Mlinček

FORTUNA / SKF div.

Stanje: dober (rabljeno), Leto izdelave: 1981, obratovalne ure: 16.769 h, Centre height 175 mm, centre distance 700 mm, swivelling angle of rotary table 10°, workpiece spindle head swivelling range 90°, speed range 30–675 rpm, Morse taper 5, grinding spindle head – grinding wheel diameter 400 mm, maximum width 50 mm, drive power 6.25 kW. Ljdpfstz T H Djx Acyehp

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), Coordinate Measuring Machine (CMM) ETALON Derby 454 Measuring range: 457 x 508 x 406 mm Dimensions (L x W x H): 895 x 885 x 1575 mm Weight: approx. 220 kg Renishaw TP8 probe head Ljdpfx Acjkvm Txsyehp Last calibration: 2020

Leto izdelave: 2021, Stanje: generalkompletno obnovljen (rabljeno), Diaform device, fully overhauled, for JUNG HF50 / JF520 Lhodpfshcn R Iox Acysp

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Makino EU 64 wire EDM machine X = 600 mm Y = 400 mm Z = 260 mm Max. workpiece dimensions (W x D x H): 940 x 650 x 260 mm Max. workpiece weight: 1,500 kg Lodpfsgwp Eqjx Acyehp Service required before commissioning!!! The current Makino service report can be provided upon request.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Ljdpedl Uzkofx Acyshp Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction Ledjv S Dp Ijpfx Acyohp 2-axis Heidenhain digital readout Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Lhjdpfx Acohhm Edoyep Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 1970, x-travel: 900 mm y-travel: 250 mm z-travel: 370 mm Table clamping surface: 1525 x 325 mm Total power requirement: 9.85 kW Machine weight approx.: 3.1 t Space requirement approx.: 2.0 x 2.5 x 1.7 m Lhodecxxqrspfx Acysp

Stanje: pripravljen za uporabo (rabljen), Wheel diameter – max. 150 mm Wheel width 1 – 200 mm Module – max. 4 Module – min. 1 CNC Control: Sinumerik 840 D Table diameter: 140 mm Axial adjustment – max. 200 mm Cutter mounting: ISO 40 Maximum cutter diameter: 130 mm Maximum cutter length: 220 mm Infinitely variable cutter speed: 300 – 1,200 rpm Maximum cutter traverse: 170 mm Milling head swivel range: +/– 45° Lhedpfovzhg Nex Acyjp Feed rate: 1 – 1,500 mm/min Rapid traverse rate: 3,000 m/min Maximum workpiece diameter (in magazine): 150 mm Total power requirement: 50 kW Machine weight: approx. 8.5 t Space requirement: approx. 4.7 x 3.6 x 2.6 m Used CNC Gear Hobbing Machine, manufacturer: Pfauter, year of manufacture: 1992, completely overhauled in 2013 by the specialist company SerWeMa, equipped with Siemens Sinumerik 840 D CNC and workpiece magazine. This is a used machine; therefore, sale is made under exclusion of any warranty.