Delavniške stiskalnice

KK Kletzer Werkstattpresse 250 to

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Bsdpsn Tntqsfx Agtswl

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Bjdpfepgmufsx Agtswl Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: novo, Belt width: 100 mm Belt length: 915 mm Grinding wheel dimensions: 200 mm Work table: 170x125 / 265x150 mm Total power requirement: 0.5 kW Machine weight: approx. 26 kg Bjdpfx Ageupxqwstewl Space requirement: approx. 0.6 x 0.5 x 0.3 m

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Welding turntable Protec KT 1200 kg Motorized, infinitely variable tilt and speed control Motor 0.75 kW with remote control Foot switch Table diameter 1200 mm Height 1000 mm Length 1400 mm Bedpfxecrmyfs Agtswl Width 1500 mm Speed range from 0.05 to 0.5 rpm

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), used T-slot angle plate Bwodpfx Agjgwxmxjtol Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots used, in good condition

Stanje: dober (rabljeno), številka stroja/vozila: 5336, Load capacity: 6000 kg Faceplate dimensions: 1500 x 1500 mm Tilting range: horizontal up to -145° Rotational speed: 0 - approx. 1 rpm Electrical connection: 400 V, approx. 5 kW Bwsdpfx Agegbt Sqstol Space requirements: 2800 x 2350 x 3250 mm Weight: 5000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, SRF Master Illustration on the left 2 m extraction arm Application area Low levels of fume/dust Occasional use Benefits Minimal repositioning of the extraction hood required Greater flexibility thanks to additional hose connection at the rear Features Safe operation with filter monitoring Extraction hood can rotate and swivel 360 degrees Push handle and cable holder Process 3-stage Filter type Disposable filter Filter surface approx. 12 m² Separation efficiency > 99% Filter material Fiberglass fleece Welding fume separation class W3 Additional filters Two pre-filters Basic data Extraction capacity max. 950 m³/h Diameter of extraction arm Ø 150 mm Bwsdpfxjdqzbre Agtsl Length of extraction arm 2 m Diameter of suction connection Ø 150 mm Power supply 230 V / 50Hz Motor power 1.1 kW Sound pressure level 72 dB(A) Dimensions (W x D x H) 705 x 655 x 900 mm Weight approx. 71 kg

Stanje: novo, Special deal for stock items! Only while supplies last! Price ex stock, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New Bjdpfx Asb Hhkgjgtowl Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port Ø: 100 mm Motor output S1 100%: 2.4 / 3.0 kW Motor input S6 40%: 3.0 / 4.0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg Factory-sealed new item.

Stanje: novo, Table diameter: 330 mm Table load capacity: 220 kg Swivel range: 135 degrees Tilting adjustment: manual/motorized manual Maximum rotation speed: 5 rpm, stepless Table load capacity (vertical): 100 kg Total power requirement: 0.125 kW Machine weight: approx. 48 kg Space requirements: approx. 640 x 440 x 630 mm Welding positioner with: - Foot pedal - Hand-operated tilting/swiveling - Stepless speed adjustment - 250 ampere welding current transmission Bwsdpfxsh D Svcs Agtol - Bore in faceplate: 30 mm diameter, 20 mm deep.

Stanje: novo, Thread diameter M10 - M33 mm Stepless speed adjustment 35/115 rpm Bwjdpfefg U Slox Agtjl Torque 320 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with a quick-action chuck and a stable, flexible working arm. The drilling arm can be mounted directly to the workbench using the mounting flange and is immediately ready for operation, ensuring quick changeover times. The tap can easily be brought to the desired tapping hole without the need to position the workpiece underneath the machine. This version features an adjustable angle, allowing the quick-action chuck to be tilted, making horizontal tapping possible as well. Pneumatic tapping machines for threads M3 - M12, angle adjustable. Includes 6 quick-change chucks with slip clutch. Options: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - Magnetic base.