Viličar

Kalmar GCE75-6

Leto izdelave: 1997, stanje: dober (rabljeno), Leto izdelave: 1997 Dedpfx Adedym Stjtjck Mere: 311 x 355 mm Hitrost: 9.000 izvodov/uro Oprema: verižni sistem za zbiranje in podajanje: • 8 postajni verižni sistem • z dvojnim podajalnikom • 1 podajalnik za zlaganje enota za šivanje in obrezovanje: • enota za šivanje • 2 šivalne glave • obrezovalnik • transportni trak z merilnikom

Leto izdelave: 2006, stanje: dober (rabljeno), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Dcodpfx Adodtr A Tetsk Tested and inspected,

Leto izdelave: 2015, stanje: novo, Shaft furnace Clear height: 1100 mm Clear diameter: 790 mm Outer diameter: 1560 mm External height (without lid): 1480 mm External height (incl. lid): 2300 mm Electrically heated: 40 kW Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Maximum temperature: 750°C Dcodpfx Adocdi D Dstek

Leto izdelave: 2022, obratovalne ure: 400 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 spacing: 36 mm Screen deck 2 spacing: 24 mm - Pre-screen deck with long hopper and variably adjustable dosing roller - Volume measurement via loading Dcjdpfjrt Uvzex Adtek - Preparation for air separator - Compressor - LED lighting package - Remote control for all key settings via radio - Diesel-electric drive 80 kW - Axle leveling system - Twin axle, approved for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, general waste, RDF, various recycling materials (not suitable for construction debris or excavated material) Miscellaneous: Very good used condition, fully operational

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As-new condition: barely used - Documentation available (both electronic and physical) - Includes pallet with spare parts TECHNICAL SPECIFICATIONS Model: RWO 360/400-1150 Max. furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C at the end of the stabilization period Dcjdpfoiryyajx Adtok Control voltage: 230 VAC / 24 VDC Furnace work chamber: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum (cold, clean and dry furnace): < 5 * 10⁻⁵ mbar Footprint: 900 x 1900 x 3000 mm Total equipment weight approx.: 1500 kg Sound pressure level: < 70 dB No liability is assumed for the correctness, completeness, or currentness of the information provided.

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Dcodpfx Adshpqqujtek Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Leto izdelave: 1998, stanje: dober (rabljeno), Izdelano leta 1998. Maksimalne dimenzije: 305 x 420 mm. Dimenzije po obdelavi: maks. 300 x 400 mm min. 100 x 100 mm Debelina bloka listov: maks. 80 mm min. 2 mm Višina podajanja: 80 mm Hitrost: maks. 3.900 izvodov/uro Dolžina: 2.400 mm Širina: 3.060 mm Višina: 1.740 mm Teža: 5.290 kg (približno) Oprema: • samodejni podajalnik z integriranim predstikalnikom • podajanje z roko • števec izrezanih listov • samodejna regulacija hitrosti • pihalo za odstranjevanje odrezkov • oprema za podajanje listov • 1 komplet pritrdilnih plošč in držal • 1 komplet rezalne mize • 3 kompleti rezalnih letev • 2 kompleta nožev • samodejna blokada za nastavitev in pritisk noža • zunanja naprava za menjavo nožev Dedpfxofu H Sxj Adteck • pomožni sistem • samodejna nastavitev: • - podajalnega sistema • - pritiska bloka listov • - rezalne mize • - stranskih nožev • - stranskih vodil • - višine držala za izmet • centralno mazanje • držalo za izmet

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres Djdpforgzv Nsx Adtock * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996 Maksimalna velikost: 480 x 320 mm Obrezana velikost: 480 x 320 mm min. 153 x 108 mm Obrezana velikost: maks. 475 x 300 mm min. 148 x 105 mm Debelina materiala: maks. 13 mm Hitrost: maks. 13.000 kosov/uro Število rezalnih glav: maks. 6 Oprema: transportni sistem s verigo in podajalnikom rezalni stroj s tremi rezili Dcedpfx Adod N D Ntjtek

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee - Working width: 500 mm Dodpfoc R S E Sox Adtock - Battery charger included - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg