Ogrevanje dvorane

Kampmann Tip 5000 2-Stufen 157000573036

Stanje: dober (rabljeno), Grelnik zraka, ogrevanje, toplotni izmenjevalnik, zračni grelnik, kanalski zračni grelnik, kanalski toplotni izmenjevalnik, grelni register -Proizvajalec: Kampmann, toplotni izmenjevalnik zračnega grelnika Nodpju N Sibjfx Agxela -Tip: Tip 5000, 2-stopenjski, 157000573036 -Moč: 53,5/64,9 kW -Ventilator: Ziehl-Abegg -Obratovalni tlak: max. 16 bar -Količina: 1 kos na voljo -Dimenzije: 800/390/H880 mm -Teža: 49 kg

Stanje: novo, Leto izdelave: 2026, Sestava sistemov za ravnanje s korpusi za izdelavo ročne, polavtomatske ali popolnoma avtomatske montažne linije za korpuse je vedno izvedena glede na zahteve stranke. Nljdpfx Aodx R D Degxoa Montažne linije za korpuse, ki vam olajšajo delo, zmanjšajo čase nastavljanja ter povečajo proizvodno zmogljivost, vam z veseljem podrobno predstavimo ob osebnem pogovoru.

Stanje: dober (rabljeno), Heating fan, heater, heat exchanger, air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power output: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max. 10 bar -Quantity: 2 air heaters available Nsdpju Scqhofx Agxjla -Price: per unit -Dimensions: 800/710/H730 mm -Weight: 49 kg/unit

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Nljdpfx Aork Tqkogxea RUWI Three-Spindle Under-table Router Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks, quickly delivering the desired result. Rapid tool changes are possible thanks to the conveniently accessible tool magazine. With the larger models, setup times are increasingly reduced. Costly and time-consuming fine adjustments and test milling are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the optimal working position. This model is ideally suited for workshop use and is often utilized for finishing. Made in Germany. Features and Technical Data: - High-quality construction - 3 tools available at any time - Electronic speed control prevents RPM fluctuations under load - Robust and high-performance motor - Motor with overload protection - Temperature monitoring via PTC resistor - Soft start and inrush current limiter - Reverse feed thread above ball bearings reduces ingress of dust and debris - Fast tool change - Dust extraction above and below the table top - 1x fine adjustment - Including stop ruler - Including mounting kit for table extension - Convenient tool change from above - BG and wood dust certified Technical Data: - Table size: 640 x 500 mm - Table height: 910 mm - Variable speed control: 8,000 – 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial operation - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optionally 6 mm, 6.35 mm, and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: Short-term Location: Solingen

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 0-261-07-5143, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 12 mm, Stroj je v zelo dobrem stanju. Ogled na lokaciji ni težava. Ta stroj je še vedno popolnoma v uporabi. Njdsycxgaopfx Agxsla

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: Nlsdpfxexwaz Ho Agxea - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4–6 mm SPS screen control Edge-Control PPC 221, colour display Pre-milling unit for jointing before the gluing section Nledpfx Agsyyl U Hjxea Fully automatic edge magazine for coil and strip material Glue application station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Glue application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment Pressing section 1912-3, pneumatic End trimming unit 1918, pneumatic, for coil and strip material up to 8 mm edge thickness With pneumatic adjustment 0–10° tilt for end trimming saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius trimming – chamfer trimming – 15° 1827 MOT NC axes controllable via control panel Corner rounding unit 1832 SPS for rounding corners up to 3 mm edge thickness in throughfeed Scraper unit for chamfers and radii, with 2 MOT scraper holders Flat scraper unit – finish Spray device – PU Complete DIA tooling included Low operating hours / from a craft business Machine is WORKSHOP-OVERHAULED and in TOP CONDITION Available ex-stock Lieboch

Stanje: novo, Cantilever rack, single-sided, frame height 2.60m, 80cm deep arms, 750kg per arm, hot-dip galvanized – New item: Price ex works incl. loading! Price: €1,480 (net) Transport/packaging costs within Germany (excluding islands): €400 (net) Of course, you can also construct longer or shorter racking units by omitting or purchasing additional frames (or by varying the center distances between frames), this example with 4 frames merely reflects the most common racking configuration! Cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new item Description: - Single-sided rack uprights, height 2,600 mm, hot-dip galvanized - Base and arm depth: 800 mm - Each with 3 height-adjustable rack arms - Load capacity at a load center of 400 mm - 750 kg per arm / 2,250 kg per upright - With 4 uprights per storage level: 4 x 750 kg = 3,000 kg Profiles: Uprights: IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing The standard frame center distance is 1.30 m. Other standard center distances available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m From a length of 1.50 m onwards, a small surcharge applies to the stated price! Custom dimensions (different frame spacings) are also available on request but also incur a surcharge and have a longer delivery time as they must be custom-made! Unless otherwise specified, racks are delivered with a center distance of 1.30 m. In this case, the total length for a rack row with 4 uprights (3 bays) is approx. 4m. Nedpfxsnwmwvo Agxela Delivery includes all bolts and nuts (shipping within Germany via parcel direct from Würth), ground anchors not included. When using more arms per upright, please note that the specified maximum load capacity per upright must not be exceeded, i.e., the maximum usable arm load decreases accordingly. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at a surcharge), photos attached: - Base with load protector - Base with large load protector - Base with wheel guard - Cantilever arm with load protector - Cantilever arm with plug-in roll-off guard - Clamp-on roll-off guard - Grating - Conversion for pallet storage Photos show example single-sided racks and the materials used.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, LANGZAUNER LZG-S 10/7/14 Table size: 2,750 x 1,000 mm, belt length: 7,300 mm Nsdpsumq Szjfx Agxela Description: - Infinitely variable electronic speed control - Electric table height adjustment - Sanding belt cover - Central, user-friendly control panel - Workpiece illumination - Reversible belt direction (right/left) - Motor brake - Adjustable workpiece stop - Removable table insert - Suitable for sanding drawer fronts - Sanding table guide with hardened, ground guide shaft - Enclosed belt drive pulley - Dust-tested - CE compliant ----- Technical Data ----- Throat depth: 1,000 x 350 mm Motor 400 V: 5.5 kW Removable table insert: 510 x 630 mm Sanding shoe: 320 x 150 mm Table height adjustment range: 350 mm 6-fold ball bearings per side Belt speed: 22 m/sec Extraction port diameter: 180 mm Weight: 900 kg Very good condition, see pictures.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Vakuumska črpalka / Vakuumski sistem Volumenski pretok: 280 m3/h Motor: 7,5 kW Vakuumska posoda: 500 L Nlsdpfexcb Ixsx Agxja