CNC obdelovalni center

Kitamura MyCenter HX3000iG

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine Ppjdpfxew Ew T So Aczsl

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Podpfx Acjvvvw Eszjpl Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvo-vreteno stružno-rezkalni center Mazak. Hod X/Y/Z: 580mm/160mm/1545mm, os B: 225°, os C: 360°, razdalja med konicama: 1500mm, maks. premer struženja: 660mm, premer nad ležiščem: 660mm, hitrost glavnega vretena/protivretena: 5000obr/min, število orodij: 40+9, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: cca 5200mm/2550mm/2600mm, teža: cca 14000kg, ure vretena: 24679h. Vključuje visokotlačno hlajenje, SMW luneto, SMW vpenjalno glavo, integracijo lunete, Renishaw sondo, merilno sondo, CAD/CAM programsko opremo Topsolid 7.18, oljni separator, postprocesor in Inspection-Plus paket. Stroj je bil večinoma uporabljen za fino obdelavo. Dokumentacija je na voljo. Ogled na lokaciji mogoč. Ppjdpfjx Ih Dgox Aczel

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Psdpfxsx Eh Iqe Aczepl Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Podpfx Acjxn Amtszspl Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 470 mm, pomik po osi Z: 876 mm, moč vretenovega motorja: 30.000 W, največja hitrost vretena: 1.250 obr/min, hitro pomikanje X-os: 24.000 m/min, hitri pomik os Y: 24.000 m/min, premer struženja: 1.000 mm, skupna dolžina: 2.375 mm, skupna višina: 3.659 mm, skupna širina: 4.558 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 3.655 Nm, vhodna napetost: 400 V, skupna masa: 14.000 kg, Oprema: hladilna enota, CNC vertikalni stružnica MAZAK Mega Turn 900 TEHNIČNE ZNAČILNOSTI: CNC krmiljenje: MAZATROL SmoothG Maks. premer struženja: 920 [mm] Maks. premer obdelave: 1000 [mm] Hod X osi: 470 [mm] Hod Z osi: 876 [mm] Hitrost hitrega pomika X osi: 24000 [mm/min] Hitrost hitrega pomika Y osi: 24000 [mm/min] Vreteno – povezava: A2-15 Maks. hitrost vretena: 1250 [vrt/min] Moč vretena: 30 [kW] Ppsdpow T Tmpefx Aczol Navor vretena: 3655 [Nm] Min. razdalja od čela vretena do čela revolverja: 154 [mm] Maks. teža obdelovanca: 3000 [kg] Maks. razdalja od čela vretena do čela revolverja: 1030 [mm] Število orodnih postaj: 12 Čas indeksacije revolverja: 0,4 [s/pozicija] Kapaciteta rezervoarja za mazanje: 516 [l] Skupna potrebna moč: 58,9 [kVA] Napajalna napetost: 400 [V] Dimenzije: 2375 × 4558 × 3659 [mm] Teža: 14000 [kg] Dodatne informacije na zahtevo.

Stanje: rabljeno, Tool presetting device EZSET EZ400 Pjdpfx Ajuhb Stoczspl

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Psdpfx Acjqzkdmozopl

Stanje: rabljeno, Article: Clamping heads Brand: Various manufacturers For multi-spindle automatic lathes, used or new Ppedpfon H Nzujx Aczol Please contact us for further information and pictures via email (at) or *

Stanje: dober (rabljeno), Leto izdelave: 2010, Ref. No.: 10287 Manufacturer: DMG Model: DMC 210 FD Year of Manufacture: 2010 Controller Type: CNC Controller: Heidenhain Mill Plus Location: Halberstadt Country of Origin: Germany X Travel: 2,100 mm Y Travel: 2,100 mm Z Travel: 1,250 mm Machine Length: 11,000 mm Machine Width: 5,000 mm Machine Height: 3,500 mm Max. Workpiece Diameter: 2,500 mm Max. Workpiece Weight: 6,000 kg Max. Rotary Table Diameter: 1,850 mm Table Speed Range: 250 rpm Tool Holder: HSK-A100 Tool Magazine with: 183 pcs. Spindle Speed: 12,000 rpm Max. Drilling Spindle Torque: 288 Nm Max. Torque: 2,000 Nm Feed Rate X/Y/Z Axis: 30,000 mm/min Max. Workpiece Height: 1,460 mm Axes: 5 Ppsdsxxn Ukepfx Aczsl Additional Information: Turning and milling center incl. pallet changer system Gear-driven spindle with 1,800 Nm Coolant preparation system with belt filter, 710 x 50 mm 1 chip conveyor Knoll 600S2 2 Losma oil mist separators 1 steel platform (storage area for clamping devices), approx. 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoders, electrical components replaced - Geometry logs available The machine is still in production and under power. The machine can be inspected at any time by appointment.