Profilne jeklene škarje + luknjač

KINGSLAND 60 XA

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard Kodpfx Alskvnumj Nelr There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Kljdpfx Alsb U Hwpo Nsr Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, The machine has very few operating hours and has been in storage for many years. Performance: Hole diameter and thickness up to max.: approx. 28×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angle 100x100x10 mm Flat steel up to max.: 300x10 / 200x13 mm Kljdsupzf Rjpfx Al Ner (See also the specification plate in the attachment). Machine weight: approx. 750 kg Various dies are included with the machine.

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Kodpfxsb U Hwtj Al Nolr Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm Kjdeb U Hwmopfx Al Njlr T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: rabljeno, Leto izdelave: 2014, skupna dolžina: 1.500 mm, skupna širina: 1.150 mm, skupna višina: 2.400 mm, Teža: 3.600 kg - Leto izdelave: 2014 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 441 Kodpfx Alexapfte Nslr - Moč [kW]: 3,0 - Tlačna sila [ton]: 28 - Največja delovna širina [mm]: 1000 - Razdalja med stebri [mm]: 950 - Izpust [mm]: 220 - Globina zadnje omejitve [mm]: 415 - Transportne mere: 1500mm x 1150mm x 2400mm (d x š x v) - Transportna teža [kg]: 3600kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Naveden cena ne vključuje DDV DDV/Obdavčitev razlike: DDV je odbiten za podjetja Dostava in vračilo/opravilo je možno kadarkoli za vse iz industrijskega sektorja Lukas van Rossum

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Kodjb U Hwnjpfx Al Nolr Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Kedpfx Alstrhf As Nolr Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.400 mm, skupna širina: 17.000 mm, dolžina mize: 400 mm, širina mize: 400 mm, stiskalna sila: 25 t, nastavitev hoda: 17 mm, delovna širina: 200 mm, skupna masa: 2.500 kg, leto zadnje generalne obnove: 2023, moč: 0,003 kW (0,00 KM), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power output: 3 kW. Power supply: 230 / 400 V. Ksdpjq Ikhpjfx Al Nelr Air connection: 5.5 bar. Feed unit: Silicon SFS 200, left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with inspection window. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for shipment. Additional used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Kljdpfxepa Nzye Al Nor Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm EMBALAŽA IN MERE: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH