TRAČNA ŽAGA KESMAK KME 280

KESMAK KME 280

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dsdsifk Rbspfx Afqscr Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Stanje: novo, Leto izdelave: 2020, Električni stroj za izdelavo kolen je naprava za oblikovanje kolen iz okroglih in pravokotnih cevi različnih premerov. Stroj za izdelavo kolen EEM-200plus predstavlja izboljšano različico stroja EEM-200. Dodatno ima četrto spodnjo stiskalno orodje, kar omogoča stiskanje cevi z vseh štirih strani med upogibanjem in zagotavlja boljšo kakovost kolena. Dcodpfof Epznox Afqor Naš stroj lahko uporabljate tako za delo z okroglimi kot pravokotnimi cevmi. Stroj za izdelavo kolen EEM-200plus omogoča obdelavo cevi s premerom od 80 do 200 mm. Pozor: Notranji premer cevi, ki jo uporabljate za upogibanje, mora biti 1 mm večji od premera matrice stroja za upogibanje! Zaklep cevi mora biti zaprt ali zavaran, da se med upogibanjem ne odpre! Stroj za izdelavo kolen EEM-200 je električen in za delovanje ne potrebuje zračne ali oljne napeljave. Poraba električne energije znaša 1,5 kW/h. Potrebna napetost je 380 V. Uporaba stroja je možna v okoljih s temperaturo od -5 do +45 stopinj Celzija. Stroj za izdelavo kolen je primeren za upogibanje cevi z največjo debelino do 0,8 mm. Stroj EEM-200plus omogoča upogibanje kolen s pomočjo posebnih stiskalnih orodij. Za vsak premer cevi je potreben en komplet stiskalnega orodja. Če želite upogibati cevi različnih premerov, morate dokupiti dodatna stiskalna orodja. Ob nakupu stroja prejmete štiri komplete stiskalnih orodij, tako da lahko upogibate do štiri premera cevi v razponu od 80 do 200 mm (izbira premerov po vaši želji).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 - 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 - 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line Composition: Uncoiler End shear Welding table Edge trimming shear with scrap chopper Scrap conveyor Strip edge preparation Entry table Forming unit Inner/outer scraper Cooling section Sizing section Testing unit and length measurement Cutting to length Ejecting station for defective pipes Dedpfx Afjuc Shuoqocr Blow-out station Oiling station Bundling station Strapping station Bundle removal Electrics

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Hello, machine in very good condition. TM-SERVICE is a company specializing in the servicing and sale of poultry processing machinery. We install equipment worldwide and guarantee that all machines we sell are thoroughly inspected and prepared for reliable operation. Dodpfx Ajn Nykwofqjcr

Stanje: skoraj kot novo (rabljeno), Set, packed in wooden box, screw and cylinder barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Dcsdpfx Afsdm Aghsqsr

Stanje: rabljeno, Tool clamping surface: 0 mm Weight: 0 t Djdpfx Aed Ihcajfqscr Titanium-coated solid carbide slot drills available in the following diameters and various quantities: Ø 9.7 - 11.7 - 13.7 - 15.7 - 17.7 - 19.7 - 20.5 - 21 mm Cutters up to and including 15 mm: €15 each. From 15 mm upwards: €20 each!

Stanje: dober (rabljeno), Leto izdelave: 2000, najv. debelina jeklene pločevine: 2 mm, maks. debelina aluminijaste pločevine: 3 mm, Technical specifications: - Maximum working length: 2160 mm - Maximum sheet thickness (steel 400 N/mm²): 2.0 mm - Maximum sheet thickness (stainless steel): 1.5 mm - Maximum sheet thickness (aluminum): 3.0 mm - Maximum developed sheet width: 1500 mm - Maximum bending height on four sides: max. 203 mm - Bending blade operating range: 180 degrees - Machine width: approx. 5500 mm Dcedpfx Aoqzibtjfqsr - Machine length: approx. 7000 mm - Machine height: 2500 mm - Total weight: 21,000 kg - Power: 18 kW - Frequency: 50 Hz - Pressure: 6 bar INCLUDES drag-feed loading system

Leto izdelave: 2021, Stanje: novo, Directly available from stock Dodpfxjica Amj Afqocr List upon request 550 pieces = 1 truckload (15,000 kg theoretical weight / 13,900 kg actual weight)

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Dcsdsgbfaxopfx Afqer Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Stanje: dober (rabljeno), 10,000 Pieces of Insert Grating / Wire Mesh Decks for Pallet Racking, Galvanised Finish Insert gratings are available in various dimensions, mesh widths, bar specs, and load capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Insert Grating Mesh Size Load Bar Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm Dodpfxjd Hvvgj Afqscr 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used equipment in excellent condition, see photos. Item is in stock. Transportation available on request. Inspection possible by appointment at any time. Further information available on request. Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times. (Technical specifications, information, prices, and prior sale subject to change. Please see our General Terms and Conditions. All prices are exclusive of VAT, ex works.) Purchase/Sale We are always seeking and offering a wide variety of items from various categories: - broom-clean facility liquidations - business closures - Fast – flexible – efficient! We also clear and/or dispose of inventory for insolvency administrators. Please contact us with key details and we will respond promptly. To visit our website, please click on our logo!