Skledo vibratorji

KAYAKOCVIB KVM 1000

Stanje: pripravljen za uporabo (rabljen), The machine is in very good condition and can be tested on site. Fpedswvgidjpfx Aplog Technical data - Grinding machine Working area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (rpm): 5000 Feed rate (strokes/min): 150 Table load capacity (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20 or 1:50, suitable for rough grinding. If you have any further questions, please feel free to contact me.

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable Fjdpfx Apet Hw Iielepg from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1983, stanje: pripravljen za uporabo (rabljen), Was used for reworking profile rolls for a hot rolling mill, was regularly maintained, includes accessories, without spare parts, on-site inspection is possible, no videos available. Fpedpfx Apsriwfieleg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, Fpedjp E T N Aopfx Aplsg prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, Oprema: 1 vpenjalni dovod desno Fpjdpfxol D N Hvs Aplog 1 ekscentrična stiskalnica 90 kN 2 ožji sani agregata 3 običajni sani agregata Delovno območje: Območje debeline žice: 0,5 - 3,5 mm Širina traku: maks. 32 mm Dovodna dolžina: maks. 170 mm Kapaciteta: maks. 250/min

Stanje: novo, Cutting capacity at 90° (round): 510 mm Fedpfsd Iipmex Aplspg Cutting capacity at 90° (square): 450 mm Cutting capacity at 90° (rectangular): 650 x 450 mm Blade speed: 15 – 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter bandsaw K-tech DG 62/45 HA-I • 2-column miter bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (disinfection) • Energy-saving and low vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure regulation valve • Hydraulic control of saw frame and clamping vice • LEDs for monitoring all safety functions • Large-diameter drive wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to material start or, in series cutting, directly cut 4. Saw blade off 5. Raise frame just above the material 6. Clamping vice opens

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1984, Load capacity: max. 300 kg Reel plate diameter: 1,000 mm Fpodof S I I Hopfx Apleg Maximum outer coil diameter: 900 mm Inner coil diameter: 240 - 560 mm Maximum coil width: 180 mm

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Fpjdpfx Apsfn Aqloleg motorized decoiler

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Tehnični podatki: Tlak: 10 bar Pretok zraka: 1080 l/min Napetost: 400 V Pogonska moč: 7,5 kW Teža: 431 kg Glasnost: 63 dB(A) Izhod zraka: 3/4'' Dimenzije (ŠxGxV): 1950 x 690 x 1700 mm Fpodoxq Elwepfx Apljg S vgrajenim hladilnim sušilnikom, avtomatskim izpustom kondenzata, ločilnikom olje-voda.

Stanje: novo, Leto izdelave: 2026, Popolnoma avtomatsko rezanje srednje velikih do velikih aluminijastih profilov z enostavno avtomatizacijo za uporabo. Preprosto odložite kateri koli aluminijasti profil, stroj ga avtomatsko zazna in razreže po nalogah z visoko natančnim servo pomikom materiala. Uvoz Excelovih seznamov nalog preko WIFI za enostaven vnos obsežnih seznamov za razrez. Za vsak kos aluminija, ki ga položite za razrez, ne glede na dolžino, laserski senzor izmeri dolžino. Naš zmogljiv algoritem optimizacije sproti izračuna optimalno zaporedje izreza za minimalne odpadke. Stroj po tem seznamu izrezuje avtomatsko, brez prekinitev. Vmesni vnosi niso potrebni – vi samo prinašate novo zalogo aluminija. Enostavna, hitra alternativa dvo-glavnim žagam. Preprosto vnesete (ali uvozite) potrebne dolžine in kote ter pritisnite GO. Stroj neprekinjeno proizvaja vaše kotne dele, natančno in hitro. • Popolnoma avtomatsko rezanje z avtomatskim podajanjem in rezanjem na dolžino. • Enostaven uporabniški vmesnik za avtomatsko delovanje – vnos naloge in razrez v nekaj sekundah. • Poenostavljeno razrezovanje kosov, serij ali velikih excel seznamov. • Paketno/multi-palčno rezanje in štetje. • Oddaljen vnos excel seznamov nalog prek WIFI z naprednim povezovanjem podatkov. • Popolnoma nastavljiva hitrost podajanja žage in materiala za največjo produktivnost procesa. • Samodejni optimizacijski način z laserskim merjenjem dolžine in minimizacijo odpadkov (opcijsko). • Samodejni izpis etiket za kose na podlagi podatkov iz delovne naloge (ročno lepljenje, opcijsko). • Neposredno vrstično tiskanje na material brez posega operaterja (opcijsko). • Tiskanje ali skeniranje črtnih oz. QR kod za vnos nalog (opcijsko). • Avtomatiziran servo pomik kota žagine glave do ±75° (opcijsko). Odlično primerno za: • Proizvodnjo oken in vrat • Proizvodnjo aluminijastih kotnih konstrukcij • Proizvodnjo aluminijastih sestavljenih konstrukcij • Proizvodnjo kompozitov • Proizvodnjo žaluzij, senčil in pohištva • Trgovino z aluminijem Model: A550 Dolžina: 3 m Linearni pogon: ProfiStop Alpha Dolžina materiala: 1680 mm Potisna zmogljivost: 20 – 40 kg Fpjdpfx Apof Ekn Islog Programska oprema: Optimiser KAKOVOSTNI STROJI IZ AVSTRALIJE.