Hidravlični stroji za valjanje pločevine s 4 valji

KK-Industries CY4R-HHS 300-20/20

Stanje: novo, Leto izdelave: 2025, TFON sistem zaobljevanja robov in obdelave površin Sistem zasnovan za izjemno prilagodljivost in natančnost omogoča obdelavo konstrukcijskega jekla, aluminija in nerjavnega jekla v debelinah od 0 do 120 mm. Napredna rešitev zaobljevanja robov in čiščenja površin je razvita za najzahtevnejše industrijske namene. Združljivost materialov: • Konstrukcijsko jeklo, aluminij, nerjavno jeklo Obseg debelin obdelave: • 0 – 120 mm Zaobljenje robov: Djdpfsi E Tkaex Afljul • R2 zaobljenje robov zagotavlja gladke, varne robove, kar dviguje tako estetiko kot funkcionalnost. Natančen nadzor: • Vgrajen Siemens avtomatizacijski sistem omogoča zanesljiv in dosledno natančen nadzor skozi celoten proces. Neodvisne obdelovalne postaje: • Več postaj omogoča vzporedno ali zaporedno obdelavo za prilagodljive proizvodne procese. Izbira velikosti miz: • Na voljo s širino delovne mize 650 mm, 1000 mm ali 1300 mm za raznolike proizvodne potrebe. Vrste miz: • Magnetna, vakuumska ali kombinirana magnetno-vakuumska miza za varno in prilagodljivo vpenjanje različnih materialov in formatov obdelovancev. Plazemska & kisikova tehnologija: • Napredni plazemski in kisikovi sistemi učinkovito odstranijo grobe robove in žlindro po rezanju ter zagotavljajo čiste površine. Čiščenje površin: • Učinkovito odstrani umazanijo, rjo, okside in lusko ter pripravi obdelovance na nadaljnje postopke, kot sta varjenje ali površinska zaščita. Zaobljeni robovi za zaščitne premaze: • Doseženi so enakomerni, napak prosti robovi, optimalni za barvanje in druge premaze. Industrijska uporaba: • Jeklarska servisna središča, energetika, rudarstvo, gradbeništvo, avtomobilska industrija – zasnovano za težka in visoko zahtevna okolja. Enotni rezultati zaobljenja: • 8 lamelnih brusnih kolutov zagotavlja dosledno R2 zaobljene robove na vseh delih. Pnevmatski nihajni sistem: • Podaljšuje življenjsko dobo brusnega traku in ohranja stalno kakovost skozi pnevmatsko nihanje. Oblikovano za industrijsko natančnost. Zgrajeno za vzdržljivost. Prilagodljivo za široko področje uporabe. TFON – odličnost pri zaobljenju robov in pripravi površin.

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions Dusdped Auacofx Aflel • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Secador de tambor usado fabricado por SAFEM, extraído de una línea de productos sin gluten. Fluido: Vapor Dujdpfjq Nmuwjx Aflol Presión de diseño: 12 bar Presión máxima de trabajo: 9,5 bar Presión de prueba: 24 bar Temperatura máxima de funcionamiento: 192ºC Volumen: 4,55 m³ Presión x Volumen: 54,6 bar x m³

Stanje: novo, Leto izdelave: 2024, dolžina valja: 3.000 mm, najv. debelina pločevine: 90 mm, najv. debelina jeklene pločevine: 90 mm, maks. debelina aluminijaste pločevine: 90 mm,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, premer zgornjega valja: 200 mm, premer stranskega valja: 150 mm, najv. debelina pločevine: 6 mm, delovna dolžina: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roll diameter 200 mm Dedpfx Afeuzm Aysloul Side roll diameter 150 mm Hydraulic drop-end

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Dodpfxst Hw She Afloul Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate weight: 2,400 kg Total power requirement: 4 kW Pre-bending: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roller diameter: 170 mm Equipment Dedpfx Aed Ab Hasfljul • 3 rollers • Asymmetrical roller arrangement – with pre-bending • Swing-out top roller to the front • Motorized right-left control • Conical rolling by tilting the rear roller • Operation via foot pedal • Hardened rollers • Digital display See catalog at the following link:

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 804, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, skupna masa: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic adjustment of the rolls Duodpfx Afovxbm Rjlol Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair frame around the machine can be purchased.

Stanje: novo, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 9.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 10.0 mm » at 3x top roll diameter Pre-bending: 8.0 mm » at 1.5x top roll diameter Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive for top and bottom roll via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion bar • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Important points for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be max. 30% or more than 60% of the roll length Duedpfx Ajd Ab H Eoflol • Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to a second machine Dedpfx Aowykccefljul