Polni zabojnik reachstacker

Kalmar DRG450-82S5HCXS

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Industrial steam boiler Brand: Loos Bosch Group Model: U-ND 800 Serial number: 109582 Year of manufacture: 10/2011 Total capacity: 1108 liters Steam output: 800 kg per hour with Weishaupt GmbH burner Burner type: WM - L10/3-A Year of burner manufacture: 2011 Pgjdpfx Ajv I E Tgondsn Minimum output: 250 kW Maximum output: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm Achenbach GmbH storage tank Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm Burner completely overhauled in 2024.

Stanje: rabljeno, 4 stainless steel tank containers, used Capacity: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data (per type plate): 1 tank: -0.4/+4 bar operating pressure, 150°C 1 tank: -0.4/+3 bar operating pressure, 110°C 1 tank: +3 bar operating pressure, 120°C 1 tank: +4 bar operating pressure, 130°C Design: Cylindrical horizontal vessel in 20' transport frame with dished ends Pjdpfxsv Dtgas Andsgn Half-pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating overpressure Insulation: 50 mm around cylinder and ends Connections: 2 manholes DN 500 on the top centerline plus various connections Outlet at front end Weight: approx. 4.4 t Optional: Frame for 4 tank containers made of painted mild steel, delivered disassembled for transport External dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height Additional price on request.

Stanje: rabljeno, Leto izdelave: 1996, Vollmer CHC 260, leto izdelave 1996 Pgsdoyuc Ifspfx Anden

Stanje: rabljeno, Leto izdelave: 2007, Suitable for the automatic machining of PCD-tipped cutters, shank tools, and disc-shaped tools such as saws, cutters, etc. using the wire electrical discharge machining (EDM) process. Equipment: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system - N181 extraction unit - Measuring probe - Machine lamp - Automatic central lubrication - ISO50 workpiece holder - Measuring arbor Maximum cutter outside diameter: 250 mm Maximum cutting length: 260 mm Shank tool diameter: 10 - 250 mm Maximum outside diameter of disc-shaped tools: 250 mm Maximum tool weight: 20 kg Travel X-axis: 275 mm Pedpfx Aewtmg Djndsgn Travel Y-axis: 300 mm Travel W-axis: 200 mm A-axis taper: ISO 50 E-axis swivel range: 180° Machine dimensions (L x W x H): 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047

Stanje: novo, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate weight: 2,400 kg Total power requirement: 4 kW Pre-bending: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roller diameter: 170 mm Equipment • 3 rollers • Asymmetrical roller arrangement – with pre-bending • Swing-out top roller to the front • Motorized right-left control • Conical rolling by tilting the rear roller • Operation via foot pedal Podpod Ab Haefx Andogn • Hardened rollers • Digital display See catalog at the following link:

Stanje: rabljeno, prevoženi kilometri: 372.496 km, moč: 115 kW (156,36 KM), konfiguracija osi: 4x2, emisijski razred: Euro 4, vzmetenje: jeklo, Leto izdelave: 2009, Suspension: Leaf spring Gross vehicle weight: 7,490 kg Please contact Emal Jaweed for further information. Meiller three-way tipper, Mercedes-Benz Vario 816D, year of manufacture 2009, first registration: 24.04.2009, mileage: 372,497 km, length: 6,265 mm, width: 2,320 mm, height: 2,470 mm, unladen weight: 3,905 kg, permissible total weight: 7,490 kg, engine power: 115 kW, axle load: 1. 2,500 kg 2. 5,600 kg, displacement: 4,249 cm³, loading area dimensions: length: 3,150 mm, width: 2,270 mm, height: 380 mm, wheelbase: 3,700 mm, video available, 6-speed manual gearbox, Euro 4, trailer coupling, towing eye, diesel particulate filter, suspension: leaf/leaf, German vehicle, 7 seats Other information: * We offer over 200 vehicles for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing possible. * Specialist for worldwide transport & shipping. * No liability for printing or typographical errors. * Errors and prior sale excepted. Pgjdpfx Aox R T Upondon * Trade-in possible! * For vehicle purchase/used equipment sales, only the terms and conditions of Jaweed GmbH apply. * Further information and our general terms and conditions can be found on our website. We are selling our goods exclusively with our general terms and conditions (listed: ... / AGB).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Pgsdpfxsx D S Eks Andon Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F222E01655W, Leto izdelave: 2022, obratovalne ure: 4.500 h, nosilnost: 46.000 kg, dvižna višina: 15.190 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 4.700 mm, moč: 240 kW (326,31 KM), lastna masa: 71.900 kg, vrsta pogona: Diesel, Full-container reach stacker Chassis number: F222E01655W Mast type: Telescopic Transmission: SOH TE-30 Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Pneumatic Front tyres size: 18.00-25 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 18.00-25 Rear tyres condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website – hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Give me, Marco Levermann, a call—I'm happy to advise you in detail about this MAKE - MODEL. By the way: Our specialist forklift workshop is focused on repair and servicing of large equipment from 8 tonnes upwards. We can also sell your vehicle on consignment at our facility. Central Lubrication = Central Lubrication Movable cabin = Movable cabin Pedpsx H U R Refx Andsgn Full cabin, air conditioning, joystick control Camera, extra seat

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The CORMAK SH-30S PRECISA spindle moulder, available in both 400V and 230V versions, is a highly efficient and precise woodworking machine designed for professional wood processing in industrial facilities, joineries, and craft workshops. Its robust construction, interchangeable spindle, and wide range of spindle speeds ensure the highest standard of operation for machining both straight and complex-shaped components. Pgsdpfovugf Dsx Anden Key machine features: - Stable cast iron table construction guarantees excellent vibration damping and perfect material glide. - Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm enables processing of various wood types and wood-based materials. - Reinforced and balanced spindle provides quiet, precise, and vibration-free operation. - Height adjustment with an integrated scale allows for accurate setting of machining parameters. - Comprehensive standard equipment included – tilting fence, workpiece holder, and assembly tools. - Meets all occupational health and safety, technical documentation, and CE standards – ensuring safe operation and compliance with regulations. Construction and technology: The design of the CORMAK SH-30S PRECISA spindle moulder is based on a solid, high-grade cast iron body, effectively eliminating unwanted vibrations during operation. The worktable, measuring 620 x 510 mm, is precisely ground to ensure uniform material slide. The 2.2 kW (400V) motor guarantees sufficient power even during intensive use. With a spindle stroke of 100 mm and a maximum clamping height of 105 mm, the machine handles a wide range of milling tasks with ease. Precision and productivity: The CORMAK SH-30S PRECISA spindle moulder combines high build quality with advanced functionality. Multi-stage spindle speed control facilitates optimal adjustment of operating parameters to the type of material and tool profile. Precision guides and stops allow for exact reference point setting, translating into repeatability and high quality of the finished workpiece. Application areas: The CORMAK SH-30S PRECISA is suited for: - Professional joineries and manufacturing plants - Furniture-making and craft workshops - Production of decorative mouldings, grooves, tenons, and finger joints - Edge machining of straight and curved workpieces Standard equipment: - Tilting fence 60° left/right - Workpiece holder - Workpiece stop - Anti-slip feet - Assembly tools Optional equipment: Interchangeable spindle with ER20 collet chuck allows for fast tool changes and quick adaptation to various tooling (price: 700 PLN net) Technical specifications CORMAK SH-30S PRECISA spindle moulder – cutting angles: Motor power S1: 2.2 kW Voltage: 400V or 230V Table dimensions: 620 x 510 mm Table height: 860 mm Extraction port: 100 mm Spindle stroke: 100 mm Max. clamping height: 105 mm Table opening: 160 mm Max. tool diameter under table: 150 mm Spindle speed: 1400 / 4000 / 6000 / 9000 rpm Spindle diameter: 30 mm Gross weight: 126 kg Overall dimensions: 640 x 660 x 1250 mm

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Podpfxjd Ab H Is Andegn Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended