KEYENCE IM-6025

KEYENCE IM-6025

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: Duodpjwg Takefx Aplet X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, 1.0 pc. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Model: 1-Chamber Cleaning System Internal tank: 750 x 600 x 770 mm Year of manufacture: 2022 THE DEVICE HAS NEVER BEEN USED. Dedpfev Nztxjx Apljut

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Vrsta raster elektronskega mikroskopa Zeiss XB 350 Dujdpfx Asw Rdvvsplet Oprema in dodatki • brez FIB stebra • programska oprema SmartSEM in SmartFIB • GIS s Pt-prekurzorjem • integrirani plazemski čistilec • EDX Oxford Xplore 30 (vklj. vmesnik in programska oprema) • avtomatska 200 mm prehodna komora • električni prehod (2 x 15 kanalov) • obtokovni hladilnik • Quiet Mode vakuumski rezervoar • ... kot tudi miza, zaslon, upravljalne konzole (lastniška tipkovnica in joystick Zeiss) ter različni nosilci vzorcev Prva uporaba: avgust 2024 Lokacija: Mainz Razpoložljivost: po dogovoru takoj na voljo. Naprava je še vedno v uporabi in si jo lahko ogledate ter jo testirate. Naprava je brez napak ali poškodb in je v celoti funkcionalna. Dodatne informacije na zahtevo!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 2.850 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 450 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: SIEMENS, skupna višina: 2.985 mm, skupna masa: 5.000 kg, število mest v zalogovniku orodij: 30, teža orodja: 8.000 g, število osi: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It is equipped with a SIEMENS 828 D CNC control and offers a travel range of 800 mm on the X-axis, 450 mm on the Y-axis, and 510 mm on the Z-axis. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It features a 30-position tool magazine and additional equipment such as a chip conveyor and an electronic handwheel. Contact us for further information regarding this machine. Additional equipment Dsdpsx D E H Iefx Aplsut • Electronic handwheel • Chip conveyor • Oil scraper • Coolant spray gun • 2 x hydraulic vices • 25 x BT40 tool holders Machine advantages Technical advantages • Table dimensions: 1000 x 450 mm • Distance spindle nose – table surface: 150 – 775 mm • Max. tool diameter with adjacent pockets free: 125 mm • Max. tool diameter with all pockets filled: 80 mm Additional information Machine still under power Dimensions Machine depth: 2158 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Extreem snelle en nauwkeurige inspectie voor grootschalige productie Z-resolutie: 0,5 µm Z-bereik: tot 30 mm (1,2") Schuine camera’s Aantal megapixelcamera’s: 8 Orthogonale camera Resolutie: 10 µm Beeldveld: 50 mm x 50 mm (2" x 2") Inspectiesnelheid: tot 65 cm²/s Software: Gebruikersinterface: Viscom vVision/EasyPro SPC: Viscom SPC (statistische procescontrole), open interface (optioneel) Verificatiestation: Viscom vVerify/HARAN Remote diagnose: Viscom SRC (software remote control) (optioneel) Programmeerstation: Viscom PST34 (optioneel) Systeemcomputer Besturingssysteem: Windows® Processor: Intel® Core™ i7 PCB-handling PCB-afmetingen: 508 mm x 508 mm (20" x 20") Transsporthoogte: 850 - 950 mm ± 20 mm (33,5" - 37,4" ± 0,8") Breedte-instelling: automatisch Transporttype: Enkelsporig transport PCB-klemmen: pneumatisch Djdpswkfuujfx Apleut Boventransportvrijheid: 50 mm (2") Ondertransportvrijheid: 45 mm (1,8"), optioneel tot 85 mm (3,3"); 40 mm (1,6") met PCB-ondersteuning Overige systeemgegevens Positioneer-/handlingunit: Synchrone lineaire motoren Interfaces: SMEMA Stroomvoorziening: 400 V (andere spanningen op aanvraag), 3P/N/PE, 8 A, 4 - 6 bar werkdruk Systeemafmetingen: 994 mm x 1565 mm x 1349 mm (39,1" x 61,6" x 53,1") (B x H x D) Gewicht: 720 kg (1587 lbs)

Stanje: rabljeno, Leto izdelave: 2001, Dolžina mize 600 mm Širina mize 380 mm Krmiljenje FANUC 16i-M Vzdolžni pomik 500 mm Prečni pomik 300 mm Največji brusni premer 230 mm Koordinatni brusilni stroj | HAUSER - S35-400 Stroj je v dobro vzdrževanem stanju. Prosimo, upoštevajte, da so tehnični podatki dodani na podlagi primerljivih strojev. Video stroja na lokaciji tovarne vam z veseljem pošljemo na zahtevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 Djdpfx Ajwmwwyoplsut

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Krmiljenje Heidenhain TNC 620 Pomiki X/Y/Z: 350 x 250 x 300 mm Dodpfxsx Rpahj Apljut Vrtljaji vretena: 12.000 min-1 Rotacijska in nagibna miza Magazin orodij za 50 orodij, ISO 30 Transporter ostružkov LANG avtomatizacija

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list. Dusdpevldx Aefx Aplet

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), This KEYENCE IM-8020 optical measuring machine was manufactured in 2023. It features a comprehensive set of components, including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and probe inserts. Consider the opportunity to purchase this KEYENCE IM-8020 optical measuring machine. Contact us for more information. Additional Information • Measuring head with 200 × 200 mm measuring field • Multi-angle lighting with light barrier • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates Dsdpfsx D Dl Njx Aplout • Software • Clamping device • Glass scale • Barcode scanner • Lighting • Stylus Optional accessories: • Probe tip sets: 80 pieces, range 0.3–0.99 mm • Probe tip sets with handles: 350 pieces, range 0.4–4 mm • Dial gauge sets: 800 pieces, range 4–12 mm • Limit plug gauges: 265 pieces, range 1–43 mm • Setting rings: 50 pieces, range 0.6–47 mm • Thread plug gauges: 170 pieces, range M1–M24 and several imperial threads • Thread ring gauges: 265 pieces, range M1–M63 and several imperial threads • Micrometers: 70 pieces, range 0–150 mm (analog and digital) Optional: Extensive package of measuring instruments

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Duodpfx Apjx A Hdfelot