Avtomatska tračna žaga - vodoravna

KASTO SBA 260 AU

Stanje: dober (rabljeno), Leto izdelave: 1998, skupna višina: 1.700 mm, skupna dolžina: 2.100 mm, skupna širina: 2.260 mm, Obseg rezanja okroglega jekla pri 90°: 260 mm, skupna masa: 1.300 kg, Automatic bandsaw, cutting capacity Ø 260 mm, 90° cut, infinitely variable blade speed 17–110 m/min, dual-speed 2.3 kW motor, coolant system, chip conveyor, piece counter, variator gearbox, adjustable hydraulic material clamping, dimensions 2260 x 2100 x 1700 mm, weight approx. 1300 kg. Ihodpfx Afemxliwo Tet

Stanje: rabljeno, Leto izdelave: 2018, DEMAG mostno dvigalo – Nosilnost 16 ton – Letnik 2018 Proizvajalec DEMAG Cranes & Components GmbH – Nemčija Tip Industrijsko motorizirano mostno dvigalo – enojni ali dvojni nosilec Industrijska uporaba Za težka dviganja v jeklarnah, proizvodnih delavnicah, kotlarstvih, splošni strojni obdelavi in logističnih skladiščih Ihodpfx Ajxb D Nvjf Tot Glavne tehnične specifikacije: - Nazivna nosilnost: 16 ton (16.000 kg) - Leto izdelave: 2018 - Proizvajalec: DEMAG – globalni vodilni v industrijskem dviganju - Motorizirano premikanje po tirnicah - Električni vitel z jeklenico (DEMAG standard, velika nosilnost) - Napajanje: industrijski trifazni tok - Upravljanje: obesek ali radijsko daljinsko upravljanje (odvisno od konfiguracije) - Stanje: rabljeno – nedavno, robustna zasnova 🧩 Uporaba stroja DEMAG mostno dvigalo z nosilnostjo 16T je zasnovano za težka dviganja v zahtevnih industrijskih okoljih. Velika nosilnost ter sodobna konstrukcija zagotavljata učinkovitost, varnost in dolgo življenjsko dobo. ⚙️ Značilnosti / prednosti - Srednje visoka nosilnost (16T) za težje industrijske procese - Sodobna izdelava (2018) skladna z aktualnimi varnostnimi standardi - Vgrajeni DEMAG vitel in električni sistemi - Možnost integracije avtomatizacije in daljinskega upravljanja

Stanje: rabljeno, Leto izdelave: 1993, Cutting diameter: 260 mm Cutting width: 400 mm Ihodpfx Afev T Nrks Tjt Cutting range at 90 degrees, flat: 400 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Cutting range at 45 degrees, round: 260 mm Band speed: 17 - 110 m/min Motor power: 3.5 kW Saw blade dimensions: 3830 x 25 x 0.9 mm Machine weight: approx. 1.3 t Space requirement: approx. 2.1 x 2.0 x 1.6 m High-performance fully automatic band saw with - Coolant system - Documentation

Stanje: rabljeno, Leto izdelave: 1995, Cutting diameter: 260 mm Saw band length: 3830 x 27 x 0.9 mm Ijdpfx Afjwhqxme Toht Cutting range (flat): 310 x 260 mm Cutting range (square): 260 x 260 mm Cutting speed, stepless: 19-110 m/min Feed length: 750 mm Multiple feed length: 6750 mm Material support height: 700 mm Machine weight: approx. 1.4 t Dimensions: approx. 2100 x 2300 x 1720/1300 mm Incl. various saw bands Incl. chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: Iodev Drigspfx Af Tsht X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Ihjdpfju Nc Emsx Af Tjt Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm Ihodpoq Evn Eefx Af Tjt - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm For more details, see the attached description! Ihsdpfer A Dfyjx Af Tot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Iedpfew Rl S Sjx Af Tsht Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.