Skladiščno dvigalo

Kardex XP 250 C3000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Zunanje mere: Višina: 5650 mm Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Širina: 2.780 mm Globina: 2.312 mm Mere zabojnika: Višina: 55 mm Širina: 2450 mm Globina: 864 mm Nosilnost police: 270 kg na predal Število polic: Število na željo stranke. Skupna nosilnost: 2 x 33.150 kg Nedpfoxmgwasx Agxowf Število izvzemov: 1 Barva: modra Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Prodaja izključno v DACH-države (Nemčija, Avstrija, Švica) in Beneluks (Nizozemska, Belgija, Luksemburg). Obveščamo vas, da trenutno prodajamo ali dostavljamo samo v D-A-CH in Be-Ne-Lux države. Prosimo za vaše razumevanje.

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 500 mm Y-axis travel: 500 mm Nsdpfx Ajtv Ia Tjgxswf Z-axis travel: 350 mm Table size: 800 x 450 mm Spindle taper: ISO 40 Quill stroke: -- mm Feeds – longitudinal & cross: -- mm/min Feeds – vertical: -- mm/min Max. spindle speed: 3,150 rpm Supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Stanje: zelo dobro (rabljeno), 2 dvižni sistemi, Kardex XP 500, pribl. 7,35 m visoka, 240 oz. 495 kg na polico, Polica: pribl. 2,45 m x 81 cm – rabljeno - : Cena na kos iz lokacije: 26.950 € (neto), demontirano, zapakirano in naloženo, brez prevoza in ponovne montaže! Proizvajalec: Kardex Tip: Shuttle XP-500-2450-813 Št. naprave: 17001175/001 Letnik: 2017 Dovoljena skupna nosilnost: 2x33.500 kg Nosilnost na polico: light 240 kg / strong 495 kg Število polic: bo naknadno posredovano Dimenzija police: 2450 x 813 mm Dimenzije naprave: Širina: pribl. bo naknadno posredovano (najverjetneje pribl. 2,78 m) Globina: pribl. bo naknadno posredovano (najverjetneje pribl. 2,92 m) Nwsdpfjx Ry Ddox Agxsf Višina: pribl. 7.350 mm 3/N/PE400V, 17,0A, 5,6 kVA Stanje: dobro – zelo dobro, na splošno malo uporabljano Na voljo: od pribl. sredine januarja 2026 Lokacija: 71063 Sindelfingen

Stanje: dober (rabljeno), Leto izdelave: 1994, obratovalne ure: 14.000 h, * Dizelski viličar * 14.000 delovnih ur * Nosilnost 16.000 kg * Volvo motor * Dvižni steber, višina dviga 5.000 mm * Gradbena višina 4.100 mm * Naprava za nastavitev vilic Nwedpfxew Hydps Agxsf * Lastna teža 25.000 kg * Takoj pripravljen za uporabo

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Nwjdjd Ixadspfx Agxof Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition Nwodpfjcxxu Djx Agxjf

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Nwodpfx Aot Hw Nysgxef Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 Nsdpfet Hw S Iox Agxowf portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Leto izdelave: 2025, stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. Nwjdjghf R Uspfx Agxjf ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp Nedpfx Asxwl T Usgxjwf