw Lathe Master 180 incl. 3-axis digital display Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Podpfod Du Tiex Agperd Swing diameter over gap*: 480 mm Swing diameter over cross slide: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mount: DIN 55029, D1-5 Speed range: (8 steps) 70 - 2000 rpm Longitudinal feed range: (32) 0.052 - 1.392 mm/rev Cross feed range: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Imperial threads: (34) 4 - 56 TPI Tailstock quill diameter: 42 mm Tailstock quill travel: 110 mm Tailstock taper: MT 4 Motor output S1 100%: 1.5 kW (400 V) Motor rating S6 40%: 2.2 kW (400 V) Machine dimensions (L x W x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed section: 225 mm Scope of delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, acc. to DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Follow rest – max. passage diameter 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • 4-way tool post • Protective device for 4-way tool post • Safety clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centres • Foot pedal with brake function in accordance with CE • Motor with magnetic brake according to CE standard • Machine base

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on counterface) of the cross and top slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and slide splash protection Chuck guard Pjdpocir Ansfx Agpjrd Control bar with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: pripravljen za uporabo (rabljen), izvrtina vretena: 84 mm, Echea lathe model AII with 5000mm between centers, swing over bed 750mm, swing over gap 1050mm, swing over carriage 500mm, spindle bore diameter 84mm, spindle speeds from 8 to 850 rpm, equipped with a 400mm universal 3-jaw self-centering chuck and a 600mm independent jaw chuck, supplied with both fixed and traveling steadies. The lathe is fitted with safety guards and is generally in good condition. Prjdou I Rl Eepfx Agpod

Stanje: dober (rabljeno), Litoželezni podstavek – talna plošča Uporabna površina (D x Š x V): 3600 x 1200 x 300 mm 4 T-utorji: širina 44 x 26 mm Opremljena z nivelirnimi nogami Teža: pribl. 3 t Prjdpfx Ajh Auahegpsd

Stanje: novo, MAXION UNIMAX 1 Variable-Speed Bench Drill Press Description: Precision, smooth-running bench drill press featuring high accuracy and quality. Equipped with a switch for clockwise/counterclockwise rotation, the drill table is adjustable via rack and pinion and can be swiveled around the column. Pedpfxscgbx Ho Agpord Technical Data: Continuous drilling capacity in E 335: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 Spindle taper: MK 2 Drilling depth: 80 mm Throat (distance spindle to column): 180 mm Spindle-to-table distance: up to 380 mm Table surface: 250 x 220 mm T-slot width: 10 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Frequency-controlled motor: 1.1 kW Power supply: 230 V / 50 Hz Infinitely variable spindle speed: 200 – 4,000 rpm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Technical specifications: Year of manufacture: 2001, serviced in 2024 Working length: 3,100 mm Distance between uprights: 2,650 mm Pressing force: 300 t CNC control: Robosoft BC55 Touch-Graphic 2D Controlled axes: Y1 / Y2; X CNC crowning table Throat depth: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (L x W x H): approx. 4,200 x 2,200 x 3,700 mm Weight: approx. 19 tonnes Accessories: Prodjvy H Iiopfx Agped Various tools The seller assumes no liability for typographical or data transmission errors. The machine's visual condition, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Pjdpfx Agert Ip Njpsrd Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.