Stroj za perlicanje

Kircheis AUE 1/S

Stanje: novo, Leto izdelave: 2026, - Capacity: 1.2 mm - Working width: 250 mm Kdedpfx Aegg Nrksl Nek - Supplied with 8 sets of rollers

Stanje: novo, Leto izdelave: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roller diameter: 110 mm Lower roller diameter: 110 mm Bending roller diameter: 110 mm Total power requirement: 1.1 kW Machine weight approx. 0.9 t Space requirement approx. 2.5 x 0.6 x 1.1 m New machine Kodpfx Ajvx Uvxel Nsdk Conical bending device, hardened and ground rollers, motorized bending roller, stationary control panel, digital display for right and left bending rollers, digital display for lower roller

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 9207102, Offer 12001 Technical Data: Ksdpfx Aloi Hpmte Nsdk - Material thickness: 1.25 mm - Max. throat depth: 180 mm - Roller center distance: 63 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Working speed approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Space requirement approx.: W 550 x H 1250 x D 1000 mm - Weight approx.: 120 kg - Includes: E-foot pedal

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking Kjdpformkfnox Al Nodk • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Debelina pločevine 0,8 mm Izsek 180 mm Kdedpoht R Hmsfx Al Nsk Teža stroja cca 22 kg Potrebni prostor cca 500 x 450 x 160 mm Ročni stroj je opremljen z: - 8 kompleti valjev

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable Kjdpfx Aehq T N Djl Nedk - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: rabljeno, Grinding wheel diameter 0 mm Kdsdpod Ig U Rofx Al Nsk Drive power 0 kW The following grinding spindles are in stock: 1 pc. Fortuna FAVS 100 R, 250.250, 12,000 rpm - €700 each 1 pc. SKF 1033293-1 (ex Höfler) - €1,200 each 1 pc. SKF 1033293-2 (ex Höfler) - €1,200 each 1 pc. SKF 1040329 (ex Höfler) - €1,700 each

Stanje: novo, Leto izdelave: 2025, Stable and robust design in modern execution The Prod-Masz beading machines are ideally suited for producing various bead types. Includes 4 pairs of beading and flanging rollers. Features precise shaft bearing. - Maximum beading sheet thickness: 1.2 mm - Adjustable bumper regulation Kodpfebn Ek Nox Al Nedk - Stable and robust construction in a modern design - Roller profiles can be customized within the machine price (on request) - Option to equip with a gear motor (at additional cost) We look forward to your inquiry! We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Sheet thickness: 1.20 mm steel Shaft length: 140 mm Roller diameter: 62.0 mm Throat depth: 100 mm Rolling speed: 16.0 + 32.0 rpm Motor power: 0.75 kW Weight: 135 kg Dimensions (L-W-H): 900 x 450 x 1350 mm Kdedpfx Aoxaaf Rsl Njk Exhibition machine - like NEW Has not yet been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included in delivery - Robust bead forming machine with motor-driven rollers - Lower shaft with adjustable stop - For cost-effective production of various bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse operation - Machine base included

Stanje: novo, Segmented finger brake (press brake) with segmented upper clamping beam PNEUMATIC CYLINDER!!! Max. bending capacity across the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Kdsdpfxega T Dlo Al Nek Max. opening width ----- 48 mm Finger widths ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm