Valjčna brusilka

KELLENBERGER URF 320

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Duedpfxevq R Uze Ah Sjp Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, A DMG Mori CNC vertical machining center including Lang pallet handling system is available. 1) DMG Mori, year of manufacture: 2014, travel ranges X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, spindle speed: 14,000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool stations: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28,250h, spindle hours: 13,116h. 2) Lang Eco Compact 20 pallet automation system, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable at the doors is defective. Documentation is available. On-site inspection is possible. Djdpfxewpk Ans Ah Soup

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece spindle headstock for cantilever grinding of heavy workpieces. The machine will undergo major maintenance/partial overhaul including a geometry inspection report according to the Kellenberger new machine guideline. Djdpfx Aov Dxxzoh Seup At present, the machine does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Leto izdelave: 2001, stanje: rabljeno, Tehnični podatki: Dusdpfx Ahjikbtne Sjp x-hod: 400 mm y-hod: 300 mm z-hod: 500 mm Vpenjalna površina mize: 400 x 300 mm Obremenitev mize: 50 kg Krmiljenje – polavtomatsko: LASERSOFT 3D Moč laserja: 100 W Skupna potreba po moči: 27 kVA Teža stroja pribl.: 2,5 t Potreben prostor pribl.: 3 x 3,5 x 2,8 m CNC gravirni/označevalni/konturni laserski stroj Pribl. 9.000 vklopnih ur, pribl. 5.500 delovnih ur

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Dsdpouyk N Ijfx Ah Ssup

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: Duodet Hw H Espfx Ah Ssp • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: potreben popravila (rabljeno), Maho MH 900 C without enclosure Control: CNC 432 (V9) - Working area X/Y/Z: 1000mm/500mm/650mm - Fixed angular table: 1150mm x 650mm - Maximum table load: 900 kg - Spindle taper: SK50 - Spindle speed: 40 - 1600 rpm - Feed rate: 5 - 2,000 mm/min - Rapid traverse: 6 m/min Duodpfx Aofgg Aajh Ssp - Space requirements: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Leto izdelave: 2014, stanje: zelo dobro (rabljeno),

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 100 mm, teža obdelovanca (maks.): 20 kg, dolžina brušenja: 400 mm, premer brusilnega koluta: 350 mm, razdalja med središči: 400 mm, leto zadnje generalne obnove: 2026, ZNAČILNOSTI: Razdalja med središči: 400 mm Višina centra: 100 mm Delovni pomik Z osi: 100 - 3500 mm/min Orientacija mize: 0 - 30 ° Moč motorja brusilnega vretena: 3 kW Maks. premer brusnega kolesa: 350 mm Maks. širina brusnega kolesa: 30 mm Luknja brusnega kolesa: 127 mm Nos delovnega vretena: W20 Djdpsycim Dofx Ah Ssup Min. hitrost delovnega vretena: 30 obr/min Maks. hitrost delovnega vretena: 1200 obr/min Maks. teža obdelovanca v držalu med središči: 20 kg Obseg zasuka obdelovanca: 0° / +90° Moč delovnega vretena: 0,5 kW Tip konjička: MT2 Hod konjička: 20 mm Dimenzije stroja: 2350 x 1480 mm Teža: 1600 kg

Stanje: rabljeno, Leto izdelave: 1990, Grinding length: 1500 mm Dusdpfx Aowlviroh Ssp Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Spindle speed: 1400/2800 rpm Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and retrofitted with a modern control system. Machine is equipped with coolant system, automatic vertical feed, wheel dressing device, and wheel holders.