Horizontalni rezalni stroj

Klopp DP AP

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Codpjwbi Awofx Afqoaa Machine color: Green Indexing head color: Red --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Cedpfx Asgvkkzefqoaa Total connected load: 22 kVA

Stanje: rabljeno, Leto izdelave: 1973, številka stroja/vozila: 20591, Roller diameter: 500 mm Throat depth: 1050 mm Workpiece height: 400 mm Voltage: 400 V Table size: 750 x 800 mm Total power requirement: 5.5 kW Cajdpfx Aocxxr Eefqja Machine weight approx.: 1.5 t Space requirement approx.: 2.4 x 1.0 x 2.2 m Bandsaw in heavy-duty cast-iron construction, equipped with a stepless variator gearbox and 4 preselectable gear stages. Cutting speed adjustable: Stage 1: 15–79 m/min, Stage 2: 67–305 m/min, Stage 3: 207–940 m/min, Stage 4: 2350 m/min! Band tensioning device, worktable tiltable +/- 40°, rear auxiliary table, various bandsaw blade guides, blade grinding device, work light, foot switch, accessories.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an excellent price-performance ratio thanks to its standard quill feed. The dovetail guide on the gear head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed: (12) 50 - 2520 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed: (3) 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle / table: 40 - 485 mm Travel (x / y): 550 / 190 mm Vertical adjustment of milling head: 400 mm Casdpfxjvutw Hs Afqsa T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Approx. weight: 285 kg Standard features include automatic quill feed and thread cutting device Large speed range 50 - 2520 rpm (12 steps) Dovetail guideways for x, y, and z axes, adjustable via gib strips Versatile applications: slot milling, face milling, boring, etc. Heavy-duty, large cross table, precision-ground surface Milling: quill feed via handwheel Drilling: quill feed via handwheel High-quality aluminum motor, designed for continuous operation Sturdy and vibration-free cast iron construction Quick and easy speed changes using shift lever Tilting milling head for angle drilling, bevel milling, etc. Location: Ex-stock 54634 Bitburg - Available at short notice -

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Cjdpsqwgzqsfx Afqsaa Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, Stroj za uravnoteženje kardanskih gredi BVI-03-74 Na voljo na zalogi na Poljskem!!! Dobavni rok: en dan!!! Stroj za uravnoteženje gredi do mase 150 kg in dolžine do 4700 mm. Primeren za manjše delavnice s širokim spektrom kardanskih gredi, vključno z gospodarskimi vozili. Ta uravnoteževalni stroj je zasnovan za visoko produktivnost in služi uravnoteženju kardanskih gredi osebnih in tovornih vozil. Zagotavlja enostavno uravnoteženje kardanske gredi zaradi številnih tehničnih rešitev, hkrati pa ima dostopno ceno, kar zmanjšuje vaše finančno breme in omogoča učinkovito rast vašega podjetja. DVA KRAT hitrejši od vaše trenutne opreme. Ta uravnoteževalni stroj omogoča kakovostno in hitro uravnoteženje gredi. Če lahko delate 2–2,5-krat hitreje, je to vaša prava konkurenčna prednost. VISOKO UČINKOVITI PRIBOR Stroj je opremljen s tremi glavnimi tipi adapterjev: 1. Hitro-vpenjalni univerzalni adapterji. Dve glavni prednosti: Zaradi posebne zasnove je prirobnica kardanske gredi vpeta v 5 sekundah – brez vijačenja. To pomeni, da lahko gred vpetje izvedete 4-krat hitreje. Druga prednost so centrirni obroči. Gred se namesti v adapterje s centrirnimi obroči, ki jih je mogoče izdelati na navadnem stružnem stroju za najpogostejše velikosti. 2. KV-prirobnični adapterji. Uporabljajo se za uravnoteženje gredi s križno-zobimi prirobnicami, na štiri dimenzije: 120, 150, 180, 205 mm. Običajno za tovorna vozila. 3. Adapter z režami. Za montažo različnih prirobnic z izvrtinami; pritrditev gredi kot pri univerzalnih adapterjih, s centrirnimi obroči. KLJUČNE LASTNOSTI • Uravnoteženje 2-, 3- in 4-nosilnih kardanskih gredi • Dolžina do 4700 mm, masa do 150 kg • Montaža kardana v 1 minuti • Standardni set adapterjev – za 80 % vseh kardanskih gredi • Trije načini pritrditve sredinskega ležaja • Stroj s prožnim ležiščem – visoka občutljivost na vibracije • Upravljanje z enim delavcem • Drsna ležišča – hitra menjava, udobno delo • Varnostni nosilec s hitro vpenjalno sponko • Merjenje v vseh ravninah hkrati • Umerjanje stroja s strani upravljavca • Prikaz neravnotežja v realnem času • Izdelava in tiskanje poročil TEHNIČNE SPECIFIKACIJE Največja masa kardanske gredi: 150 kg Največji premer prirobnice: 300 mm Največja dolžina kardanske gredi: 4700 mm Število nosilcev stroja: 4 Število hkrati merjenih ravnin: 2, 3, 4 Minimalno dosegljiva preostala specifična neuravnoteženost: 10 g mm/kg Cajdepbv Tfjpfx Afqoa Obratovalno območje hitrosti rotorja: 1000–2000 vrt/min Napajanje: 380V, 3-fazno, 50 Hz Minimalna moč: 2,2 kW Dimenzije (d/š/v): 6000 х 1100 х 1450 mm Teža: 700 kg Izdelujemo celoten nabor opreme za uravnoteženje in servis kardanskih gredi. Za najboljšo ponudbo nas kontaktirajte!

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2,480 mm Maximum cutting width: 245 x 150 mm Csdonlbmzspfx Afqsaa Voltage: 230 V Drive power: 1.5 kW Saw band dimensions: 2,480 x 27 x 0.9 mm Mitre cuts: 0 – 60° Cutting speed: 20 – 90 m/min Machine weight: approx. 185 kg Space requirement: approx. 1.4 x 0.69 x 1.7 m NEW MACHINE PRICE: €2,459.00 + VAT - Infinitely variable speed control - Infinitely variable feed rate - Mitre cutting function - Bi-metal saw band - Material stop - Machine base - Coolant system

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed Caodpfxehhm Ede Afqja - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: kot nova (razstavni stroj), A demonstration metal band saw with base frame, quick-release device, and coolant system. Cjdpspgmkyjfx Afqjaa Cutting capacity Round/Rectangular/Flat 90°: 220/220x220/250x155 mm Round/Rectangular/Flat 45°: 160/160x160/160x100 mm Round/Rectangular/Flat 30°: 100/100x100/100x85 mm Cutting speed: 32/66 m/min For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted.

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Caodpfx Asd Hl Stsfqea Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm